17.13. CFTR - Activate, deactivate and check routes for call forwarding in central
office 
Feature:
Activate, deactivate and check routes for call forwarding in central office
Call forwarding at a main station
Function:
This parameter allows routes for call forwarding in the central office to be activated,
deactivated and checked It can be specified for all services and may only be set for
Euro
ISDN main stations or on the incoming side of digital tie trunks and interface circuits.
The function is only executed if an authorized user enters the order for the FWD object
with the PIN administered for this route.
If the parameter is set on the incoming side of a digital tie trunk circuit or interface
circuit, then FWDDIR authorization is simulated for the user, irrespective of whether
or not
the protocol transfers classmarks.
AMO Interrelationships:
FEASU Features in the SWU:
PINNW .... Enable PIN network-wide
CFTR .... For example, Release call forwarding/call forwarding - no answer for voice
service
COS Classes of Service:
FWDDIR .... Activate, deactivate and check routes for call forwarding in central office
RICHT Group Trunk Groups to Form Routes:
PIN ... PIN for routes for call forwarding in the central office
Device types:
Digital tie trunk circuits, interface circuits and CO trunk circuits
Protocol variants:
For example:
ECMA1 - ECMA QSIG V1 protocols
ECMA1R - ECMA QSIG V1 protocol
ECMAV2 - CorNet-NQ Issue 2.1 Dec. 96 Basic ETSI
ECMAV2R - QSIG ETSI ETS 300 172 3rd. with SS 2nd.
PSS1V2 - CorNet-NQ Issue 2.1 Dec. 96 Basic ISO/IEC
PSS1V2R - QSIG ISO ISO/IEC 11572 2nd. with SS
EDSGER - EDSS1 protocol for Germany
ETSI - Standard EURO-ISDN