CHANGE-SDAT:STNO=7461,TYPE=ATTRIBUT,
AATTR=DSSDEST&TEAMEXEC;

• Add-on device for executive.

  CHANGE-SBCSU:STNO=7461,OPT=OPTI,REP=1;
  

• Define key assignments for executive function.

  CHANGE-TAPRO:STNO=7461,DIGTYP=OPTIA1,KY01=DSS,
  KY02=RNGXFER,KY03=DSS,KY06=RNGXFER,KY07=LINE,
  KY08=LINE; 
  

• Direct station selection for executive 1 to secretary 1 and secretary 2.

  ADD-ZIELN:STNO=7461,TYPE=DSS,KYNO=20,DESTNOD=7362;
  
  ADD-ZIELN:STNO=7461,TYPE=DSS,KYNO=22,DESTNOD=7462;
  

• Ring transfer destination is secretary 2.

  ADD-ZIELN:STNO=7461,TYPE=RNGXFER,KYNO=21,STNO1=7461,
  STNO2=7491;
  

• Configure COS with GRPCAL for phantom user.

  ADD-COSSU:NEWCOS=50,AVCE=FWDBAS&FWDECA&FWDEXT&
  FWDNWK&FWDFAS&FWDDIR&MB&COSXCD&TA&CDRSTN&CDRC&
  GRPCAL&TNOTCR; 
  

• Configure phantom line for private station number, executive 2 (optional).

  ADD-SBCSU:STNO=7464,OPT=OPTI,CONN=DIR,DVCFIG=OPTIIP,
  COS1=50,COS2=50,LCOSV1=1,LCOSV2=1,LCOSD1=1,LCOSD2=1,
  DPLN=0,ITR=0,COSX=0,REP=1,STD=26,INS=SIGNOFF,
  ALARMNO=0,CBKBMAX=5,TEXTSEL=GERMAN,HMUSIC=0,
  CALLOG=TRIES,SERVID=0; 
  

• Configure executive 2 as key set.
  • Check if enough memory is available.

    DISPLAY-DIMSU:TYPE=CC,CCTLOPT=KEYSYS;

    ADD-KCSU:STNO=7461,TYPE=PRIM,PRIMKEY=26,RIOP=YES,
    ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES,BUSYRING=NORING; 
    

• Configure private line for executive 2.

  ADD-KCSU:STNO=7464,TYPE=PRIM,PRIMKEY=27,RIOP=YES,
  ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES,BUSYRING=NORING;
  
  ADD-KCSU:STNO=7461,TYPE=SEC,KYNO=27,STNOSEC=7464,
  RIOP=YES;
  

• Configure key assignments for conference corner telephone.

  CHANGE-TAPRO:STNO=7465,DIGTYP=OPTIIP,KY04=LINE,
  KY10=LINE;
  

• Conference corner telephone is configured as key set (optional).

  ADD-KCSU:STNO=7465,TYPE=PRIM,PRIMKEY=4,RIOP=YES,
  ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES,BUSYRING=NORING,
  AICS=YES; 
  

• Executive prime line is configured as secondary line.

  ADD-KCSU:STNO=7465,TYPE=SEC,KYNO=10,STNOSEC=7461,
  RIOP=YES;