200.2.1 ADD-TTBL

Enters tariffs into the tariff tables and tariff group tables.
For tariff tables with charge information, the limit for the last graduated area must be zero. The AMO queries the parameter pair limit and tariff as long as a limit of zero is entered (maximum 4 times). If no zero is entered, then the AMO sets zero for the fourth element automatically.
1.
Entering tariffs for connections with charge information
2.
Entering tariffs for connections without charge information
3.
Creating a tariff group table per Carrier and category of calling party and Service.
4.
Creating a table with clock information.
Notice
If one of the parameters FPLSDAY, FPLSN1..FPLSN4 in the table with clock information is set to either value K (Karlson random value), KA (Karlson Added random value) or KM (Karlson Modified random value), then the corresponding FIXDAY, FIXN1..FIXN4 is changed too according the following table. Additionally advisory message H11 is printed.
 
FPLSDAY, FPLSN1..N4
Corrected FIXDAY,FIXN1..N4
KA (Karlson Added)
1
KM (Karlson Modified)
1
K (Karlson)
0
Procedure overview
 
Command code
Parameter
 
ADD-TTBL
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
(1)
 
,|METHOD=FACTOR,FACTOR=<number>
 
 
,LT1=0,TAR1=<number>;
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=UNITS
 
 
,LT1=0,TAR1=<number>;
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=FACTOR,FACTOR=<number>
 
 
,LT1=</=0>,TAR1=<number>
 
 
,LT2=0,TAR2=<number>;
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=UNITS
 
 
,LT1=</=0>,TAR1=<number>
 
 
,LT2=0,TAR2=<number>;
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=FACTOR,FACTOR=<number>
 
 
,LT1=</=0>,TAR1=<number>
 
 
,LT2=</=0>,TAR2=<number>
 
 
,LT3=0,TAR3=<number>;
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=UNITS
 
 
,LT1=</=0>,TAR1=<number>
 
 
,LT2=</=0>,TAR2=<number>
 
 
,LT3=0,TAR3=<number>;
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=FACTOR,FACTOR=<number>
 
 
,LT1=</=0>,TAR1=<number>
 
 
,LT2=</=0>,TAR2=<number>
 
 
,LT3=</=0>,TAR3=<number>
 
 
,TAR4=<number>;
 
 
 
 
 
 
 
 
 
 
 
|TBL=WCU,TARTBLNO=<number>,TARMIN=<number>
 
 
,|METHOD=UNITS
 
 
,LT1=</=0>,TAR1=<number>
 
 
,LT2=</=0>,TAR2=<number>
 
 
,LT3=</=0>,TAR3=<number>
 
 
,TAR4=<number>;
 
 
 
 
 
|TBL=CLK,TARTBLNO=<number>,ZONE=<param>,
(2)
 
FIXDAY=<number>,FPLSDAY=<string>,PPLSDAY=<number>,
 
 
FIXN1=<number>,FPLSN1=<string>,PPLSN1=<number>,
 
 
FIXN2=<number>,FPLSN2=<string>,PPLSN2=<number>,
 
 
FIXN3=<number>,FPLSN3=<string>,PPLSN3=<number>,
 
 
FIXN4=<number>,FPLSN4=<string>,PPLSN4=<number>,
 
 
SEGTBLNO=<number>,CHPER=<param>;
 
 
 
 
 
|TBL=WOCU,TARTBLNO=<number>,ZONE=<string>
(3)
 
,INTDAY=<number>,TARDAY=<number>
 
 
,INTNT1=<number>,NTAR1=<number>
 
 
,INTNT2=<number>,NTAR2=<number>
 
 
,INTNT3=<number>,NTAR3=<number>
 
 
,INTNT4=<number>,NTAR4=<number>
 
 
,TARBAS=<number>,TARMIN=<number>
 
 
,SEGTBLNO=<number>,CHPER=<param>,[BCHLFACT=<number>];
 
 
 
 
 
|TBL=GRP,GROUPNO=<number>,CARRIER=<number>,
(4)
 
CATPTY=<param>,SERVICE=<param>,TARTBLNO=<number>;
 
Examples
1.
Creating a tariff without tariff ranges of 0,121 DM per call charge unit in the tariff table 1 with charge information, with minimum call charge of 5,01 DM, and with the cost calculalation charge unit. (The comma position per AMO-DAVF must be set on 2T or 3T. The setting in AMO-DAVF works only for the cost calculation on tariff tables with cost informations.)
Input:
ADD-TTBL:TBL=WCU,TARTBLNO=1,TARMIN=501,METHOD=UNITS,LT1=0,TAR1=121;
2.
Creating table 2 with charge information, with a minimum charge of 2,00 DM with a cost calculation method FACTOR (=1000%o) and with the following tariff ranges (The comma position in the AMO-DAVF is either -3 or -2, -1,0, +1, +2 or +3. The setting in the AMO-DAVF works only for the cost calculation on tariff tables with cost informations.):
value range 1: from 0 to 25 units, 0,6 DM per unit
value range 2: from 26 to 50 units, 0,5 DM per unit
value range 3: from 51 to 75 units, 0,4 DM per unit
value range 0: 76 to -- units, 0,2 DM per unit
Input:
ADD-TTBL:TBL=WCU,TARTBLNO=2,TARMIN=200,METHOD=FACTOR,FACTOR=1000, LT1=25,TAR1=60,LT2=50,TAR2=50,LT3=75,TAR3=40,TAR4=20;
3.
Adding table 1 (without charge information) with the following values:
Zone LOC
with TARBAS=+50 (0,50 DM) and TARMIN=75 (0,75 DM), SEGTBLNO=10, CHPER=Y, BCHLFACT= 100.
 
INTDAY
(in 1/100 Sec)
TARDAY
(in 1/1000
CU)
INTNT1
(in 1/100 Sec)
NTAR1
(in 1/1000
CU)
INTNT2
(in 1/100 Sec)
NTAR2
(in 1/1000
CU)
INTNT3
(in 1/100 Sec)
NTAR3
(in 1/1000
CU)
INTNT4
(in 1/100 Sec)
NTAR4
(in 1/1000
CU)
18000
209
24000
231
28000
232
36000
233
40000
234
The calculation should result in 1/1000th currency units.
Allocation of the comma position: either 2T or 3T
(The price per time clock is given in 1/1000th currency units.)
Note: Allocation of the comma position should only result via AMO-TTBL and not by AMO-DAVF.
Input:
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=1,COMPOS=2T; or
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=1,COMPOS=3T;
Creating of the tariff table.
Input:
ADD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=LOC,INTDAY=18000,TARDAY=209,INTNT1=24000,NTAR1=231,INTNT2=28000,NTAR2=232,INTNT3=36000,NTAR3=233,INTNT4=40000,NTAR4=234,TARBAS=+50,TARMIN=75,SEGTBLNO=10,CHPER=Y,BCHLFACT=100;
Zone DIST01
with TARBAS=+50 (0,50 DM) and TARMIN=75 (0,75 DM), SEGTBLNO=11, CHPER=N, BCHLFACT= 100.
 
INTDAY
(in 1/100 Sec)
TARDAY
(in 1/100
CU)
INTNT1
(in 1/100 Sec)
NTAR1
(in 1/100
CU)
INTNT2
(in 1/100 Sec)
NTAR2
(in 1/100
CU)
INTNT3
(in 1/100 Sec)
NTAR3
(in 1/100
CU)
INTNT4
(in 1/100 Sec)
NTAR4
(in 1/100
CU)
3000
25
3500
25
3800
25
4200
25
4800
25
The calculation should result in 1/100th currency units.
Allocation of the comma position: either -3, -2, -1,0, +1, +2 or +3
(The price per time clock is given in 1/100th currency units.)
Input:
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=1,COMPOS=+2;
Creating of the tariff table.
Input:
ADD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=DIST01,INTDAY=3000,TARDAY=25,INTNT1=3500,NTAR1=25,INTNT2=3800,NTAR2=25,INTNT3=4200,NTAR3=25,INTNT4=4800,NTAR4=25,TARBAS=+50,TARMIN=75,SEGTBLNO=11,CHPER=N,BCHLFACT=100;
Zone ABR01
with TARBAS=+100 (1,00DM) and TARMIN=150 (1,50 DM), SEGTBLNO=20, CHPER=Y, BCHLFACT=100
 
INTDAY
(in 1/100 Sec)
TARDAY
(in 1/1000
CU)
INTNT1
(in 1/100 Sec)
NTAR1
(in 1/1000
CU)
INTNT2
(in 1/100 Sec)
NTAR2
(in 1/1000
CU)
INTNT3
(in 1/100 Sec)
NTAR3
(in 1/1000
CU)
INTNT4
(in 1/100 Sec)
NTAR4
(in 1/1000
CU)
1500
28
1800
28
2100
28
2400
28
3000
28
The calculation should result in 1/100th currency units.
Allocation of the comma position: either -3, -2, -1,0, +1, +2 or +3
(The price per time clock is given in 1/100th currency units.)
Input:
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=1,COMPOS=+2;
Creating of the tariff table.
Input:
ADD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=ABR01,INTDAY=1500,TARDAY=28,INTNT1=1800,NTAR1=28,INTNT2=2100,NTAR2=28,INTNT3=2400,NTAR3=28,INTNT4=4800,NTAR4=28,TARBAS=+100,TARMIN=150,SEGTBLNO=20,CHPER=Y,BCHLFACT=100;
Zone ABR02
with TARBAS=-150 (1,50 DM) and TARMIN=200 (2,00 DM), SEGTBLNO=22, CHPER=Y, BCHLFACT= 100.
 
INTDAY
(in 1/100 Sec)
TARDAY
(in 1/100
CU)
INTNT1
(in 1/100 Sec)
NTAR1
(in 1/100
CU)
INTNT2
(in 1/100 Sec)
NTAR2
(in 1/100
CU)
INTNT3
(in 1/100 Sec)
NTAR3
(in 1/100
CU)
INTNT4
(in 1/100 Sec)
NTAR4
(in 1/100
CU)
1000
30
1500
30
2000
30
2500
30
3000
30
The calculation should result in 1/100th currency units.
Allocation of the comma position: either -3, -2, -1,0, +1, +2 or +3
(The price per time clock is given in 1/100th currency units.)
Input:
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=1,COMPOS=+2;
Creating of the tariff table.
Input:
ADD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=ABR02,INTDAY=1000,TARDAY=30,INTNT1=1500,NTAR1=30,INTNT2=2000,NTAR2=30,INTNT3=2500,NTAR3=30,INTNT4=3000,NTAR4=30,TARBAS=-150,TARMIN=200,SEGTBLNO=22,CHPER=Y,BCHLFACT=100;
4.
Adding tariff group table 1 for carrier 1 and service VOICE and NORM for category of calling party, with tariff table 1.
Input:
ADD-TTBL:TBL=GRP,GROUPNO=1,CARRIER=1,CATPTY=NORM,SERVICE=VOICE,TARTBLNO=1;
5.
Adding tariff group 1 for carrier 1 and services VOICE and DTE and SCRSPC for category of calling party, with tariff table 1.
Input:
ADD-TTBL:TBL=GRP,GROUPNO=1,CARRIER=1,CATPTY=SCRSPC,SERVICE=VOICE&DTE,TARTBLNO=1;
6.
Adding tariff group 1 with clock information for zone DIST01, FIXDAY=1, FPLSDAY=KA, PPLSDAY=999999, FIXN1=1, FPLSN1=KM, PPLSN1=0, FIXN2=12, FPLSN2=999999, PPLSN2=10000, FIXN3=12, FPLSN3=0, PPLSN3=0, FIXN4=1, FPLSN4=KA, PPLSN4=11111, SEGTBLNO=1, CHPER=Y.
Input:
ADD-TTBL:TBL=CLK,TARTBLNO=1,ZONE=DIST01,FIXDAY=1,FPLSDAY=KA,PPLSDAY=999999,FIXN1=1,FPLSN1=KM,PPLSN1=0,FIXN2=12,FPLSN2=999999,PPLSN2=10000,FIXN3=12,FPLSN3=0,PPLSN3=0,FIXN4=1,FPLSN4=KA,PPLSN4=11111,SEGTBLNO=1,CHPER=Y;
7.
Set up of tariff CITY-CALL for carrier 1, zone INT01 and service VOICE. The category of calling party is NORM. The tariff table 1 should be used for the display and the rate periode table 1. The display should result on 2 positions after comma. In the selection group the tariff group1 should be used with the tariff table 2. The tariff group 1 with the tariff table 2 should be used too for the output on the OPP, where the costs are displayed on 2 comma positions.
In the tariff CITY-CALL one second takes 0,127 Pfennig (WOCU table).
Allocation of tariff group 0 on carrier 1 and entry of tariff table1 for the user category NORM and service VOICE for the display.
Input:
ADD-TTBL:TBL=GRP,GROUPNO=0,CARRIER=1,CATPTY=NORM,SERVICE=VOICE,TARTBLNO=1;
Allocation of tariff group 1 for carrier 1 and entry of tariff table 2 for the calling party category NORM and service VOICE as base for the cost calculation in data record.
Input:
ADD-TTBL:TBL=GRP,GROUPNO=1,CARRIER=1,CATPTY=NORM,SERVICE=VOICE,TARTBLNO=2;
Set up of general tariff records for display and data records. The cost calculation should result on 1/100000th currency units, the output on the display and on the operator’s position (OPP) on 2 comma positions.
Input:
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=1,COMPOS=2HT;
CHANGE-TTBL:TBL=GEN,ELEMENT=COMPOS,TARTBLNO=2,COMPOS=2HT;
Set up tariff tables 1 and 2 with 0,127 Pfennig per second.
Input:
ADD-TTBL:TBL=WOCU,TARTBLNO=1,ZONE=INT01,INTDAY=100,TARDAY=127,INTNT1=100,NTAR1=127,INTNT2=100,NTAR2=127,INTNT3=100,NTAR3=127,INTNT4=100,NTAR4=127,TARBAS=+0,TARMIN=0,SEGTBLNO=1,CHPER=Y,BCHLFACT=100;
ADD-TTBL:TBL=WOCU,TARTBLNO=2,ZONE=INT01,INTDAY=100,TARDAY=127,INTNT1=100,NTAR1=127,INTNT2=100,NTAR2=127,INTNT3=100,NTAR3=127,INTNT4=100,NTAR4=127,TARBAS=+0,TARMIN=0,SEGTBLNO=1,CHPER=Y,BCHLFACT=100;
To the controlling of the cost calculation still the carrier 1 must be placed on calculation after time.
Input:
CHANGE-GEFE:TYPPARAM=CAR,CARRIER=1,TYPE=TIME,CHRGPLS=N;
For back calculation of units, a WCU table with number 1 (which is entered in tariff group 0) and with 12,1 Pfennig per second is necessarly.
Input:
ADD-TTBL:TBL=WCU,TARTBLNO=1,TARMIN=0,METHOD=FACTOR,FACTOR=1000,LT1=0,TAR1=121;
The priority of the unity price of the WCU table must set on 1/1000th.
Input:
CHANGE-DAVF:COMPOS=2T;
Attention: If the comma position in AMO-DAVF is modified e.g. from +2 to 2T (of calculation in 1/100th currencies on calculation in 1/1000th currencies) it influences the calculations of all WCU tables. If the comma position in AMO-DAVF is modified the WCU tables have to be modified too.
Input:
ADD-TTBL:TBL=WCU,TARTBLNO=1,TARMIN=0,METHOD=FACTOR,FACTOR=1000,LT1=0,TAR1=12;
Note: As WCU table, if a CCU table is created instead of a FACTOR table, the field CONCHRG from the backcounted units (see "calculation method" in the table on page 2729) is calculated.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.