5.6.9.12. Routing DX calls to AC-Win MQ source keys 
This feature allows the CLC of ISRM messages from the DX to generate
a particular priority in the classmarks of the Setup message sent to
the OpenScape 4000. There are four categories of calls for which priorities
are assigned, the brackets show the parameter used to change the value.
- Internal (ICPN)
- Analogue trunk (ATPCN)
- DASS (DASSPCN)
- Analogue PSTN (APCPN)
There are default values for these parameters which are:
- Internal = 11
- Analogue trunk = 12
- DASS = 13
- Analogue PSTN = 14
The priority has a range of 1 to 16.
To change the value of a parameter use the following ( for example
to set the call priority of internal calls to 6) :
CHA-LWPAR:TYPE=CDG,BLNO=<number>,CDGTYPE=CONF2,ICPN=6;
Calls to the operator can be routed according to their
priority to a particular ACWIN queue by use of the AMO parameter VFGR.