11.4.5. Code Calling in TRANSPARENT MODE Operation 
The transparent mode is possible for all types of operation, and is
set by declaring the parameter STNOLEN in the TSCSU command.
|
STNOLEN
|
= 0
|
means no transparent mode; the recipient's
address must be assigned in the DPLN.
|
|
STNOLEN
|
= 1-20
|
means transparent mode will be used, and defines
the length of the code to be transmitted to the CC (B-blocks).
The
code length can either be fixed or variable, depending on the ENDRAUT
parameter (in AMO ZAND:TYPE=CCM):
ENDRAUT = NO: fixed length
ENDRAUT
= YES: variable length
STNOLEN defines the maximum length. Terminate
shorter codes with '#'. En-bloc dialing (number redial, destination
keys, key module, etc.) is not possible, if mixed mode with code digit
Section 156.4,
"Code Calling in MIXED MODE Operation with CODE DIGIT"
is used.
|