KCSU - Keysystem configuration in switching unit

• The LINE keys necessary for selecting a line must be present in the key layout of the terminal (separate keysystem-specific key standards are available for the different optiset E, optiPoint 500 and optiIP terminals - AMO TAPRO, DIGTYP=OPTISET, STD=19 .. 255)
• The optiset E and optiPoint 500 terminal must be added (AMO SBCSU) either
  - on a SLMO (FCTID=1) module or
  - on a SLMQ-EXT module (code number Q2153-X) or
  - on a SLMQ3 module or
  - on a STMA (FCTID=4) module or
  - on a WAML (FCTID=2) module or
  - as a signed-off station,
• the optiIP terminal must be added (AMO SBCSU)
  - on a STMI2-HFA (CGW) module
  and should be
  - a terminal with display (AMO SBCSU, DIGNODIS=N)

• TYPE=PRIM :
  For converting an optiset E/optiPoint 500/optiIP into a keyset, with allocation of the primary line;
  for changing, displaying and regenerating the data which belong to the primary line;
  and finally, for deleting the primary line and thus the keysystem functionality, i.e. reconverting the keyset to an optiset E/optiPoint 500/optiIP.
• TYPE=SEC :
  For adding and deleting secondary lines;
  for changing, displaying and regenerating secondary line specific data.
  

• Phone always on KEYS 1 - 19: KEYS 01-19 under array idx 01-19
• 16-key configuration DSS1 : KEYS 01-16 under array idx 20-35
• if module has 18 keys : KEYS 17-18 under array idx 84-85+
• 16-key configuration DSS2 : KEYS 01-16 under array idx 36-51
• if module has 18 keys : KEYS 17-18 under array idx 86-87+
• 16-key configuration DSS3 : KEYS 01-16 under array idx 52-67
• if module has 18 keys : KEYS 17-18 under array idx 88-89+
• 16-key configuration DSS4 : KEYS 01-16 under array idx 68-83
• if module has 18 keys : KEYS 17-18 under array idx 90-91+

• Phone (main device) always on KEYS 1-19: KEYS 01-19 under array idx 01-19

• Phone (main device) always on KEYS 1-32: KEYS 01-32 under array idx 01-32
• 16-key configuration DSS1 : KEYS 01-16 under array idx 33-48
• 12-key configuration DSS1 : KEYS 01-12 under array idx 33-44
• 16-key configuration DSS2 : KEYS 01-16 under array idx 49-64
• 12-key configuration DSS2 : KEYS 01-12 under array idx 49-60
• 16-key configuration DSS3 : KEYS 01-16 under array idx 65-80
• 12-key configuration DSS3 : KEYS 01-12 under array idx 65-76
• 16-key configuration DSS4 : KEYS 01-16 under array idx 81-96
• 12-key configuration DSS4 : KEYS 01-12 under array idx 81-92

Cross Reference to Other AMOs:

Functions

Procedure Overview

ADD-KCSU

• TYPE=PRIM
  • A normal optiset E/optiPoint 500/optiIP (i.e. without keysystem functionality) is reconfigured into a keyset (parameter STNO)
  • The LINE key to be used for the user's own line (primary line) is defined (parameter PRIMKEY)
  • The way in which an incoming call is signalled on the user's own line (primary line) is defined for the keyset, i.e. whether a call is indicated only by visual means (LED signalling + display) or additionally by ringing tone (parameter RIOP)
  • A preference for automatic line selection for outgoing calls can be defined for the keyset, e.g. that either any free line or only the primary line is to be used (parameter ORLNPF)
    - if a preference is not specified, the line must be selected manually for every outgoing call by pressing a LINE key
  • A preference for automatic line selection for incoming calls can be defined for the keyset, e.g. any calls on lines with ringing tone signalling are collected before calls on lines with purely visual signaling (parameter TMLNPF)
    - if a preference is not specified, the line with the incoming call must be manually selected by pressing the corresponding LINE key
  • In the case of manual line selection, it is possible to specify for the keyset whether a line is immediately seized when a LINE key is pressed or whether the action of pressing a LINE key merely represents a preselection of the line to be used for a limited period (and that the line is only seized when the handset is raised or when the user presses the speaker, name, direct call, last number redial or a number key of the dialling pad) (parameter SGLBMOD)
  • It is possible to specify for the keyset whether, when a call has already been established, a new call (on a line with ringing tone signalling) is to be indicated not only by an LED but by also an additional attention tone (parameter BUSYRING)
  • It is possible to specify for the keyset whether every call is automatically to be considered as a private call so that other keysets are not able to intrude into the call (parameter APRIVAT)
  • It is possible to specify for the keyset whether (if there is a headset on the keyset) calls arriving on the primary line are to be automatically collected (parameter AICS)
  Note :
  • The original optiset E/optiPoint 500/optiIP must be deactivated either beforehand with the AMO DSSU or by using the OFFTYPE parameter in the ADD command.
  • This is also applicable for signed-off stations !
  • If deactivation has been ordered by the AMO KCSU (parameter OFFTYPE), the system returns to the initial dependability status following the reconfiguration process.

• TYPE=SEC
• The secondary lines can be administered for a keyset (!) (parameter STNO)
• The LINE key to be used is defined for every secondary line (parameter KYNO)
• The number belonging to the LINE key is defined for every secondary line (parameter STNOSEC)
• The way in which an incoming call is signalled on a line can be defined for every secondary line, i.e. whether an incoming call is to be indicated only visually (LED signalling + display) or additionally by means of ringing tone (parameter RIOP)
• It is possible to specify for every secondary line whether, if there is a headset on the keyset, calls arriving on this line are to be automatically collected (parameter AICS)
• A keyset can not be used as master or secondary phone in an ONS group.
Note :
• The actual keyset (parameter STNO) as well as all other relevant keysets (parameter STNOSEC) must be deactivated either beforehand with the AMO DSSU or by using the OFFTYPE parameter in the ADD command.
• This is also applicable for signed-off keysets !
• If deactivation has been ordered by the AMO KCSU (parameter OFFTYPE), all affected keysets are subsequently returned to their initial dependability status.

Examples

1. Reconfigure optiset 4740 to keyset 4740 and put primary line on key number 1.
   Incoming calls on the primary line shall be signalled by ringing tone.
   For the automatic line selection for outgoing calls the primary line shall be used, while for incoming calls the lines with ringing tone shall be preferred.
   Pressing any LINE key shall always result not only in selection, but also simultaneous seizure of the line.
   An additional incoming call will be signalled by an alert ring (only for a line with ringing option).
   Every call shall be treated as a private call, i.e. no other keyset can enter the line.
   The automatic incoming call signalling option defaults to the input value for the ringing option (RIOP=YES), so an incoming call on the primary line (if a headset is present) will be automatically collected.
   The optiset 4740 is implicitly deactivated by the KCSU and reactivated following the reconfiguration process.
   
   Input

   ADD-KCSU:STNO=4740,TYPE=PRIM,PRIMKEY=1,RIOP=YES, 
                      ORLNPF=PRIME,TMLNPF=RING, 
                      SGLBMOD=YES,BUSYRING=ALERT,APRIVAT=YES, 
                      SLKTYP=SLKSTNO;

   Output

   H01: THE STATION 4740 IS NOW ASSIGNED AS A KEYSET. 
   H02: THE STATION 4740 IS RELEASED FOR CALL PROCESSING.



2. Add secondary lines 2163, 2164 and 2175 on key numbers 7, 8 and 9.
   Incoming calls for 2163 and 2175 shall be signalled by LED + ringing tone, for 2164 only by LED.
   The automatic incoming call signalling option defaults to the input value for the ringing option (RIOP=YES&NO&YES), so an incoming call for 2163 and 2175 will be automatically collected (if a headset is present), while for 2164 the loudspeaker key must be pressed.
   The affected keysets 4740, 2163, 2164 and 2175 are implicitly deactivated by the KCSU and reactivated.
   
   Input

   ADD-KCSU:STNO=4740,TYPE=SEC,KYNO=7&8&9,STNOSEC=2163&2164&2175,RIOP=YES&NO&YES;

CHANGE-KCSU

• TYPE=PRIM
  • Position of the LINE key belonging to the user's own line (primary line) (parameter PRIMKEY)
  • The way in which an incoming call is signalled on the user's own line (primary line) (parameter RIOP)
  • Preference for automatic line selection for outgoing calls (parameter ORLNPF)
  • Preference for automatic line selection for incoming calls (parameter TMLNPF)
  • Fundamental functioning of the LINE keys with manual line selection (parameter SGLBMOD)
  • Additional signalling of a further call (on a line with ringing tone signalling) (parameter BUSYRING)
  • Automatic identification of private calls (parameter APRIVAT)
  • Automatic collection of calls arriving on the primary line (where there is a headset on the keyset) (parameter AICS)
  Note :
  • The affected keyset (parameter STNO) must be deactivated either beforehand with the AMO DSSU or by using the OFFTYPE parameter in the CHANGE command.
  • This is also applicable for a signed-off keyset !
  • If deactivation has been ordered by the AMO KCSU (parameter OFFTYPE), the system subsequently returns to the initial dependability status.

• TYPE=SEC

• Position of a LINE key belonging to a secondary line (parameter KYNO)
• Number of the LINE key belonging to a secondary line (parameter STNOSEC)
• Way in which an incoming call is signalled on a secondary line (parameter RIOP)
• Automatic collection of a call arriving on a secondary line (where there is a headset on the keyset) (parameter AICS)
Note :
• - The actual keyset (parameter STNO) as well as
  - the new keysets added as secondary lines (parameter STNOSEC) as well as
  - the keysets deleted as secondary lines
  must be deactivated either beforehand with the AMO DSSU or by using the OFFTYPE parameter in the CHANGE command.
• This is also applicable for signed-off keysets !
• If deactivation has been ordered by the AMO KCSU (parameter OFFTYPE), the affected keysets are subsequently returned to the initial dependability status.

Examples

1. Move the primary line for keyset 4740 from key number 1 to key number 5.
   The affected keyset 4740 is implicitly deactivated by the KCSU and reactivated.
   
   Input

   CHANGE-KCSU:STNO=4740,TYPE=PRIM,PRIMKEY=5;



2. Change the ring option for the secondary line 2175 on key number 9.
   The affected keysets 4740 and 2175 are explicitly deactivated by the KCSU and reactivated.
   
   Input

   CHANGE-KCSU:STNO=4740,TYPE=SEC,KYNO=9,STNOSEC=2175,RIOP=YES,OFFTYPE=DI,SLKTYP=SLKSTNO;



3. Change the secondary line belonging to key number 9 from 2175 to 2165.
   The affected keysets 4740, 2175 and 2165 are implicitly deactivated by the KCSU and reactivated.
   
   Input

   CHANGE-KCSU:STNO=4740,TYPE=SEC,KYNO=9,STNOSEC=2165,RIOP=YES;

   
   

DELETE-KCSU

• TYPE=SEC
  • Individual secondary lines (parameter KYNO)
    can be deleted for a certain keyset (parameter STNO)
  • All secondary lines (the parameter KYNO is not specified)
    can be deleted for a certain keyset (parameter STNO)
  Note :
  • The actual keyset (parameter STNO) as well as all other relevant keysets (parameter KYNO) must be deactivated either beforehand with the AMO DSSU or by using the OFFTYPE parameter in the DELETE command.
  • This is also applicable for signed-off keysets !
  • If deactivation has been ordered by the AMO KCSU (parameter OFFTYPE), all affected keysets are subsequently returned to their initial dependability status.

• TYPE=PRIM

• If no further secondary lines are installed, the primary line of the keyset can be deleted and the keyset can thus be reconverted into a normal optiset E/optiPoint 500/optiIP (i.e. without keystem functionality (parameter STNO)
Note :
• The relevant keyset must be deactivated either beforehand with the AMO DSSU or by using the OFFTYPE parameter in the DELETE command.
• This is also applicable for a signed-off keyset !
• If deactivation has been ordered by the AMO KCSU (parameter OFFTYPE), the optiset E/optiPoint 500/optiIP is returned to the initial dependability status following the reconfiguration process.

Example

1. To delete the secondary line on key number 7 for keyset 4740.
   The affected keysets 4740 and 2163 are implicitly deactivated by the KCSU and reactivated.
   
   Input

   DEL-KCSU:4740,SEC,7;



2. To delete all secondary lines for keyset 4740.
   The affected keysets 4740, 2164 and 2165 are implicitly deactivated by the KCSU and reactivated.
   
   Input

   DEL-KCSU:4740,SEC;



3. To delete the primary line for keyset 4740,
   i.e. to reconvert the keyset to an optiset without keysystem functionality.
   The affected keyset 4740 is implicitly deactivated by the KCSU and reactivated following the reconfiguration process.
   
   Input

   DEL-KCSU:4740,PRIM;

   Output

   H05: THE STATION 4740 IS NO LONGER ASSIGNED AS A KEYSET.



4. To delete all secondary lines and the primary line of the keyset 4740,
   i.e. to reconvert the keyset to an optiset without keysystem functionality.
   The affected keysets 4740, 2163, 2164 and 2165 are implicitly deactivated by the KCSU and reactivated.
   
   Input

   DEL-KCSU:4740;

   Output

   H05: THE STATION 4740 IS NO LONGER ASSIGNED AS A KEYSET.

DISPLAY-KCSU

• TYPE=PRIM
  • List of LINE keys (primary line + secondary lines) used for the displayed keyset -
    with the following details
    - the station number belonging to the line (column STNO)
    - the key number belonging to the line (column KYNO)
    - the type of signalling for an incoming call set for the line (column RIOP)
    - the answer mode set for the line (column AICS)
    - busy signalling (LED) desired at partner DSS line key (column DSSLINE)
  As well as the following aspects set for the keyset:
  • Type of additional signalling for a further call
  • Function of the LINE keys with manual line selection
  • Automatic identification of private calls
  • Preference for automatic line selection for outgoing calls
  • Preference for automatic line selection for incoming calls

• TYPE=SEC
• List of all keysets for which the displayed keyset is available as a LINE key -
  with the following details
  - the station number of the keyset for which the displayed keyset exists as a LINE key (column STNO)
  - the key number under which the displayed keyset is entered (column KYNO)
  - the type of signalling for an incoming call set for the line (column RIOP)
  - the answer mode set for the line (column AICS)
  - busy signalling (LED) desired at partner DSS line key (column DSSLINE)

Examples

1. To display the line key assignment of keyset 4740
   
   Input

   DISP-KCSU:4740,PRIM;

   Output
   

     LINE KEY ASSIGNMENT OF STATION NUMBER 4740  
     +---------+--------+--------+--------+---------+---------------+  
     | STATION |  KYNO  |  RIOP  |  AICS  | DSSLINE | SLKTYPE SLKTXT|  
     +---------+--------+--------+--------+---------+---------------+  
     |  4740   |   5    |  YES   |  YES   |         |               |  
     |  2163   |   7    |  YES   |  YES   |   NO    | SLKSTNO       |  
     |  2164   |   8    |  NO    |  NO    |   NO    | SLKSTNO       |  
     |  2165   |   9    |  YES   |  YES   |   NO    | SLKSTNO       |  
     +---------+--------+--------+--------+---------+---------------+  
         NUMBER OF LINE KEYS: 4                  
    
     RING TYPE WHILE STATION BUSY : ALERT    
     SINGLE BUTTON MODE           : YES      
     AUTOMATIC PRIVACY            : YES      
     ORIGINATING LINE PREFERENCE  : PRIME    
     TERMINATING LINE PREFERENCE  : RING     
   



2. To display for which keysets the keyset 4740 is available as a line key
   
   Input

   DISP-KCSU:4740,SEC;

   Output
   

     STNO 4740 APPEARS ON LINE KEYS AT: 
     +---------+--------+--------+--------+---------+---------------+  
     | STATION |  KYNO  |  RIOP  |  AICS  | DSSLINE | SLKTYPE SLKTXT|  
     +---------+--------+--------+--------+---------+---------------+  
     |  4740   |   5    |  YES   |  YES   |         |               |  
     |  2162   |   4    |  NO    |  NO    |    NO   | SLKSTNO       |  
     +---------+--------+--------+--------+---------+---------------+  
         NUMBER USED AS LINE KEY: 2              
   

REGENERATE-KCSU

• An initial stage (TYPE=PRIM) generates the ADD commands which convert all relevant optiset E/optiPoint 500/optiIPs into keysets and assign the primary line data.
• In a second stage (TYPE=SEC), the ADD commands must then be generated for all secondary lines.

Examples

1. Regenerate all keysets of the system
   
   Input (1)

   REGEN-KCSU:,PRIM;

   Output (1)

   ADD-KCSU:2163,PRIM,1,YES,PRIME,RING,YES,ALERT,YES,YES,DC; 
   ADD-KCSU:2164,PRIM,1,YES,PRIME,RING,YES,ALERT,YES,YES,DC; 
   ADD-KCSU:2165,PRIM,1,YES,PRIME,RING,YES,ALERT,YES,YES,DC; 
   ADD-KCSU:2175,PRIM,7,YES,PRIME,RING,YES,ALERT,YES,YES,DC; 
   ADD-KCSU:4740,PRIM,5,YES,PRIME,RING,YES,ALERT,YES,YES,DC; 
      : 
      : 

   
   Input (2)

   REGEN-KCSU:,SEC;

   Output (2)

   ADD-KCSU:2163,SEC,7,2164,YES,YES,DC; 
   ADD-KCSU:2163,SEC,8,2165,NO,NO,DC; 
   ADD-KCSU:2165,SEC,7,2163,YES,YES,DC; 
   ADD-KCSU:2165,SEC,8,2164,NO,NO,DC; 
   ADD-KCSU:2175,SEC,8,2163,YES,YES,DC; 
   ADD-KCSU:2175,SEC,9,2164,NO,NO,DC; 
   ADD-KCSU:4740,SEC,7,2163,YES,YES,DC; 
   ADD-KCSU:4740,SEC,8,2164,NO,NO,DC; 
   ADD-KCSU:4740,SEC,9,2165,YES,YES,DC; 
      : 
      : 



2. To regenerate the primary line data for keyset 4740
   
   Input

   REGEN-KCSU:4740,PRIM;

   Output
   

   ADD-KCSU:4740,PRIM,5,YES,PRIME,RING,YES,ALERT,YES,YES,DC;

   
   
3. To regenerate the secondary line data for keyset 4740
   
   Input

   REGEN-KCSU:4740,SEC;

   Output
   

   ADD-KCSU:4740,SEC,7,2163,YES,YES,DC; 
   ADD-KCSU:4740,SEC,8,2164,NO,NO,DC; 
   ADD-KCSU:4740,SEC,9,2165,YES,YES,DC; 
   

Parameter description

Error Messages

F01: STNO @@@@@@@@@@@@ HAS NOT BEEN CREATED (AMO SBCSU).

F02: STNO @@@@@@@@@@@@ NOT DEFINED AS KEYSET. ASSIGN FIRST:
       ADD-KCSU:@@@@@@@@@@@@,PRIM;

F03: STNO @@@@@@@@@@@@ NOT DEFINED AS OPTISET, OPTIP500 OR OPTIIP DEVICE
     ( DISP-@@@@@@@@:@@@@@@@@@@@@; )

F04: STNO @@@@@@@@@@@@ HAS ALREADY BEEN CONFIGURED AS A KEYSET (AMO KCSU).

F05: STNO @@@@@@@@@@@@ HAS NO LINE KEYS ASSIGNED.
     ( DISP-TAPRO:TYPE=STD,STD=@@@,DIGTYP=OPTISET;  RESP.
       DISP-TAPRO:TYPE=STN,STNO=@@@@@@@@@@@@; )

F06: STNO @@@@@@@@@@@@ IS BUSY.
     REPEAT COMMAND LATER OR
     REPEAT COMMAND BUT USE OFFTYPE=DI OR
     DEACTIVATE BEFORE BY MEANS OF
       DEACT-DSSU:OFFTYPE=DI,TYPE=STNO,STNO=@@@@@@@@@@@@;

F07: ORLNPF FOR ACD KEYSET MUST BE EITHER 'LAST' OR 'PRIME'.

F08: STNO @@@@@@@@@@@@ MAY NEITHER BE IN AN EXEC-SECRETARY GROUP (AMO CHESE)
     NOR BE PREPARED AS SECRETARY (AMO SBCSU).

F09: KYNO @@@ IS ALREADY ASSIGNED TO A LINE APPEARANCE
     ( DISP-KCSU:@@@@@@@@@@@@,PRIM; )

F10: STNO @@@@@@@@@@@@ IS THE WRONG TYPE OF OPTISET FOR CONVERSION TO A
     KEYSET (AMO SBCSU).

F11: @@@@@@@@ @@@ DOES NOT EXIST.
     FOR STNO @@@@@@@@@@@@ THE NUMBER OF CONFIGURED ADD-ON UNITS=@@
     AND THEREFORE ONLY @@@@@@@@ <= @@@ IS ALLOWED.

F12: DELETE STNO @@@@@@@@@@@@ CANNOT BE ACCOMPLISHED.
     THERE ARE STILL SECONDARY APPEARANCES ON THE DEVICE
     ( DEL-KCSU:@@@@@@@@@@@@,SEC; )

F13: @@@@@@@@ @@@ IS NOT DEFINED AS A LINE KEY
     ( DISP-TAPRO:TYPE=STD,STD=@@@,DIGTYP=OPTISET;  RESP.
       DISP-TAPRO:TYPE=STN,STNO=@@@@@@@@@@@@; )

F14: STNO @@@@@@@@@@@@ MUST BE DEACTIVATED.
     REPEAT COMMAND BUT USE OFFTYPE=DI OR
     DEACTIVATE BEFORE BY MEANS OF
       DEACT-DSSU:OFFTYPE=DI,TYPE=STNO,STNO=@@@@@@@@@@@@;

F15: @@@@@@@@ @@@@@@@@@@@@ IS NOT DEFINED AS A KEYSET.

F17: @@@@@@@@ @@@@@@@@@@@@ IS NOT ASSIGNED IN DIAL PLAN
     AS STATION NUMBER
     ( DISP-WABE:GEN,@@@@@@@@@@@@,0&&15; )

F18: KYNO @@@ IS ENTERED MORE THAN ONCE.

F20: INSUFFICIENT MEMORY (WORKSTATION PROTOCOL)
     ( ADD-DIMSU:WSPROT > @@@@@; )

F21: STNOSEC @@@@@@@@@@@@ MAY APPEAR ON @@ STATIONS ONLY.

F22: KYNO @@@ IS NOT ASSIGNED TO A STNOSEC.

F23: DUPLICATE STNOSEC ASSIGNMENT ATTEMPTED.
     CHECK ALREADY ASSIGNED KEYNUMBERS WITH
       DISP-KCSU:@@@@@@@@@@@@,PRIM;

F24: CAN NOT DELETE OR CHANGE APPEARANCE OF A BUSY LINE @@@@@@@@@@@@.
     REPEAT COMMAND LATER OR
     REPEAT COMMAND BUT USE OFFTYPE=DI OR
     DEACTIVATE BEFORE BY MEANS OF
       DEACT-DSSU:OFFTYPE=DI,TYPE=STNO,STNO=@@@@@@@@@@@@;

F25: INSUFFICIENT DATA POOL MEMORY FOR KEY SYSTEM CREATION
     ( ADD-DIMSU:KEYSYS > @@@@@; )

F26: STNOSEC @@@@@@@@@@@@ HAS NOT BEEN CREATED.

F27: CAN NOT CHANGE OR DELETE PRIMARY LINE WITH TYPE=SEC, USE TYPE=PRIM.

F28: THE NUMBER OF VALUES IN RANGES FOR PARAMETER
         KYNO, STNOSEC, RIOP AICS AND DSSLINE
     MUST BE THE SAME.

F29: STNOSEC @@@@@@@@@@@@ IS BUSY.
     REPEAT COMMAND LATER OR
     REPEAT COMMAND BUT USE OFFTYPE=DI OR
     DEACTIVATE BEFORE BY MEANS OF
       DEACT-DSSU:OFFTYPE=DI,TYPE=STNO,STNO=@@@@@@@@@@@@;

F30: KYNO @@@ IS ALREADY ASSIGNED
     ( DISP-KCSU:@@@@@@@@@@@@,PRIM; )

F32: RIOP MUST BE YES, IF TMLNPF=RINGP OR ALERP.

F33: FOR STNO @@@@@@@@@@@@ NO SECONDARY LINE APPEARANCES HAVE BEEN ASSIGNED.

F34: DELETE STNO @@@@@@@@@@@@ CANNOT BE ACCOMPLISHED.
     THIS STATION IS STILL A MEMBER OF A (NETWIDE) TEAM
     ( DISP-AUN:TYPE=TEAM,TEAMNO=@@@;  RESP.
       DEL-AUN:TYPE=GR,GRNO=@@@@; )

F35: INSUFFICIENT MEMORY (SLKTEXT)
     ( ADD-DIMSU:SLKTEXT > @@@@@; )

F36: AN ONS MEMBER CAN NOT BE CONFIGURED AS SECONDARY LINE ON A KEYSET.

F37: @@@@@@@@@@@@ DRPRIO CAN NOT BE ADDED BECAUSE DSSLINE(SDAT) IS NOT ADDED.

F38: PRIME TLNNU @@@@@@@@@@@@ AND SECONDARY TLNNU @@@@@@@@@@@@ .
     MUST BE IN SAME VIRTUAL NODE.

F40: TWINNING=YES IS NOT ALLOWED FOR STATIONS WITH MORE THAN TWO LINE KEYS.

F41: A SECONDARY LINE CANNOT  BE CONFIGURED FOR CMI DEVICES WHEN TWINNING = YES.

F42: EMERGENCY NUMBERS CANNOT BE CONFIGURED AS A KEYSET.
     (CHECK EMERGPLN ATTRIBUTE IN DISP-SDAT:@@@@@@@@@@@@;)

F43: WHEN TWINNING=YES, THE SECONDARY LINE MUST BE CMI OR HFA-WLAN.

F44: TWINNING=YES IS NOT ALLOWED FOR STATIONS WHICH ARE CIRCUIT DESK PHONES.

Advisory Messages

H01: THE STATION @@@@@@@@@@@@ IS NOW ASSIGNED AS A KEYSET.

H02: THE STATION @@@@@@@@@@@@ IS RELEASED FOR CALL PROCESSING.

H03: THE STATION @@@@@@@@@@@@ IS NOT ACTIVATED.

H04: THE STATION @@@@@@@@@@@@ IS NOT ACTIVATED (SIGNED OFF KEYSET).

H05: THE STATION @@@@@@@@@@@@ IS NO LONGER ASSIGNED AS A KEYSET.

H06: *** PLEASE NOTE : ***************************************************
     FOR STNO @@@@@@@@@@@@ ALL LINE KEYS WITH @@@@@@@@ >= @@@
     CAN NEVER BE USED, BECAUSE ADD-ON UNITS 3 AND 4
     ARE NOT SUPPORTED FOR AN OPTIPOINT DEVICE
     ( DISP-KCSU:@@@@@@@@@@@@,PRIM; )
**************************************************************************

H07: DSSLINE NOT EFFECTIVE BECAUSE NECESSARY PATCHES ARE NOT ACTIVATED.

H08: FOR DSSLINE=YES THE ATTRIBUTE DSSLINE HAS TO BE SET FOR 
     STNOSEC @@@@@@@@@@@@
     ( CHANGE-SDAT:STNO=@@@@@@@@@@@@,TYPE=ATTRIBUT,AATTR=DSSLINE; )

H09: ALTHOUGH SLKTYPE=SLKNAME IS SET, THE STATION NUMBER WILL BE DISPLAYED
     ON THE LABEL INSTEAD AS LONG AS THE RESPECTIVE PERSI NAME ENTRY IS
     NOT WELL DEFINED (E.G. NAME ENTRY DOES NOT EXIST YET/ANYMORE,
     NON-LATIN CHARACTER CONVERSION USED, ETC.).

H10: NO TERMINAL PLUGGED (YET) WITH SELF-LABELLING KEYS SUPPORT.

H11: THE FEATURE SELF LABELING KEY IS NOT SUPPORTED ON ADD-ON UNITS 3 AND 4.

H12: WHEN <linetone> = NO, THE PARAMETER <ringvol> AND <ringtype> ARE 
     IGNORED AND VALUES FROM PARAMETER RINGVOL AND RINGSOUN CONFIGURED
     WITH AMO-ACTDA ARE TAKEN.).

H13: CHANGE OF KEY 17 AND 18 ONLY TAKES PLACE IF PLUGGED ADD-ON IS
     LOW-COST ADD-ON.

H14: **** PLEASE NOTE : **************************************************
     A SECONDARY LINE SHOULD NOT BE CONFIGURED FOR HFA-WLAN DEVICES
     WHEN TWINNING = YES.
*************************************************************************

H15: AS SUBSCRIBER IS SLAVE MEMBER OF A PDG, PARAMETER ORLNPF IS SET TO 'LAST'.