5.18.3. General Information on the MFC Tables 
The OpenScape 4000 hard disk meanwhile has MFC tables for many countries
and applications. You must modify these for the individual application.
This is possible at any time. If you make the same modifications over
and over, it would be useful to report this so that the base initialization
can be adjusted. Display the list as follows:
DISPLAY-MFCTA: MFCVAR=1,TYPE=HD;
IMPORTANT:
You can use Table 25 (CCITT Standard)
as the generally valid base configuration. Configure SOCOTEL signaling
with Table 3 and IBERCOM signaling with Table 4 or 10.