SDAT - Administration of individual subscriber attributes and General Subscriber Data

The AMO SDAT can be used to administer subscriber-related attributes and features for the voice service.
It can process subscribers who have been added with the AMO SCSU, SBCSU, or SBCSU.
It can also be used to administer general data that is independent of any particular device.

ZIEL/DSS entries are updated when station number is changed (parameter NEWNO).
Example: Station X is configured as DSS destination for station A
- If station A's number is changed, then the ZIEL/DSS entry is updated with new number of A and X stays as DSS destination.
- If station X's number is changed, then the ZIEL/DSS entry is updated for station A with new number of X as DSS destination.

Cross Reference to Other AMOs:

AMO HOTLN	:	Hotline/Offhook intercept
AMO KCSU	:	Keysystem configuration in switching unit
AMO KNDEF	:	Virtual nodes
AMO SBCSU	:	Digital subscriber
AMO SCSU	:	Analog subscriber
AMO SSCSU	:	Special subscriber
AMO VADSU	:	Administer NMC alarms in the SWU
AMO WABE	:	Dialing Plans, Feature Access Codes
AMO BWLST	:	Configuration of lists of 'locked=black' or 'unlocked=white' numbers

Destination Processor: BP (Switching Unit)

Functions

DIALOG01	(internal)password class 5
CHANGE	password class 2
DELETE	password class 2
DISPLAY	password class 0
REGENERATE	password class 2

Procedure Overview

DIALOG01-SDAT

DIALOG01-SDAT

AMONOUN=<param>, DIMSU=<param>, PARAMS=<param>;

These action is only used for AMO internal proceedings and will not appear at the user interface.

CHANGE-SDAT

CHANGE-SDAT	STNO=<number>,
		TYPE=ATTRIBUT, {(min 1) AATTR=<param>, DATTR=<param>}, [OFFTYPE=<param>];
		TYPE=DATA, {(min 1) NEWNO=<number>, COS1=<number>, COS2=<number>, LCOSV1=<number>, LCOSV2=<number>, LCOSD1=<number>, LCOSD2=<number>, DPLN=<number>, ITR=<number>, SSTNO=<param>, COSX=<number>, SPDI=<number>, SPDC1=<key-num>, SPDC2=<key-num>, TRACE=<param>, ALARMNO=<number>, RCBKB=<param>, RCBKNA=<param>};
		TYPE=DATA1, {(min 1) NNO=<number>, CDRACC=<number>, PUBNUM=<number>, TON=<param>, NPI=<param>, SRCGRP=<number>, CLASSMRK=<param>, TCLASS=<number>, HOTIDX=<number>, STNOOOS=<key-num>, STNOAPE=<key-num>, MVHFAIP=<param>, AMOALTRT=<param>, SVCDOM=<number>, DELSVCDM=<param>, PRECLEVL=<param>, CLUSTID=<number>, BWLIDX=<number>, CLASSSEC=<param>, SECONLY=<param>, PUBNAME=<string>};

When attributes are changed (added / removed), compatibility checks are carried out to test the following:

whether the attributes entered - or those already existing - are compatible with each other,
whether the attributes entered are compatible with the type of equipment belonging to the subscriber,
whether the attributes entered are compatible with special subscriber data

When attributes are added for ACD SUPERVISOR a check is carried out to establish whether there are sufficient purchased subscribers of this type.

When an ACD attribute is removed, a check is carried out to establish whether there are still ACD group relationships.

The attribute DSSWOOVR overrules AMO-ZIELN and AMO-ZIEL configuration so that when the attribute is set,DSS and DSSWOOVR keys will use the DSSWOOVR functionality.

Compatibility between the Attributes

AUTOLOG can only be set in combination with AGENT.
DNDSR can only be set in combination with AGENT or SUPER.
HOT cannot be set with AGENT, SUPER, CASTMON, DNDSR, or OFHKRC.
KN and KNOVR cannot be set at the same time.
LNGDYN and LNGSTAT cannot be set at the same time.
TEAMSECR and TEAMEXEC cannot be set at the same time.
ROUTINE, PRTY, IMMED, FLASH and/or FLASHOV can not be set at the same time.
PARARNGM and PARARNGS cannot be set at the same time.
PARARNGM and SUPER cannot be set at the same time.
PARARNGM and AGENT cannot be set at the same time.
PARARNGS and SUPER cannot be set at the same time.
PARARNGS and AGENT cannot be set at the same time.

Compatibility of Attributes with Equipment

	AGENT AUTOLOG KRELOC ALOGNTW	SUPER	DNDSR	CAF	CASTMON CBSTMON	HOT KN KNOVR RKNOVR EOVR VC OFHKRC	ANI 1..10	LNGSTAT LNGDYN LOADF LOSC LOENB TEAMSECR TEAMEXEC DROHNEDU	SPKRCALL BROADCAST	DSSDEST DSFWDEXT NOSPKFWD PARARNGM PARARNGS CFNR ROUTINE PRTY FLASH FLASHOV PROT MLPPS
Anate	X	-	X	-	X	X	X	-	X	X
external DTE	-	-	-	-	-	-	-	-	-	X
Optiset Optipoint 500	X	X	X	X	X	X	X	X	X	X
Set600 FPP S0 / S2	-	-	-	-	-	X	X	-	-	X
CMI-BASE CMI-Extline CMI-ADM	-	-	-	-	-	-	-	-	-	X
CMI-Radio	X	X	X	X	X	X	X	-	-	X
Sky-Manager Sky-Extline	-	-	-	-	-	-	X	-	-	X
Sky-Phone	-	-	-	-	-	X	X	-	-	X
Sky-Line	X	X	X	X	X	X	X	-	-	X
TC-Logopti	-	-	-	-	-	X	X	-	-	X
TCVLV	-	-	-	-	-	-	X	-	-	X

Compatibility of Attributes with Special Subscriber

	AGENT AUTOLOG	SUPER	DNDSR	CAF	CASTMON	CBSTMON
Station signed off)	X	X	X	X	X	X
Floating station)	-	-	-	-	-	-
Station with assosiated DCI	X	X	X	X	X	X
CHESE executive	-	X	X	X	X	X
CHESE secretary	-	-	-	-	-	-
CHESE representative	X	X	X	X	X	X

Attributes which were not mentioned are possible for all special subscribers described above.

Note: Agent should not be set for SBCSU subscribers with SECR=YES.

Changing General Subscriber Data (Branch DATA)

In this branch, it is possible to change general subscriber data that is independent of any device. This data consists of parameters that are processed in the AMO SBCSU and in the AMO SCSU and SSCSU.
The checks correspond to the checks in the AMO with which the subscriber being changed was added.

Changing Subscriber Data (Branch DATA1)

In this branch, it is possible to change additional subscriber data. This data consists of parameters that are processed with AMO SDAT only. AMO SBCSU, SCSU and SSCSU can not process this data.

NNO

Only vitual nodes which are marked as subscriber (TYPE=OWN, see AMO KNDEF) will be administered. It is only possible to change one node id to another. If no default node id is configured by AMO SCSU, SBCSU or SSCSU AMO SDAT can not assigned another node id.

The virtual node id can contain max. 3 levels

Form: <level2>-<level1>-<level0> (e.g. 1-2-3 or 3-15 or 222)

Levels have to be filled from low to high (e.g not allowed 1-0-12 or 1-0-0)

Possible Values: level2: 0-29, level1: 0-253, level 0: 1-999

CDRACC

The Account Code (ACC) is used to bill call cost and time to individual customers or projects. CDR Account Code is a new feature and will not affect the existing Project Code (PCODE) feature. When a CDR Account Code is configured as default (automatic) Account Code for a device by AMO SDAT, this Account Code is assigned to all internal, outgoing or incoming calls of this station.

A static assignement of an account code to all station numbers is possible, except all "functional devices" (including ANATE behind OPTISET) and Teleworking devices (AMO SSCSU).

PUBNUM, TON, NPI

Administration of a public telephone number for subscriber devices can be done by AMO SDAT. This public telephone number is used in conjunction with calls placed to the public network via PRI trunks. The public telephone number has to be used whenever a number related to a given local subscriber device must be signalled to the public network via PRI.

Explizites Format
NPI=ISDN(E164)	NPI=PNP(private)

Implizites Format

NPI=UNKNOWN

TON=INTERNAT
(international number)

TON=L2REGIO
(level 2 regional number)

TON=UNKNOWN

TON=NATIONAL
(national number)

TON=L1REGIO
(level 1 regional number)

TON=SUBSCR
(subscriber number)

TON=LOKAL
(local number)

TON=UNKNOWN
(unknown)

TON=UNKNOWN
(unkown)

TON=ABBR
(abbreviated number)

If PUBNUM shoud be configured and no values for TON and/or NPI are entered and no valid value for TON and/or NPI is configured, the default value UNKNOWN will be assigned for TON and/or NPI.

SRCGRP/CLASSMRK

The source group of a subscriber is always initialized with default value zero. Via this default value the subscriber belongs to the source group of the LTU shelf where it is configured. AMO SDAT can configure the subscriber also in an other source group.

The classmarks of a subscriber are initialized with default value G711, EC and G729AOPT. With CLASSMRK=INIT the classmarks are reset to this initial values. If classmark NONE or INIT is specified no other values are allowed in combination with.

SRCGRP/TCLASS

The parameter TCLASS makes only sense for subscribers on DB_LN_AM_HG3530 and therefore this parameter is ignored for other devices.

HOTIDX

AM administrates a table with up to 20000 destinations for Hotline / Off Hook. This will be done by AMO-HOTLN.

Each station with Hotline / Off Hook classmark has to get a Hotline index. This will be administered per STNO with AMO SDAT. AMO SDAT checks neither that every station with HOT or OFHKRC classmark has a Hotline Index because AMO COSSU administrates HOT and OFHKRC, too, nor the entered Hotline Index leads to a valid entry from AMO HOTLN.

Example:

Input:

 CHANGE-SDAT:STNO=2100,TYPE=ATTRIBUT,AMERK=AGENT&AUTOLOG;

Output:

 H02: 2100   SCSU-STATION DATA CHANGED
 AMO-SDAT -208       ADMINISTRATION OF SUBSCRIBER ATTRIBUTES AND DATA

DELETE-SDAT

DELETE-SDAT	STNO=<number>,
		TYPE=CDRACC;
		TYPE=PUBNUM;
		TYPE=HOTIDX;
		TYPE=ALTROUTE,[PARAM=<param>];
		TYPE=BWLIDX;
		TYPE=PUBNAME;

The action DELETE-SDAT can be used to delete specific subscriber attributes which were configured with CHANGE-SDAT, TYPE=DATA1.

PUBNUM

When deleting PUBNUM the parameters TON and NPI are deleted, too.

DISPLAY-SDAT

DISPLAY-SDAT	[STNO=<number>],
		[TYPE=SUBDATA];
		[TYPE=SUBFIND],ATTRIB=<param>;
		[TYPE=SUBOV];
		[TYPE=NNOFIND],NNO=<number>;
		[TYPE=SRCFIND],SRCGRP=<number>;
		[TYPE=CLUSFIND],CLUSTID=<number>;

The action DISPLAY-SDAT results in the following:

1)	In the branch SUBDATA The general subscriber data and the subscriber-related attributes / features of a subscriber are output in tabular form. Associated device list is output if the device is primary or secondary associated device.
2)	In the branch SUBFIND subscribers with a particular subscriber-related attribute / feature are output in tabular form.
3)	In the branch SUBOV the assigned device and the AMO used to add the subscriber are output in tabular form for the subscribers entered.
4)	In the branch NNOFIND subscribers with a particular NNO are output in tabular form.

Example 1

Input:

  DISP-SDAT:2100,SUBDATA;

Output:

  --------------------------- SUBSCRIBERDATA ----------------------------   
  STNO    = 2100           COS1   = 22      DPLN  = 0       SSTNO   = NO    
  PEN     :  1- 1- 25-  0  COS2   = 1       ITR   = 7       TRACE   = NO    
  DVCFIG  : ANATE          LCOSV1 = 1       COSX  = 0       ALARMNO = 0     
  AMO     : SCSU           LCOSV2 = 1       SPDI  = 10      RCBKB   = NO    
  KEYSYS:                  LCOSD1 = 1       SPDC1 = 0       RCBKNA  = NO    
                           LCOSD2 = 1       SPDC2 = 1                       
  -----------------------------------------------------------------------   
  CDRACC   =                                                                
  SRCGRP = (1)             CLASSMRK =                                       
  PUBNUM =                 TON      =       NPI =                           
  KNNR   =  1-1-15         HOTIDX   =                                       
  -------------------------- ATTRIBUTES ---------------------------------   
  AGENT AUTOLOG NORELOC                                                     
  ------------------------ ASSOCIATED DEVICE LIST ------------------------  
  DESK       = 2111                                                         
  CLIENT     = 2674         (UNIPHONE)                                      
  ADDITIONAL = 2100         , 2112                                          
  ------------------------------------------------------------------------  
  AMO-SDAT -208       ADMINISTRATION OF SUBSCRIBER ATTRUBIUTES AND DATA

Example 2

Input:

  DISP-SDAT:2100,SUBFIND,AGENT;

Output:

  -------------------------------------------  
  STNO    DVCFIG    AMO    CDRACC        NNO   
  -------------------------------------------  
  2100    ANATE     SCSU              1-1-15   
  AMO-SDAT -208       ADMINISTRATION OF SUBSCRIBER ATTRUBIUTES AND DATA

Example 3

Input:

  DISP-SDAT:2100,SUBOV;

Output:

  --------------------------------------------- 
  STNO    DVCFIG    AMO    CDRACC        NNO    
  --------------------------------------------- 
  2100    ANATE     SCSU               1-1-15   
  2101    ANATE     SCSU               1-1-15   
  2102    ANATE     SCSU               1-1-15   
  2103    ANATE     SCSU               1-1-15   
  2104    ANATE     SCSU               1-1-15   
  2105    ANATE     SCSU               1-1-15   
  2106    ANATE     SCSU               1-1-15   
  AMO-SDAT -208       ADMINISTRATION OF SUBSCRIBER ATTRUBIUTES AND DATA

REGENERATE-SDAT

REGENERATE-SDAT	[STNO=<number>],
		[TYPE=ATTRIBUT],[ATTRIB=<param>];
		[TYPE=DATA1];

The action REGENERATE-SDAT can be used to restrict the output to subscribers with particular subscriber-related attributes / features

Example:

Input:

  REGEN-SDAT:2190;

Output:

  CHANGE-SDAT:2190,AGENT&AUTOLOG&KN&VC;

Parameter description

AATTR	add subscriber attribute
	Type of Input:	0 to 10 single values, concatenated with &, 1. parameter of a min-1-group
	Possible Values:	ACLIGHT	Device acts as Attendant with call queuing and speed extending.	DB_LINE_M_AC_LIGHT
		AGENT	ACD Agent	DB_LINE_M_ACD_AGENT
		ALOGONTW	auto sign-on after signed-off (teleworking)	DB_LINE_M_AUTO_LOGON_TW
		ANATECW	Anate Call Waiting	DB_LINE_M_ANATE_CALL_WAIT
		ANI1	automatic number identification category 1	DB_LINE_M_ANI_1
		ANI10	automatic number identification category 10	DB_LINE_M_ANI_10
		ANI2	automatic number identification category 2	DB_LINE_M_ANI_2
		ANI3	automatic number identification category 3	DB_LINE_M_ANI_3
		ANI4	automatic number identification category 4	DB_LINE_M_ANI_4
		ANI5	automatic number identification category 5	DB_LINE_M_ANI_5
		ANI6	automatic number identification category 6	DB_LINE_M_ANI_6
		ANI7	automatic number identification category 7	DB_LINE_M_ANI_7
		ANI8	automatic number identification category 8	DB_LINE_M_ANI_8
		ANI9	automatic number identification category 9	DB_LINE_M_ANI_9
		AUTOLOG	automatic logon of an ACD agent	DB_LINE_M_ACD_AUTO_LOGON
		BROADCST	speaker call - one way broadcast	DB_LINE_M_SPKR_CALL_BCAST
		CAF	control of ACD agent features	DB_LINE_M_CAF
		CALLDIR	Call Director	DB_LINE_M_CALL_DIRECTOR
		CALLTYPE	Call type for CMI	DB_LINE_M_DIF_CALL_TYPE
		CASTMON	can activate silent or tone monitoring	DB_LINE_M_CAN_ACT_SIL_MON
		CBSTMON	can be silent or tone monitored	DB_LINE_M_CAN_BE_SIL_MON
		CCW	Cancel Call Waiting access code	DB_LINE_M_CANCEL_CW
		CFNR	no call forwarding for acd-calls	DB_LINE_M_ACD_CFNR
		CFWDISPF	For a SIP with CFW display first redirecting nr.	DB_LINE_M_CFWDISPF
		COMSPK	com group speaker call - two way	DB_LINE_M_INTERCOM_CALL
		CONTRANS	Consultative transfer	DB_LINE_M_CONSULT_TRANSFER
		DISPATCH	Dispatcher device is connected on this line	DB_LINE_M_MULTIPLE_SIPHOLD
		DISPCHES	It is not used at the moment	DB_LINE_M_CALLOG_CHESE_DIS
		DISPFWD	CALLOG: Display already forwarded calls	DB_LINE_M_CALLOG_FWD_DISP
		DISPPUP	CALLOG: Do not display already picked up calls. It works for originally called party, GRPCAL and networkwide pick-up groups are not considered	DB_LINE_M_CALLOG_PUP_DISP
		DISSPKMC	If the parameter DISSPKMC is set, the speaker and the microphone of OptiPoint device is deactivated.	DB_LINE_M_DIS_SPK_MIC
		DMCALLWD	DMC allowed	DB_LINE_M_DMC_ALLOWED
		DMCSEC	Only Secure DMC-connection allowed	DB_LINE_M_DMC_SECURE
		DNDSR	do not disturb by splash ringing on AGENT or SUPER	DB_LINE_M_ACD_DND_SPLASH
		DSFWDEXT	display suppression for call forwarding to extern	DB_LINE_M_DISP_SUP_CFW_EXT
		DSSDEST	netwide dss-destination	DB_LINE_M_NW_DSS_DEST
		DSSLINE	dss line	DB_LINE_M_DSS_PHANTOM_LINE
		DSSSIGN	Dss Sign	DB_LINE_M_DSS_SIG_OVERRIDE
		DSSWOOVR	dss call without feature override	DB_LINE_M_DSS_WO_FEAT_OVER
		E164SIGL	E164 number signaling for UFIP station	DB_LINE_M_E164SIGL
		EMERGPLN	Emergency call pool number	DB_LINE_M_EMRGCY_POOL_SUB
		EOVR	emergency override/forced hold	DB_LINE_M_COMF_NATR
		ETD	elapsed time display	DB_LINE_M_ELAPSED_TIME
		FAXNOT38	Fax no T38	DB_LINE_M_FAX_NO_T38
		HOT	hotline Note: If HOT should be switched via cos changeover by code the authorisation must be set with AMO COSSU	DB_LINE_M_COMF_HOT
		KN	knocking/call waiting	DB_LINE_M_COMF_AKL
		KNOVR	knocking override	DB_LINE_M_COMF_AUFS
		LNGDYN	dynamic language select on the optiset The user is authorized to select the language for the user interface his or herself. The language is reset to the preferred language when the next transition into the idle state occurs.	DB_LINE_M_COMF_ML_1_CALL
		LNGSTAT	static language select on the optiset The user is authorized to select the language for the user interface his or herself. The selection made is statically stored as the preferred language.	DB_LINE_M_COMF_ML_STATIC
		LOADF	lock of all automatic dialing functions	DB_LINE_M_DATA_S_DIAL_FEA
		LOENB	lock of local memory function (enb)	DB_LINE_M_DATA_S_ENB
		LOG2PRIM	Store secondary line missed calls to primary	DB_LINE_M_KSEC_CALL_LOG
		LOSC	lock of all service and check functions	DB_LINE_M_DATA_S_CHECK
		MBCHL	Multiple Bchannel	DB_LINE_M_BCHL_MULTI_USE
		MBXDSPID	Mailbox display in idle state	DB_LINE_M_IDLE_MAILBOX
		MHFAHOME	HFA home phone of visitor	DB_LINE_M_HFA_MOB_HOME
		MHFATBV	mobile HFA phone which can be visited	DB_LINE_M_HFA_MOB_TBV
		MONSLNTL	silent monitoring/bridge of line	DB_LINE_M_LISTEN_WO_TONE
		NOCFWIGN	Control of Diversion (Ignore CFW) is not allowed	DB_LINE_M_NO_CFW_IGN
		NOCTC	No Cons/Transf/Conf menu option in talk state	DB_LINE_M_NO_CONS_TRS_CONF
		NOCTIMIC	CTI Control of Microphone not allowed.	DB_LINE_M_NO_CTI_MIC_CTR
		NODIV	No intercept to attendant console	DB_LINE_M_NO_DIV_ATND
		NOONHKTR	On hook transfer (transfer before answer) for consulting party not allowed	DB_LINE_M_ONHK_TRANS_ALLWD
		NORELOC	no autoset relocate	DB_LINE_M_NO_AUTOSET
	NOSPKFWD	restrict forwarding of speaker calls	DB_LINE_M_FWD_NO_SPKR_CALL
	NOSUDIAL	no supported dialing mode	DB_LINE_M_S_EDITDIAL
	OFHKRC	off hook recall Note: If HOT should be switched via cos changeover by code the authorisation must be set with AMO COSSU.	DB_LINE_M_COMF_ROE
	OSDEVRDY	Out of service device(HFA & UFIP) is seen READY	DB_LINE_M_OOS_DEV_READY
	PARARNGM	master of a parallel ringing group	DB_LINE_M_PARALLEL_MASTER
	PARARNGS	subscriber of a parallel ringing group	DB_LINE_M_PARALLEL_PARAL
	RKNOVR	reject knocking/override	DB_LINE_M_COMF_AUFAKS
	RNGXFERL	ring transfer for line desired	DB_LINE_M_SWITCHD_ON_ICEPT
	SECLVDSP	Notification about call security at display	DB_LINE_M_SEC_LEVEL_DISP
	SECLVTON	seclvton	DB_LINE_M_SEC_LEVEL_NOTIFY
	SECRAGNT	Secret ACD agent number	DB_LINE_M_SECR_AGT_NUM
	SIPDTP	SIP Disconnect To Progress	DB_LINE_M_SIP_LISTEN_EXT_ANN
	SNRLINE	use redial number of used line	DB_LINE_M_REDIAL_PER_LINE
	SPKRCALL	speaker call - one way	DB_LINE_M_SPKR_CALL_1WAY
	SRING	Single Cadence Ring for imcoming calls	DB_LINE_M_SINGLE_RING
	STAOND	Static OND	DB_LINE_M_STATIC_OND
	SUPER	ACD Supervisor	DB_LINE_M_ACD_SUPERVISOR
	SUPREL	Suppress Release from UFIP	DB_LINE_M_SUPREL_TO_PARTNER
	TEAMEXEC	executive for netteam	DB_LINE_M_TEAM_CHIEF
	TEAMSECR	secretary for netteam	DB_LINE_M_TEAM_SECRETARY
	VC	voice call	DB_LINE_M_COMF_DIRANS
ALARMNO	alarm number of logical device class (has to be configured with AMO VADSU, ANTYPE=PERS) only valid for KEY300, OPTISET, BASIS, SET600, S0PP and S2PP
	Type of Input:	single value, 16. parameter of a min-1-group
	Possible Values:	numeric, 0, 8-583
AMOALTRT	amo alternate routing
	Type of Input:	single value, 13. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
AMONOUN
	Type of Input:	single value, mandatory
	Possible Values:	ACSU	acsu	DB_AMO_ACSU
		SBCSU	sbcsu	DB_AMO_SBCSU
		SCSU	scsu	DB_AMO_SCSU
		SSCSU	sscsu	DB_AMO_SSCSU
ATTRIB	individual subscriber attribute
	Type of Input:	0 to 10 single values, concatenated with &, mandatory			(DISPLAY,TYPE=SUBFIND-subscriber with defined attribut)
	Type of Input:	1 to 10 single values, concatenated with &, optional			(REGENERATE,TYPE=ATTRIBUT-individual subscriber attribute)
	Possible Values:	ACLIGHT	Device acts as Attendant with call queuing and speed extending.	DB_LINE_M_AC_LIGHT
		AGENT	ACD Agent	DB_LINE_M_ACD_AGENT
		ALOGONTW	auto sign-on after signed-off (teleworking)	DB_LINE_M_AUTO_LOGON_TW
		ANATECW	Anate Call Waiting	DB_LINE_M_ANATE_CALL_WAIT
		ANI1	automatic number identification category 1	DB_LINE_M_ANI_1
		ANI10	automatic number identification category 10	DB_LINE_M_ANI_10
		ANI2	automatic number identification category 2	DB_LINE_M_ANI_2
		ANI3	automatic number identification category 3	DB_LINE_M_ANI_3
		ANI4	automatic number identification category 4	DB_LINE_M_ANI_4
		ANI5	automatic number identification category 5	DB_LINE_M_ANI_5
		ANI6	automatic number identification category 6	DB_LINE_M_ANI_6
		ANI7	automatic number identification category 7	DB_LINE_M_ANI_7
		ANI8	automatic number identification category 8	DB_LINE_M_ANI_8
		ANI9	automatic number identification category 9	DB_LINE_M_ANI_9
		AUTOLOG	automatic logon of an ACD agent	DB_LINE_M_ACD_AUTO_LOGON
		BROADCST	speaker call - one way broadcast	DB_LINE_M_SPKR_CALL_BCAST
		CAF	control of ACD agent features	DB_LINE_M_CAF
		CALLDIR	Call Director	DB_LINE_M_CALL_DIRECTOR
		CALLTYPE	Call type for CMI	DB_LINE_M_DIF_CALL_TYPE
		CASTMON	can activate silent or tone monitoring	DB_LINE_M_CAN_ACT_SIL_MON
		CBSTMON	can be silent or tone monitored	DB_LINE_M_CAN_BE_SIL_MON
		CCW	Cancel Call Waiting access code	DB_LINE_M_CANCEL_CW
		CFNR	no call forwarding for acd-calls	DB_LINE_M_ACD_CFNR
		CFWDISPF	For a SIP with CFW display first redirecting nr.	DB_LINE_M_CFWDISPF
		COMSPK	com group speaker call - two way	DB_LINE_M_INTERCOM_CALL
		CONTRANS	Consultative transfer	DB_LINE_M_CONSULT_TRANSFER
		DESK	UFIP Desk Station	DB_LINE_M_CLIENT_ONS
		DISPATCH	Dispatcher device is connected on this line	DB_LINE_M_MULTIPLE_SIPHOLD
		DISPCHES	It is not used at the moment	DB_LINE_M_CALLOG_CHESE_DIS
		DISPFWD	CALLOG: Display already forwarded calls	DB_LINE_M_CALLOG_FWD_DISP
		DISPPUP	CALLOG: Do not display already picked up calls. It works for originally called party, GRPCAL and networkwide pick-up groups are not considered	DB_LINE_M_CALLOG_PUP_DISP
		DISSPKMC	If the parameter DISSPKMC is set, the speaker and the microphone of OptiPoint device is deactivated.	DB_LINE_M_DIS_SPK_MIC
		DMCALLWD	DMC allowed	DB_LINE_M_DMC_ALLOWED
		DMCSEC	Only Secure DMC-connection allowed	DB_LINE_M_DMC_SECURE
		DNDSR	do not disturb by splash ringing on AGENT or SUPER	DB_LINE_M_ACD_DND_SPLASH
		DSFWDEXT	display suppression for call forwarding to extern	DB_LINE_M_DISP_SUP_CFW_EXT
		DSSDEST	netwide dss-destination	DB_LINE_M_NW_DSS_DEST
		DSSLINE	dss line	DB_LINE_M_DSS_PHANTOM_LINE
		DSSSIGN	Dss Sign	DB_LINE_M_DSS_SIG_OVERRIDE
		DSSWOOVR	dss call without feature override	DB_LINE_M_DSS_WO_FEAT_OVER
		E164SIGL	E164 number signaling for UFIP station	DB_LINE_M_E164SIGL
		EMERGPLN	Emergency call pool number	DB_LINE_M_EMRGCY_POOL_SUB
		EOVR	emergency override/forced hold	DB_LINE_M_COMF_NATR
		ETD	elapsed time display	DB_LINE_M_ELAPSED_TIME
		FAXNOT38	Fax no T38	DB_LINE_M_FAX_NO_T38
		HOT	hotline Note: If HOT should be switched via cos changeover by code the authorisation must be set with AMO COSSU	DB_LINE_M_COMF_HOT
		KN	knocking/call waiting	DB_LINE_M_COMF_AKL
		KNOVR	knocking override	DB_LINE_M_COMF_AUFS
		LNGDYN	dynamic language select on the optiset The user is authorized to select the language for the user interface his or herself. The language is reset to the preferred language when the next transition into the idle state occurs.	DB_LINE_M_COMF_ML_1_CALL
		LNGSTAT	static language select on the optiset The user is authorized to select the language for the user interface his or herself. The selection made is statically stored as the preferred language.	DB_LINE_M_COMF_ML_STATIC
		LOADF	lock of all automatic dialing functions	DB_LINE_M_DATA_S_DIAL_FEA
		LOENB	lock of local memory function (enb)	DB_LINE_M_DATA_S_ENB
		LOG2PRIM	Store secondary line missed calls to primary	DB_LINE_M_KSEC_CALL_LOG
		LOSC	lock of all service and check functions	DB_LINE_M_DATA_S_CHECK
		MBCHL	Multiple Bchannel	DB_LINE_M_BCHL_MULTI_USE
		MBXDSPID	Mailbox display in idle state	DB_LINE_M_IDLE_MAILBOX
		MHFAHOME	HFA home phone of visitor	DB_LINE_M_HFA_MOB_HOME
		MHFATBV	mobile HFA phone which can be visited	DB_LINE_M_HFA_MOB_TBV
		MONSLNTL	silent monitoring/bridge of line	DB_LINE_M_LISTEN_WO_TONE
		NOCFWIGN	Control of Diversion (Ignore CFW) is not allowed	DB_LINE_M_NO_CFW_IGN
		NOCTC	No Cons/Transf/Conf menu option in talk state	DB_LINE_M_NO_CONS_TRS_CONF
		NOCTIMIC	CTI Control of Microphone not allowed.	DB_LINE_M_NO_CTI_MIC_CTR
		NODIV	No intercept to attendant console	DB_LINE_M_NO_DIV_ATND
		NOONHKTR	On hook transfer (transfer before answer) for consulting party not allowed	DB_LINE_M_ONHK_TRANS_ALLWD
	NORELOC	no autoset relocate	DB_LINE_M_NO_AUTOSET
	NOSPKFWD	restrict forwarding of speaker calls	DB_LINE_M_FWD_NO_SPKR_CALL
	NOSUDIAL	no supported dialing mode	DB_LINE_M_S_EDITDIAL
	OFHKRC	off hook recall Note: If HOT should be switched via cos changeover by code the authorisation must be set with AMO COSSU.	DB_LINE_M_COMF_ROE
	OSDEVRDY	Out of service device(HFA & UFIP) is seen READY	DB_LINE_M_OOS_DEV_READY
	OSMO	UFIP is to become OSMO Client	DB_LINE_M_OSMO_CLIENT
	OTHER	UFIP Client Station	DB_LINE_M_CLIENT_OND
	PARARNGM	master of a parallel ringing group	DB_LINE_M_PARALLEL_MASTER
	PARARNGS	subscriber of a parallel ringing group	DB_LINE_M_PARALLEL_PARAL
	RKNOVR	reject knocking/override	DB_LINE_M_COMF_AUFAKS
	RNGXFERL	ring transfer for line desired	DB_LINE_M_SWITCHD_ON_ICEPT
	SECLVDSP	Notification about call security at display	DB_LINE_M_SEC_LEVEL_DISP
	SECLVTON	seclvton	DB_LINE_M_SEC_LEVEL_NOTIFY
	SECRAGNT	Secret ACD agent number	DB_LINE_M_SECR_AGT_NUM
	SIPDTP	SIP Disconnect To Progress	DB_LINE_M_SIP_LISTEN_EXT_ANN
	SNRLINE	use redial number of used line	DB_LINE_M_REDIAL_PER_LINE
	SPKRCALL	speaker call - one way	DB_LINE_M_SPKR_CALL_1WAY
	SRING	Single Cadence Ring for imcoming calls	DB_LINE_M_SINGLE_RING
	STAOND	Static OND	DB_LINE_M_STATIC_OND
	SUPER	ACD Supervisor	DB_LINE_M_ACD_SUPERVISOR
	SUPREL	Suppress Release from UFIP	DB_LINE_M_SUPREL_TO_PARTNER
	TEAMEXEC	executive for netteam	DB_LINE_M_TEAM_CHIEF
	TEAMSECR	secretary for netteam	DB_LINE_M_TEAM_SECRETARY
	UNIPHONE	UFIP is to become UnifyPhone Client	DB_LINE_M_UNIPHONE_CLIENT
	VC	voice call	DB_LINE_M_COMF_DIRANS
	ZOOMPSI	UFIP is to become ZOOMPSI Client	DB_LINE_M_ZOOMPSI_CLIENT
BWLIDX	Index for destination Numbers List
	Type of Input:	single value, 18. parameter of a min-1-group
	Possible Values:	numeric, 1-500
CDRACC	cdr account code
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, up to 12 characters
CLASSMRK	classmarks for ip-connections
	Type of Input:	0 to 6 single values, concatenated with &, 7. parameter of a min-1-group
	Possible Values:	EC	echo cancellation	MI_DNIL_CM_EC
		G711	no voice compression to G.711	MI_DNIL_CM_VC_G711
		G729A	voice compression (mandatory) according to G.729A	MI_DNIL_CM_VC_G729
		G729AOPT	voice compression (optional) according to G.729A	MI_DNIL_CM_VC_G729OPT
		INIT	initialisation of classmarks to default	MI_DNIL_CM_INIT
		NONE	deactivation of all classmarks	MI_DNIL_CM_NONE
		VAD	voice activity detection	MI_DNIL_CM_VAD
CLASSSEC	classsec
	Type of Input:	single value, 19. parameter of a min-1-group
	Possible Values:	CIPHER	cipher	DB_SPE_SEC_LEV_CIPHER
		SECURE	secure	DB_SPE_SEC_LEV_SECURE
		STANDARD	standard	DB_SPE_SEC_LEV_STANDARD
		TRADITIO	traditional	DB_SPE_SEC_LEV_TRADITIONAL
CLUSTID	Note, for TDM devices it is not permitted to configure a cluster number, this means the value for parameter CLUSTID must be "0" (zero). Required data like PEN or sector number will be detected automatically by the LEGK ressoure manager. Also the feature "Autoset relocate" for TDM devices will be ensured.
	Type of Input:	single value, 17. parameter of a min-1-group			(CHANGE,TYPE=DATA1-administrate general subscriber data)
	Type of Input:	single value, mandatory			(DISPLAY,TYPE=CLUSFIND-Find specified clustid)
	Possible Values:	numeric, 0-512			(CHANGE,TYPE=DATA1-administrate general subscriber data)
	Possible Values:	numeric, 0-99			(DISPLAY,TYPE=CLUSFIND-Find specified clustid)
COS1	class of service 1
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 1-1000
COS2	class of service 2
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	numeric, 1-1000
COSX	class of service switchover group
	Type of Input:	single value, 11. parameter of a min-1-group
	Possible Values:	numeric, 0-15
DATTR	delete subscriber attribute
	Type of Input:	0 to 10 single values, concatenated with &, 2. parameter of a min-1-group
	Possible Values:	ACLIGHT	Device acts as Attendant with call queuing and speed extending.	DB_LINE_M_AC_LIGHT
		AGENT	ACD Agent	DB_LINE_M_ACD_AGENT
		ALOGONTW	auto sign-on after signed-off (teleworking)	DB_LINE_M_AUTO_LOGON_TW
		ANATECW	Anate Call Waiting	DB_LINE_M_ANATE_CALL_WAIT
		ANI1	automatic number identification category 1	DB_LINE_M_ANI_1
		ANI10	automatic number identification category 10	DB_LINE_M_ANI_10
		ANI2	automatic number identification category 2	DB_LINE_M_ANI_2
		ANI3	automatic number identification category 3	DB_LINE_M_ANI_3
		ANI4	automatic number identification category 4	DB_LINE_M_ANI_4
		ANI5	automatic number identification category 5	DB_LINE_M_ANI_5
		ANI6	automatic number identification category 6	DB_LINE_M_ANI_6
		ANI7	automatic number identification category 7	DB_LINE_M_ANI_7
		ANI8	automatic number identification category 8	DB_LINE_M_ANI_8
		ANI9	automatic number identification category 9	DB_LINE_M_ANI_9
		AUTOLOG	automatic logon of an ACD agent	DB_LINE_M_ACD_AUTO_LOGON
		BROADCST	speaker call - one way broadcast	DB_LINE_M_SPKR_CALL_BCAST
		CAF	control of ACD agent features	DB_LINE_M_CAF
		CALLDIR	Call Director	DB_LINE_M_CALL_DIRECTOR
		CALLTYPE	Call type for CMI	DB_LINE_M_DIF_CALL_TYPE
		CASTMON	can activate silent or tone monitoring	DB_LINE_M_CAN_ACT_SIL_MON
		CBSTMON	can be silent or tone monitored	DB_LINE_M_CAN_BE_SIL_MON
		CCW	Cancel Call Waiting access code	DB_LINE_M_CANCEL_CW
		CFNR	no call forwarding for acd-calls	DB_LINE_M_ACD_CFNR
		CFWDISPF	For a SIP with CFW display first redirecting nr.	DB_LINE_M_CFWDISPF
		COMSPK	com group speaker call - two way	DB_LINE_M_INTERCOM_CALL
		CONTRANS	Consultative transfer	DB_LINE_M_CONSULT_TRANSFER
		DISPATCH	Dispatcher device is connected on this line	DB_LINE_M_MULTIPLE_SIPHOLD
		DISPCHES	It is not used at the moment	DB_LINE_M_CALLOG_CHESE_DIS
		DISPFWD	CALLOG: Display already forwarded calls	DB_LINE_M_CALLOG_FWD_DISP
		DISPPUP	CALLOG: Do not display already picked up calls. It works for originally called party, GRPCAL and networkwide pick-up groups are not considered	DB_LINE_M_CALLOG_PUP_DISP
		DISSPKMC	If the parameter DISSPKMC is set, the speaker and the microphone of OptiPoint device is deactivated.	DB_LINE_M_DIS_SPK_MIC
		DMCALLWD	DMC allowed	DB_LINE_M_DMC_ALLOWED
		DMCSEC	Only Secure DMC-connection allowed	DB_LINE_M_DMC_SECURE
		DNDSR	do not disturb by splash ringing on AGENT or SUPER	DB_LINE_M_ACD_DND_SPLASH
		DSFWDEXT	display suppression for call forwarding to extern	DB_LINE_M_DISP_SUP_CFW_EXT
		DSSDEST	netwide dss-destination	DB_LINE_M_NW_DSS_DEST
		DSSLINE	dss line	DB_LINE_M_DSS_PHANTOM_LINE
		DSSSIGN	Dss Sign	DB_LINE_M_DSS_SIG_OVERRIDE
		DSSWOOVR	dss call without feature override	DB_LINE_M_DSS_WO_FEAT_OVER
		E164SIGL	E164 number signaling for UFIP station	DB_LINE_M_E164SIGL
		EMERGPLN	Emergency call pool number	DB_LINE_M_EMRGCY_POOL_SUB
		EOVR	emergency override/forced hold	DB_LINE_M_COMF_NATR
		ETD	elapsed time display	DB_LINE_M_ELAPSED_TIME
		FAXNOT38	Fax no T38	DB_LINE_M_FAX_NO_T38
		HOT	hotline Note: If HOT should be switched via cos changeover by code the authorisation must be set with AMO COSSU	DB_LINE_M_COMF_HOT
		KN	knocking/call waiting	DB_LINE_M_COMF_AKL
		KNOVR	knocking override	DB_LINE_M_COMF_AUFS
		LNGDYN	dynamic language select on the optiset The user is authorized to select the language for the user interface his or herself. The language is reset to the preferred language when the next transition into the idle state occurs.	DB_LINE_M_COMF_ML_1_CALL
		LNGSTAT	static language select on the optiset The user is authorized to select the language for the user interface his or herself. The selection made is statically stored as the preferred language.	DB_LINE_M_COMF_ML_STATIC
		LOADF	lock of all automatic dialing functions	DB_LINE_M_DATA_S_DIAL_FEA
		LOENB	lock of local memory function (enb)	DB_LINE_M_DATA_S_ENB
		LOG2PRIM	Store secondary line missed calls to primary	DB_LINE_M_KSEC_CALL_LOG
		LOSC	lock of all service and check functions	DB_LINE_M_DATA_S_CHECK
		MBCHL	Multiple Bchannel	DB_LINE_M_BCHL_MULTI_USE
		MBXDSPID	Mailbox display in idle state	DB_LINE_M_IDLE_MAILBOX
		MHFAHOME	HFA home phone of visitor	DB_LINE_M_HFA_MOB_HOME
		MHFATBV	mobile HFA phone which can be visited	DB_LINE_M_HFA_MOB_TBV
		MONSLNTL	silent monitoring/bridge of line	DB_LINE_M_LISTEN_WO_TONE
		NOCFWIGN	Control of Diversion (Ignore CFW) is not allowed	DB_LINE_M_NO_CFW_IGN
		NOCTC	No Cons/Transf/Conf menu option in talk state	DB_LINE_M_NO_CONS_TRS_CONF
		NOCTIMIC	CTI Control of Microphone not allowed.	DB_LINE_M_NO_CTI_MIC_CTR
		NODIV	No intercept to attendant console	DB_LINE_M_NO_DIV_ATND
		NOONHKTR	On hook transfer (transfer before answer) for consulting party not allowed	DB_LINE_M_ONHK_TRANS_ALLWD
		NORELOC	no autoset relocate	DB_LINE_M_NO_AUTOSET
	NOSPKFWD	restrict forwarding of speaker calls	DB_LINE_M_FWD_NO_SPKR_CALL
	NOSUDIAL	no supported dialing mode	DB_LINE_M_S_EDITDIAL
	OFHKRC	off hook recall Note: If HOT should be switched via cos changeover by code the authorisation must be set with AMO COSSU.	DB_LINE_M_COMF_ROE
	OSDEVRDY	Out of service device(HFA & UFIP) is seen READY	DB_LINE_M_OOS_DEV_READY
	PARARNGM	master of a parallel ringing group	DB_LINE_M_PARALLEL_MASTER
	PARARNGS	subscriber of a parallel ringing group	DB_LINE_M_PARALLEL_PARAL
	RKNOVR	reject knocking/override	DB_LINE_M_COMF_AUFAKS
	RNGXFERL	ring transfer for line desired	DB_LINE_M_SWITCHD_ON_ICEPT
	SECLVDSP	Notification about call security at display	DB_LINE_M_SEC_LEVEL_DISP
	SECLVTON	seclvton	DB_LINE_M_SEC_LEVEL_NOTIFY
	SECRAGNT	Secret ACD agent number	DB_LINE_M_SECR_AGT_NUM
	SIPDTP	SIP Disconnect To Progress	DB_LINE_M_SIP_LISTEN_EXT_ANN
	SNRLINE	use redial number of used line	DB_LINE_M_REDIAL_PER_LINE
	SPKRCALL	speaker call - one way	DB_LINE_M_SPKR_CALL_1WAY
	SRING	Single Cadence Ring for imcoming calls	DB_LINE_M_SINGLE_RING
	STAOND	Static OND	DB_LINE_M_STATIC_OND
	SUPER	ACD Supervisor	DB_LINE_M_ACD_SUPERVISOR
	SUPREL	Suppress Release from UFIP	DB_LINE_M_SUPREL_TO_PARTNER
	TEAMEXEC	executive for netteam	DB_LINE_M_TEAM_CHIEF
	TEAMSECR	secretary for netteam	DB_LINE_M_TEAM_SECRETARY
	VC	voice call	DB_LINE_M_COMF_DIRANS
DELSVCDM	Delete MLPP Service Domain
	Type of Input:	single value, 15. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
DIMSU
	Type of Input:	single value, mandatory
	Possible Values:	ACDAG	maximal number of agents	MI_DIMSU_MAX_AGENT
		ACDPRIM	maximal number of agent prime lines	MI_DIMSU_MAX_PRIME_LINE
		ALTROUT	no. of alternate routing nos for subscr/acs	MI_DIMSU_ALTROUT
		BLK100	no. of dial plan 100-blocks	MI_DIMSU_BLK100
DPLN	feature access group, dial plan group
	Type of Input:	single value, 8. parameter of a min-1-group
	Possible Values:	numeric, 0-63
HOTIDX	hotline index
	Type of Input:	single value, 9. parameter of a min-1-group
	Possible Values:	numeric, 1-20000
ITR	internal traffic restriction group / closed user group
	Type of Input:	single value, 9. parameter of a min-1-group
	Possible Values:	numeric, 0-63
LCOSD1	lcr-class-of-service-1 (data)
	Type of Input:	single value, 6. parameter of a min-1-group
	Possible Values:	numeric, 1-1000
LCOSD2	lcr-class-of-service-2 (data)
	Type of Input:	single value, 7. parameter of a min-1-group
	Possible Values:	numeric, 1-1000
LCOSV1	lcr-class-of-service-1 (voice)
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	numeric, 1-1000
LCOSV2	lcr-class-of-service-2 (voice)
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	numeric, 1-1000
MVHFAIP	move hfa-ip-phone
	Type of Input:	single value, 12. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
NEWNO	new station number
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	numeric, up to 12 characters
NNO	virtual node number
	Type of Input:	0 to 3 single values, concatenated with -, 1. parameter of a min-1-group			(CHANGE,TYPE=DATA1-administrate general subscriber data)
	Type of Input:	0 to 3 single values, concatenated with -, mandatory			(DISPLAY,TYPE=NNOFIND-find specified nno)
	Possible Values:	numeric, 0-999
NPI	numbering plan identification
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	ISDN	isdn (e.164)	DB_NUM_P_ISDN_TELE
		PNP	private	DB_NUM_P_PRIVATE
		UNKNOWN	unknown	DB_NUM_P_UNKNOWN
OFFTYPE	type of deactivation for stno
	Type of Input:	single value, optional
	Possible Values:	DC	deactivate with camp-on
		DI	deactivate immediately
		NL	no locking
PARAM	paramters for alternate routing
	Type of Input:	0 to 4 single values, concatenated with &, optional
	Possible Values:	AMOALTRT	amo alternate routing
		MVHFAIP	move hfa-ip-phone
		STNOAPE	subscr ind. alternate routing no for ap emergency
		STNOOOS	subscr individual alternate routing number for OOS
PARAMS
	Type of Input:	single value, mandatory
	Possible Values:	ALARMNO	alarm number of logical device class	MI_M_PARAM_ALARMNR
		COS1	class of service 1	MI_M_PARAM_COS1
		COS2	class of service 2	MI_M_PARAM_COS2
		COSX	class of service switchover group	MI_M_PARAM_BUM
		DPLN	feature access group, dial plan group	MI_M_PARAM_WABE
		ITR	internal traffic restriction group	MI_M_PARAM_VBZ
		LCOSD1	lcr-class-of-service-1 (data)	MI_M_PARAM_LCOSD1
		LCOSD2	lcr-class-of-service-2 (data)	MI_M_PARAM_LCOSD2
		LCOSV1	lcr-class-of-service-1 (voice)	MI_M_PARAM_LCOSS1
		LCOSV2	lcr-class-of-service-2 (voice)	MI_M_PARAM_LCOSS2
		NEWNO	new station number	MI_M_PARAM_NEUNU
		RCBKB	reject call back on busy	MI_M_PARAM_RCBKB
		RCBKNA	reject call back on no answer	MI_M_PARAM_RRSF
		SPDC1	central speed calling list 1	MI_M_PARAM_RNGZ1
		SPDC2	central speed calling list 2	MI_M_PARAM_RNGZ2
		SPDI	station with speed calling individual	MI_M_PARAM_RNGI
		SSTNO	secret station number	MI_M_PARAM_GETLNNU
		TRACE	malicious call trace allowed	MI_M_PARAM_AMTFANG
PRECLEVL	MLPP Precedence Level
	Type of Input:	0 to 3 single values, concatenated with &, 16. parameter of a min-1-group
	Possible Values:	FLASH	mlpp-level flash	DB_MLPP_AUTH_FLASH
		FLASHOV	mlpp-level flash override (high level)	DB_MLPP_AUTH_FLASH_OVERR
		IMMED	mlpp-level immediate	DB_MLPP_AUTH_IMMED
		MLPPS	static protection against mlpp-calls	DB_MLPP_AUTH_S_PROTECT
		NONE	no precedence level	DB_MLPP_AUTH_RESERVE_7
		PROT	for dynamic outgoing call protection	DB_MLPP_AUTH_D_PROTECT
		PRTY	mlpp-level priority (low level)	DB_MLPP_AUTH_PRTY
		ROUTINE	mlpp-level routine	DB_MLPP_AUTH_ROUTINE
PUBNAME	public telephone name
	Type of Input:	single value, 21. parameter of a min-1-group
	Possible Values:	text, up to 22 characters
PUBNUM	public telephone number
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	numeric, up to 15 characters
RCBKB	reject call back on busy
	Type of Input:	single value, 17. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
RCBKNA	reject call back on no answer
	Type of Input:	single value, 18. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
SECONLY	seconly
	Type of Input:	single value, 20. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
SPDC1	central speed calling list 1
	Type of Input:	single value, 13. parameter of a min-1-group
	Possible Values:	0-9,*,#,A-D, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, #
SPDC2	central speed calling list 2
	Type of Input:	single value, 14. parameter of a min-1-group
	Possible Values:	0-9,*,#,A-D, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, #
SPDI	station with speed calling individual
	Type of Input:	single value, 12. parameter of a min-1-group
	Possible Values:	numeric, 0, 10, 20, 30
SRCGRP	source group index
	Type of Input:	single value, 6. parameter of a min-1-group			(CHANGE,TYPE=DATA1-administrate general subscriber data)
	Type of Input:	single value, mandatory			(DISPLAY,TYPE=SRCFIND-Find specified src group)
	Possible Values:	numeric, 0-255
SSTNO	secret station number
	Type of Input:	single value, 10. parameter of a min-1-group
	Possible Values:	NO	no
		ONLYEX0	display suppression for external stations
		ONLYEXT	replacement number for external stations
		YES	yes
STNO	station number
	Type of Input:	1 to 10 single values, concatenated with & or &&, mandatory			(CHANGE / DELETE)
	Type of Input:	1 to 10 single values, concatenated with & or &&, optional			(DISPLAY / REGENERATE)
	Possible Values:	numeric, up to 12 characters
STNOAPE	subscriber individual alternate routing no. for ap emergency
	Type of Input:	single value, 11. parameter of a min-1-group
	Possible Values:	0-9,*,#,A-D, up to 22 characters
STNOOOS	subscriber individual alternate routing number for OOS
	Type of Input:	single value, 10. parameter of a min-1-group
	Possible Values:	0-9,*,#,A-D, up to 22 characters
SVCDOM	MLPP Service Domain
	Type of Input:	5 single values, concatenated with -, 14. parameter of a min-1-group
	Possible Values:	numeric, 0-255
TCLASS	The parameter TCLASS assigns a time class to a HFA subscriber, which is needed to calculate the time which is shown on the device display.
	Type of Input:	single value, 8. parameter of a min-1-group
	Possible Values:	numeric, 0-50
TON	type of number
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	ABBR	abbreviated	DB_NUM_ABBREVIATED
		INTERNAT	international	DB_NUM_INTERNATIONAL
		L1REGIO	level 1 regional	DB_NUM_LEVEL_1_REGIONAL
		L2REGIO	level 2 regional	DB_NUM_LEVEL_2_REGIONAL
		LOCAL	local	DB_NUM_LOCAL
		NATIONAL	national	DB_NUM_NATIONAL
		SUBSCR	subscriber	DB_NUM_SUBSCRIBER
		UNKNOWN	unknown	DB_NUM_UNKNOWN
TRACE	malicious call trace allowed
	Type of Input:	single value, 15. parameter of a min-1-group
	Possible Values:	NO	no
	Possible Values:	YES	yes
TYPE	type of administration
	Type of Input:	single value, mandatory			(CHANGE / DELETE)
	Type of Input:	single value, optional			(DISPLAY / REGENERATE)
	Possible Values:	ALTROUTE	paramters for alternate routing on error		(DELETE)
		ATTRIBUT	administrate subscriber attributes (service=voice)		(CHANGE)
		ATTRIBUT	individual subscriber attribute		(REGENERATE)
		BWLIDX	Index for destination Numbers List		(DELETE)
		CDRACC	cdr account code		(DELETE)
		CLUSFIND	Find specified clustid		(DISPLAY)
		DATA	administrate general subscriber data		(CHANGE)
		DATA1	administrate general subscriber data		(CHANGE / REGENERATE)
		HOTIDX	hotline index		(DELETE)
		NNOFIND	find specified nno		(DISPLAY)
		PUBNAME	public telephone name		(DELETE)
		PUBNUM	public telephone number		(DELETE)
		SRCFIND	Find specified src group		(DISPLAY)
		SUBDATA	attributes and data		(DISPLAY)
		SUBFIND	subscriber with defined attribut		(DISPLAY)
		SUBOV	subscriber overview		(DISPLAY)

Error Messages

F01	F01: <STNO> THIS <new >STATION NUMBER <NEWNO> IS NOT ASSIGNED IN THE DIAL PLAN (DPLN).
F01	F01: <STNO> THIS <>STATION NUMBER IS NOT ASSIGNED IN THE DIAL PLAN (DPLN).
F02	F02: <STNO> THIS STATION IS NOT ASSIGNED.
F03	F03: <STNO> DATA OF STATION CAN NOT BE CHANGED RESP. DISPLAYED BECAUSE THE STATION IS NOT ASSIGNED BY AMO SCSU, SBCSU OR SSCSU.
F03	F03: <STNO> DATA OF STATION CAN NOT BE CHANGED RESP. DISPLAYED BECAUSE THE STATION IS ASSIGNED BY AMO <ACSU>.
F04	F04: <STNO> THE STATION IS CAMP-ON BLOCKED. REPEAT COMMAND LATER OR DEACTIVATE IMMEDIATELY (AMO DSSU)
F05	F05: <STNO> THE STATION MUST BE BLOCKED. OPTIONS: - REPEAT COMMAND WITH DEACTIVATION (OFFTYPE=DC/DI) - FIRST DEACTIVATE STATION BY: DEACT-DSSU:OFFTYPE=DC/DI,...; AND REPEAT COMMAND
F06	F06: <STNO> THE <new / >STATION NUMBER IS AN EXTERNAL STATION NUMBER.
F07	F07: THE STATION NUMBER RANGE <STNO-MIN> - <STNO-MAX> CONTAINS NO VALID STATION NUMBER.
F08	F08: <STNO> <attribute> IS NOT ALLOWED FOR <SCSU/SBCSU/SSCSU> DEVICE <gerkon>.
F09	F09: <DNDSR> CAN NOT BE ADDED BECAUSE AGENT AND SUPER WILL BE DELETED.
F09	F09: <attribute> CAN NOT BE <added/deleted> BECAUSE <attribute> WILL BE <added/deleted>.
F10	F10: <STNO> <attribute> CAN NOT BE <added/deleted> BECAUSE <attribute> IS <added/not added>.
F11	F11: <STNO> <attribute> IS NOT ALLOWED FOR <station>.
F12	F12: <STNO> <DNDSR> only can be <added> if <AGENT> or <SUPER> are <><added>.
F13	F13: <STNO> AGENT AND SUPER CAN NOT BE DELETED BECAUSE <DNDSR> IS ADDED.
F14	F14: <STNO> <SUPER/AGENT> can not be deleted because <DNDSR> is added and <AGENT/SUPER> is not added.
F15	F15: only one ANI-category is allowed.
F16	F16: <STNO> NO MORE <SUPER> CAN BE ADDED BECAUSE THE NUMBER OF ORDERED <ACD SUPERVISOR>S = @@@@@@@@ IS REACHED. PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES PLEASE CONTACT YOUR SERVICE CENTER IF YOU WISH TO ADD MORE <ACD SUPERVISOR>.
F18	F18: <STNO> SUPER can not be removed while the subscriber is a member of ACD GROUP @@@@@ (AMO ACDGP).
F19	F19: <STNO> <AUTOLOGON/AGENT/KRELOC> can not be removed while the subscriber is a member of ACD GROUP @@@@@ (AMO AGENT).
F20	F20: <attribute> AND <attribute> CAN NOT BE ADDED AT SAME TIME.
F21	F21: <STNO> the COS <1..1000> is not assigned.
F22	F22: <STNO> the new number is already assigned.
F23	F23: <STNO> insufficient memory space (AMO DIMSU: PARAMETER <ACDAG/ACDPRIM/BLK100>).
F24	F24: <STNO> no free SPDI memory.
F25	F25: <STNO> ALARMNO <0,8..583> is not yet assigned (AMO-VADSU).
F26	F26: <STNO> given attributes were already added/deleted at <SCSU/SBCSU/SSCSU>-station.
F27	F27: When entering station number ranges, the number of digits for each limit must be equal. The STNO range <STNO-MIN> - <STNO-MAX> cannot be processed.
F28	F28: <STNO> no parameters were submitted. The subscriber was not changed.
F29	F29: <STNO> cannot be changed to new number <NEWNO> if <CAF/AGENT/SUPER/TEAMSECR/TEAMEXEC> is added
F30	F30: <STNO> CANNOT BE CHANGE TO NEW STNO <NEWNO>. IT IS STILL REFERENCED BY ACD ROUTING TABLES. DELETE THE STATION FROM ACD ROUTING TABLE @@@@@ WITH AMO ACDRT BEFORE REPEATING THIS COMMAND
F31	F31: <STNO> AGENT cannot be added for keysystem change the outgoing line preference (ORLNPF) to LAST or PRIMEwith AMO KCSU before repeating this command
F32	F32: <STNO> MSN-number not deactivated for CP (order error)
F33	F33: <STNO> subscriber is already configured by AMO DNIT and cannot be changed
F34	F34: <STNO> netteam is not allowed by AMO ZAND
F35	F35: <STNO> <TEAMEXEC/TEAMSECR> can not be deleted for keysystem
H35	H35: <STNO> given attributes were already added/deleted at <SCSU/SBCSU/SSCSU>-station.
F36	F36: <STNO> <TEAMEXEC/TEAMSECR> can not be removed while the subscriber is a member. of ONS GROUP @@@@@@@@ (AMO AUN).
F38	F38: <STNO> no <NNO/CDRACC> can be assigned for configured device.
F40	F40: <STNO> invalid combination of NPI=<combinations> and TON=<combinations>.
F41	F41: INIT and/or NONE can only be set exclusively.
F42	F42: NNO Level<2/1/0> = <0-999> not allowed. Range <0/1> to <29/253/999>.
F44	F44: <STNO> NNO is not defined < with TYP=OWN> in virtual node table (AMO KNDEF)
F46	F46: <STNO> NPI and/or TON are possible only if a valid PUBNUM is configured
F47	F47: <STNO> the station cannot be processed because the required confirmation by call processing has not been received yet - repeat command later
F49	F49: ROUTINE, PRTY, IMMED, FLASH AND/OR FLASHOV can only be set exclusively.
F50	F50: <STNO> NORELOC can not be removed while the subscriber is logged on as AGENT.
F51	F51: THE BOARD WHICH SUBSCRIBER <STNO> IS ASSIGNED TO CANNOT BE CONFIGURED WITH MHFAHOME/MHFATBV/DMCALLOWED!
F52	F52: FOR STNO<OOS, resp. APE>=<STNOOOS> NO SUITABLE DPLN DAR IS CONFIGURED
F53	F53: <STNO> STNO<OOS, resp. APE> MUST NOT BE THE SAME AS STNO
F54	F54: <STNO> MVHFAIP=YES IS ONLY ALLOWED FOR OPTIIP
F55	F55: <STNO> the LCOS <1..1000> is not assigned.
F56	F56: STNOOOS/STNOAPE COULD NOT BE ADDED BECAUSE THERE IS NOT ENOUGH MEMORY INCREASE MEMORY VIA ADD-DIMSU:ALTROUT=<?>;
F57	F57: PARAMETER DSSDEST CAN NOT BE DELETED DUE TO UNDELETED ZIELN ENTRIES.
F58	F58: PARAMETER DSSWOOVR CAN NOT BE DELETED DUE TO UNDELETED ZIELN ENTRIES.
F59	F59: @@@@@@@@@@@@ DSSLINE CAN NOT BE DELETED BECAUSE DRPRIO(KCSU) IS SET TO NORMPRIO OR HIGHPRIO.
F60	F60: THE SPECIFIED TIME CLASS IS NOT CONFIGURED. SEE AMO-SIPCO.
F62	F62: THERE IS NO B/W LIST WITH INDEX @@@.
F63	F63: SIP SUBSCRIBER SECURITY LEVEL CAN NOT BE SET TO CIPHER OR TRADITIONAL.
F64	F64: COMSCENDO SECURITY LICENSE CHECK.
F65	F65: HFA SUBSCRIBER SECURITY LEVEL CAN NOT BE SET TO STANDARD OR TRADITIONAL.
F66	F66: TDM SUBSCRIBER SECURITY LEVEL CAN NOT BE SET TO STANDARD OR CIPHER.
F67	F67: Only signed off subscribers can be configured to the pool of Emergency Call numbers.
F68	F68: Only a maximum of 25 signed off subscribers can be configured to the pool of Emergency Call numbers.
F69	F69: CHANGE NOT PERFORMED. SUBSCRIBER IS MEMBER OF ONS GROUP @@@@. GROUP HAS TO BE DELETED FIRST.
F70	F70: CHANGE NOT PERFORMED. SUBSCRIBER @@@@@@@@@@@@ IS CONFIGURED AS KEYSET.
F71	F71: DPLN @@@ IS NOT ALLOWED FOR NODE @@@-@@@-@@@.
F72	F72: THE NODE @@@-@@@-@@@ IS NOT PROPERLY CONFIGURED.
F73	F73: SECONLY PARAMETER IS ALLOWED TO BE CHANGED FOR ONLY SIP SUBSCRIBERS IN SOFTGATE.
F74	F74: KEYSETS CANNOT BE CONFIGURED AS AN EMERGENCY NUMBER. (REG-KCSU:<STNO>,PRIM;)
F75	F75: <STNO> NNO ENTERED SHOULD BE DEFINED AS TYPE=OWN OR TYPE=KNOWNNET. (SEE AMO KNDEF)
F76	F76: SECLEVEL CIPHER IS NOT ALLOWED FOR UFIP SUBSCRIBER ON A CLASSICAL CGW.
F77	F77: STAOND flag cannot be added with SDAT, it can be set only by application via CSTA Set Forward Request.
F78	F78: AGENT CANNOT BE ADDED BECAUSE <STNO> IS CONFIGURED AS A CIRCUIT MEMBER.
F79	F79: <attribute> attribute cannot be deleted, because virtual agent is still logged on at station <STNO>
F80	F80: <STNO> <attribute> IS NOT ALLOWED FOR <SCSU/SBCSU/SSCSU> DEVICE <gerkon> virtual agent

Advisory Messages

	:******** PLEASE NOTE: ********************************************* H29: For the IP device the new STNO <NEWNO> must also be set! ************************************************************************
H01	H01: <STNO> parameter OFFTYPE is only needfull with DATTR=AGENT and will be ignored.
H02	H02: <STNO> <SBCSU/SCSU/SSCSU>-station data changed.
H03	H03: No station has been assigned.
H04	H04: A range input for the parameter STNO may not comprise more than <600> stations. The range has been truncated to <STNO-MIN> - <STNO-MAX> for processing.
H05	H05: No subscriber in the given range could be changed.
H08	H08: The STNO <STNO> has the new number <NEWNO>.
H09	H09: THIS DATA CHANGE WILL BE INITIATED AFTER DEACTIVATION AND RE-ACTIVATION OF THE SUBSCRIBER (RESTART-DSSU: TYPE=PEN OR TYPE=STNO) RESPECTIVELY
H10	H10: <STNO> download of NEWNO change to the modules will be initiated after deactivation and re-activation of the circuit ( RESTART-DSSU:TYPE=PEN,PEN1=<1>-<1-15,17-99>-@@@-@@@; )
H11	H11: <STNO> this station is configured in the executive telephone system <1-1000>. Please check the ITR of the executive system.
H13	H13: <STNO> ... still waiting for a confirmation by call processing (maximum <120> sec)
H14	H14: <STNO> for a HFA-IP station with MVHFAIP=YES a gateway-IP adress is required in case of OOS. Please configure it with ADD-APRT: TYPE=ALTERR, SRCGRP=<SOURCEGROUP>, ALRTYPE=OOS, GWIPADR=...;
H15	H15: <STNO> for a HFA-IP station with <MVHFAIP/AMOALTRT>=YES either a subscriber individual or a SRCGRP related STNO<OOS, resp. APE> is required in case of <OOS, resp. APE>. Please configure with CHANGE-SDAT: STNO=<STNO>, TYPE=DATA1, STNOO<OOS, resp. APE>=...; resp. ADD-APRT: TYPE=ALTERR, ALRTYPE=<OOS, resp. APE>, SRCGRP=@@@, ALTRTNR=...;
H16	H16: THIS DATA CHANGE WILL BE INITIATED AFTER DEACTIVATION AND RE-ACTIVATION OF THE CIRCUIT ( RESTART-DSSU:TYPE=PEN,PEN1=<1>-<1-15,17-99>-@@@-@@@; )
H30	H30: THE PARAMETER DELSVCDM OVERRULES THE PARAMETER SVCDOM THEREFORE THE SERVICE DOMAIN HAS BEEN DELETED
H31	H31: The parameter TCLASS is not supported for this subscriber and will be ignored.
H32	H32: The parameter DMCSEC is not configurable via AMO-SDAT anymore, the input will be ignored.The configuration of this parameter is done by DLS server only.
H33	H33: FOR SIP SUBSCRIBERS EXCEPT DISPATCHER DEVICES PARAMETER MBCHL (MULTIPLE BCHANNEL) MUST BE SET IN AMO-SDAT.
H34	H34: THE EXISTING DPLN OF THE STATION IS NOT IN ADPLN OF THE NEW NODE, SO IT IS INTERNALLY SET TO THE DPLN OF THE NEW NODE.
H35	H35: <STNO> given attributes were already added/deleted at <SCSU/SBCSU/SSCSU>-station.
H36	H36: ACLIGHT device has to be configured as Master in Master Hunt group for getting the queuing functionality.
H37	H37: SECLVTON: Warning tone will sound only if also SECLVDSP attribute is activated.
H38	H38: This device is used for CIRCUIT. Please initiate data change with restart of the CIRCUIT client. ( RESTART-DSSU:TYPE=STNO,STNO=<STNO>; )
H39	H39: New E164 numbering for CIRCUIT CLIENT due to node change. Corresponding CIRCUIT softclients require re-registration.
H40	H40: New E164 numbering for CIRCUIT DESK phone due to node change. Please update CIRCUIT settings accordingly.
H41	H41: New E164 numbering for <STNO> CIRCUIT CLIENT due to station change. Corresponding CIRCUIT softclients require re-registration.
H42	H42: New E164 numbering for CIRCUIT DESK phone due to station change. Please update CIRCUIT settings accordingly.
H43	H43: STAOND INPUT IGNORED, IT CAN BE SET ONLY VIA A CSTA APPLICATION SET FORWARD REQUEST.
H44	H44: ATTRIBUT SRING IS IGNORED FOR CMI DEVICES. ON CMI DEVICES THE USERS CAN SELECT BEEP IN PROFILE SILENT WHEN THEY WANT A SINGLE CADENCE RINGING.