5.18.3.9. Dialing Monitoring Combined With Intercept to Attendant Console
MFC-R2 signaling allows you to send selected signals as pulses. You
can configure two signals (MFCTA). The IMP signal (usually A-4) is sent
as a pulse when the call encounters busy (no intercept) after the monitoring
response (see above). The signal IMP2 (usually A-6) is sent as a pulse
when the call encounters a free indication after the monitoring response.
This case occurs when the call was intercepted to the attendant console.
- Change the MFC table (MFCTA) as follows:
CHANGE-MFCTA: MFCVAR=x, TYPE=MFCVAR, OPT=MISC, IMP=4; CHANGE-MFCTA: MFCVAR=x, TYPE=MFCVAR, OPT=SUPERV, IMP2=6;