Activate and deactivate call forwarding for subscribers by means of the attendant console or station.

Permit remote-control FWD

Block remote-control FWD

The attendant console (ATND) and subscribers can activate and deactivate variable call forwarding (FWD) for subscribers (FWD object). Any station number in the network is available. Any call numbers that the subscriber has been able to set up as a FWD destination can be designated as the call forwarding destination.

First you must set up the codes for activating (AFWDREM) and deactivating (DFWDREM) the FWD from the ATTND and from the station using the AMO WABE.

In order to permit remote-control FWD from the console and from the station in the network, you must set the CFOS COT parameter. This COT parameter is tested on the link between the ATTND and FWD object both for incoming and for outgoing digital tie trunks. The link between ATTND and station and FWD object must be set up with LCR.

The ATTND and the station must have FWDFAS rights, otherwise they cannot execute the remote-control FWD. Rights are administered with AMO COS.

COS <FWDFAS>, DPLN <DAR=AFWDREM, DAR=DFWDREM>

Digital trunks

ECMAV2, PSS1V2