5.19.4.2. Connecting NI BRI Data Devices via the SLMQ3 Card 
Example for configuring a subscriber with NI BRI data device (connected
with SLMQ3 port via PNT) in a PBX:
- If no SLMQ3 port is available (module not configured or no free ports)
ADD-BCSU:MTYPE=PER,(LTG=1,)LTU=5,SLOT=67,PARTNO="Q2479-X";
- Configure subscriber 3188 with NI BRI data device that is connected to
the SLMQ3 card via PNT.
ADD-SBCSU:SSTNO=3188,OPT=FBUS, CONN=PNT, PEN=1-5-67-0, DVCFIG=SET600&DTE,COS1=5, COS2=6,LCOSV1=11, LCOSV2=12, LCOSD1=21, LCOSD2=22, SPROT=SBNIBRI, DPROT=SBNIBRI, SOPTIDX=7, DOPTIDX=7, BASICSVC=UDI64;
- Configure MSN 3189 on S0 bus 3188 */ NOTE: The NI BRI protocol set for
the S0 bus 3188 is also automatically used for all accompanying MSNs
and can be changed only for the 3188.
ADDSBCSU:SSTNO=3189,OPT=MSN,MAINO=3188,BASICSVC=UDI64&UDI64;