Collapse AllExpand All

11.4.4. Code Calling in MIXED MODE Operation with CODE DIGIT Previous topic Parent topic Child topic Next topic

  • The code digits are assigned in the DPLN according to the operating modes and paging modes of the code calling system.
    CCDIS
    Code digit
    for
    DISPLAY OPERATION
    CCMEETME
    "
    "
    MEET-ME
    CCITN
    "
    "
    DISPLAY (overwrite)
    CCVCE
    "
    "
    VOICE ANNOUNCEMENT
    CCSURG
    "
    "
    URGENT PAGING
    CCS
    "
    "
    NORMAL PAGING
    In addition, the digit analysis result CCSCD (code calling with code digit) must be assigned in the DPLN instead of CCSN. If MEET-ME operation is possible, a code must also be assigned for the digit analysis result CCANS.
  • Configure the trunk module and trunk group, assign the class of trunk and class of parameter and configure the trunk circuit as for DISPLAY OPERATION.
    • In the case of MEET-ME operation with code digit, the value CCM must be specified for the parameter PAR in the COP command.
    • In the case of DISPLAY OPERATION (CCDIS and CCITN), the parameter ABLK=Y must be declared in the TSCSU command.
  • In addition, for MEET-ME operation with code digit, the special answering circuit must also be configured (AMO SSC), as well as the routes for the code calling and answering codes (see Section 156.3, "CC in MEET-ME Operation").
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.