8.4.3.2.6. Configure Secretary 1 in Node 300 
Station 7362 is already configured as a normal station.
- Configure COS with GRPCAL for phantom user.
ADD-COSSU:NEWCOS=50,AVCE=FWDBAS&FWDECA& FWDEXT&FWDNWK&FWDFAS&FWDDIR&MB&COSXCD& TA&CDRSTN&CDRC&GRPCAL&TNOTCR;
- Phantom line for executive 1 at secretary 1.
ADD-SBCSU:STNO=7390,OPT=OPTI,CONN=DIR,DVCFIG=OPTIIP, COS1=50,COS2=50,LCOSV1=50,LCOSV2=1,LCOSD1=1,LCOSD2=1, DPLN=0,ITR=0,COSX=0,REP=1,STD=26,SECR=N, INS=SIGNOFF,ALARMNO=0,CBKBMAX=5,TEXTSEL=GERMAN,, HMUSIC=0,SERVID=0;
- Configure phantom line for executive 2 at secretary 1.
ADD-SBCSU:STNO=7391,OPT=OPTI,CONN=DIR,DVCFIG=OPTIIP, COS1=13,COS2=13,LCOSV1=1,LCOSV2=1,LCOSD1=1,LCOSD2=1, DPLN=0,ITR=0,COSX=0,REP=1,STD=26,SECR=N, INS=SIGNOFF,ALARMNO=0,CBKBMAX=5,TEXTSEL=GERMAN, HMUSIC=0,SERVID=0;
- Mark prime line and phantom line at secretary 1 as team secretary.
CHANGE-SDAT:STNO=7362,TYPE=ATTRIBUT,AATTR=DSSDEST& TEAMSECR; CHANGE-SDAT:STNO=7390,TYPE=ATTRIBUT,AATTR=TEAMSECR; CHANGE-SDAT:STNO=7391,TYPE=ATTRIBUT,AATTR=TEAMSECR;
- Configure add-on device for secretary 1.
CHANGE-SBCSU:STNO=7362,OPT=OPTI,REP=1;
- Define key assignments for secretary function.
CHANGE-TAPRO:STNO=7362,DIGTYP=OPTIA1,KY01=DSS, KY02=RNGXFER,KY03=LINE,KY04=DSS,KY05=RNGXFER, KY06=LINE,KY07=RCUTOFF,KY08=LINE,KY09=REP;
- Configure direct station selection for secretary 1 to executive 1 and executive 2.
ADD-ZIELN:STNO=7362,TYPE=DSS,KYNO=20,DESTNOD=7261; ADD-ZIELN:STNO=7362,TYPE=DSS,KYNO=23,DESTNOD=7461;
- Define ring transfer destinations for secretary 1 to executive 1 and executive 2.
ADD-ZIELN:STNO=7362,TYPE=RNGXFER,KYNO=21,STNO1=7261, STNO2=23851; ADD-ZIELN:STNO=7362,TYPE=RNGXFER,KYNO=24,STNO1=7461, STNO2=23852;
- Define delegate for secretary 1 is secretary 2.
ADD-ZIELN:STNO=7362,TYPE=REP,STNOREP=7462, STNOEX1=7261,STNOEX1R=7490,STNOEX2=7461, STNOEX2R=7491;
- Configure secretary 1 as key set with phantom line for executive 1 and executive 2.
ADD-KCSU:STNO=7362,TYPE=PRIM,PRIMKEY=27, RIOP=YES,ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES, BUSYRING=NORING; ADD-KCSU:STNO=7390,TYPE=PRIM,PRIMKEY=22, RIOP=YES,ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES, BUSYRING=NORING; ADD-KCSU:STNO=7391,TYPE=PRIM,PRIMKEY=25, RIOP=YES,ORLNPF=PRIME,TMLNPF=RING,SGLBMOD=YES, BUSYRING=NORING; ADD-KCSU:STNO=7362,TYPE=SEC,KYNO=22,STNOSEC=7390, RIOP=YES; ADD-KCSU:STNO=7362,TYPE=SEC,KYNO=25,STNOSEC=7391, RIOP=YES;
- Connect prime line from executive 1 (node 200) with phantom line of secretary 1 and
secretary 2
via the network-wide call pickup 1.
ADD-AUN:GRNO=1,STNO=7390,REMAC=808902,REMGRNO=1, DISTNO=NO,NOTRNG=ON3,PUSECOND=NO,SIGNAL=ALL; ADD-AUN:GRNO=1,REMAC=808904,REMGRNO=1,DISTNO=NO, NOTRNG=ON3,PUSECOND=NO,SIGNAL=ALL;
- Connect prime line from executive 2 with phantom line of secretary 2 and secretary
2 with help
of the network-wide call pickup 2.
ADD-AUN:GRNO=2,STNO=7391,REMAC=808904,REMGRNO=2, DISTNO=YES,NOTRNG=ON3,PUSECOND=NO,SIGNAL=ALL;
- Connect prime line of secretary 1 with prime line of secretary 2 via call pickup 3.
ADD-AUN:GRNO=3,STNO=7362,REMAC=808904,REMGRNO=3, DISTNO=YES,NOTRNG=ON3,PUSECOND=NO,SIGNAL=ALL;
- Assign team number for DMS, unambiguous in the network.
CHANGE-AUN:TYPE=GR,GRNO=1,TEAMNO=1; CHANGE-AUN:TYPE=GR,GRNO=2,TEAMNO=1;
- Give secretary 1 a name.
ADD-PERSI:TYPE=STN,STNO=7362,NAME="SECR 1";
- Give phantom line a name that appears during ring transfer.
ADD-PERSI:TYPE=STN,STNO=7390,NAME="SECR 1*"; ADD-PERSI:TYPE=STN,STNO=7391,NAME="SECR 1*";
- You must configure executive phantom lines that are at the secretary as secret users
so that the
caller does not see the station number of the phantom line during ring transfer.
CHANGE-SBCSU:STNO=7390,SSTNO=Y; CHANGE-SBCSU:STNO=7391,SSTNO=Y; CHANGE-ZAND:TYPE=ALLDATA2,DISPTGNA=YES;
- Only the name of the executive phantom line is displayed during ring transfer.
The name is displayed independently of the station number display. This
parameter applies system wide for all station devices.
CHANGE-ZAND:TYPE=ALLDATA2,INDNADIS=YES;