Section 16.1. Organization of COP parameters

16.1. Organization of COP parameters

General parameters
ACKB, ACKF, (BTOF), SACK, COCN, DITW, CTGF, RBLK, FDGT, NTON, IMEX, BR64, NOAN, (NONA), (NOTO), (LKNQ), TRAC, LSUP, L3AR, ANS, EMOV, ANNC, WOT2, NO1A, PDP1, PDP2, PDP3, PDP4, RLSB, RLSA, (RMSG), (RRST), SFRM, TIM1, TIM2, TIM3, TIM4, SDL, RCLA, EODA, EOD, RGSZ, DTT, DTN, DTBR, (DTV), TDED, IDP1, IDP2, IDP3, IDP4;
Parameters for test purposes and approvals
APPR, ASNM;
Announcements
AANT;
MFC
ABPD
DTMF
DTM1, DTM2, DTM3, DTM4
Special parameters, Exceptions
EO10, NSDL, TIE, SEDL, (PNIO);
CCE
CCR, CCM, CCTN;
MLPP
PDIG, PRMT, RDIG
Associated parameters
DTMF and one of DTM1/2/3/4 SDL and one of TIM1/2/3/4 EODA only works if EOD is set (unilateral dependency!)
Mutually exclusive parameters
ANNC - DTN
Parameters that must be set
PDP1 or one of PDP2/3/4 with analog trunks SPTR up to and including EV1.0 with digital trunks IDP1 or one of IDP2/3/4 with analog trunks
Country-specific parameters
Italy	ILRW
Poland	BTN1, BTN2, BTN3, NBAR;
Spain	LSRB
China	COEI, ICAC, LWCC
CIS	ANIC, ANIW, ANIO, AST1, AST2; IVSN, NOCH, LAO0, LAO3, LAI8, LSO0, LSO3 LSI0, LSI3, DT1A, DT2A, RF0C, RF1C, RF2C, RF3C;
USA	ALUL, NAAT,

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.