212.3
Parameter Description
ATNDGR
Attendant group number
Type of Input
:
single value,
mandatory (ADD, CHANGE)
chained single values,ranges,optional
(REGENERATE, DELETE, DISPLAY)
Possible Values
:
one of the created attendant groups
CD
Attendant console group access code
Type of Input
:
single value, chained single values
:
n action DISPLAY,TYPE=NAME only one single value (input is ignored if “1000 Customer Names” is not activated)
Possible Values
:
TYPE=ATNDGR: call codes that have been allocated digit analysis results (AMO
WABE
),
TYPE=NAME:
- “1000 Customer Names” is not activated: customer names can only be assigned to the indial call codes 00,01,...,09
- “1000 Customer Names” is activated: indial call code of an attendant group (1 to 6 digits)
CPS
Call progress state
Type of Input
:
single value, chained single values
optional
Possible Values
:
traffic situations allowed for the corresponding
digit analysis result (see AMO
WABE
)
DPLN
Feature access group / dial plan
Type of Input
:
single value, chained single values, ranges
optional (REGENERATE)
mandatory, if a CD is grouped according to DPLN
groups in the DPLN lists (ADD, CHANGE, DELETE)
Possible Values
:
0 to 15
NAME
Customer name for an indial attendant group access code
When a call with the indial call code is switched through to an ATND in the group, these name will be displayed at the ATND.
Type of Input
:
single value, mandatory
Possible Values
:
any (up to 22 characters)
TYPE
Type of function
Type of Input
:
single value, mandatory
Possible Values
:
ATNDGR
= attendant group
NAME
= customer name
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.