17.34. MICC - MCID call clearing control required 
Feature:
DSS 1 Terminals, MCID Malicious Call Identification (trace, identify malicious callers)
Function:
If a call is to be registered on a network-wide basis and if the connection line contains
a
DSS1 gateway, then the COT parameter MICC must be set on the DSS1 gateway (user side).
This
enables a network-wide call registration to be carried out after clearing.
AMO Interrelationships:
COS Classes of Service:
MCIDM: Class of service for activating the registration of an incoming call during
the call and immediately after cleardown. This can be activated by means of the functional
DSS1 protocol or by means of the TRACE digit analysis result.
TRACE: This class of service must be set together with the MCIDM class of service so
that all incoming calls can be registered automatically. Additional manual registration
is
not possible.
MCIDA: Automatic registration of ringing malfunctions; the subscribers in question
are calling subscribers that release before a call connection is established.
Device types:
Digital trunks
Protocol variants:
For example, EDSGER (EDSS1 protocol for Germany), EDSAUT (EDSS1 protocol for Austria),
EDSSUI (EDSS1 protocol for Switzerland) EDSFRA (EDSS1 protocol for France)