5.6.9.11. Trunk Identity Configuration 
The Trunk Identity service is enabled or disabled by configuration
parameter. This parameter is TIDOP in AMO LWPAR. This parameter must
be configured = YES to enable the mapping of Trunk Identity between OpenScape
4000 and DPNSS.
To turn trunk identity mapping on:
CHA-LWPAR:TYPE=CDG,BLNO=<number>,CDGTYPE=CONF,TIDOP=Y;
To turn trunk identity mapping off:
CHA-LWPAR:TYPE=CDG,BLNO=<number>,CDGTYPE=CONF,TIDOP=N;