Collapse AllExpand All

5.37.2.6. Trunk Configuration Previous topic Parent topic Child topic Next topic

In normal circumstances, the parameters of the VC trunks are based on the parameters of the partner trunk. However there are some parameters which have to be different:
  • COTNO:
The VCM trunk requires a COT which contains the parameter SPCM. All other trunks should not have this COT parameter.
  • DEV:
The VC trunk has to be added with the device type VCCONN (digital tie trunk circuit with voice compression).
  • TGRP:
The VC trunks should be in own trunk groups.
  • BCHAN:
The VCM has, depending from board type, 7 or 15 B-channels.
  • PROTVAR:
The protocol variants CORNV33 or ECMA1 should be used prevered because they support the new protocol element "Allowed Compression/Decompression Cycles".
The two corresponding VCM trunks (Node A / Node B) have to be configured with a MASTER/SLAVE relation (like S0/S2 trunks). This has to be controlled by the loadware parameter.

Example of a S2/VCM Configuration:

The different/important parameter values are marked bold.

S2 Trunk:

ADD-TDCSU:OPT=NEW,PEN=1-2-49-0,COTNO=20,COPNO=0,DPLN=0,
ITR=0,COS=1,LCOSV=1,LCOSD=1,CCT="            ",DESTNO=0,
PROTVAR=CORNV33,SEGMENT=1,TCHARG=N,SUPPRESS=0,TRACOUNT=31,
SATCOUNT=MANY,NNO=604,ALARMNO=0,FIDX=1,CARRIER=1,
ZONE=EMPTY,FWDX=1,DEV=S2CONN,TGRP=98,SRCHMODE=ASC,
BCHAN=1&&30,BCNEG=Y,BCGR=1,INS=N,LWPAR=8;

VCM Trunk:

ADD-TDCSU:OPT=NEW,PEN=1-1-55-0,COTNO=50,COPNO=0,DPLN=0,
ITR=0,COS=1,LCOSV=1,LCOSD=1,CCT="            ",DESTNO=0,
PROTVAR=CORNV33,SEGMENT=1,TCHARG=N,SUPPRESS=0,TRACOUNT=31,
SATCOUNT=MANY,NNO=604,ALARMNO=0,FIDX=1,CARRIER=1,
ZONE=EMPTY,FWDX=1,DEV=VCCONN,TGRP=99,SRCHMODE=ASC,
BCHAN=1&&15,BCNEG=Y,BCGR=1,INS=N,LWPAR=8;

Example of a S0/VCM Configuration:

The different/important parameter values are marked bold.

S0-Trunk:

ADD-TDCSU:OPT=NEW,PEN=1-02-115-0,COTNO=20,COPNO=0,DPLN=0,
ITR=0,COS=1,LCOSV=1,LCOSD=1,CCT="            ",DESTNO=0,
PROTVAR=CORNV33,SEGMENT=1,TCHARG=N,SUPPRESS=0,TRACOUNT=31,
SATCOUNT=MANY,NNO=604,ALARMNO=0,FIDX=1,CARRIER=1,
ZONE=EMPTY,FWDX=1,DEV=S0CONN,INS=Y,TGRP=100,SRCHMODE=ASC,
MASTER=Y,SMD=Y,CNTRNR=0,BCNEG=N;

VCM-Trunk:

ADD-TDCSU:OPT=NEW,PEN=1-01-067-0,COTNO=50,COPNO=0,DPLN=0,
ITR=0,COS=1,LCOSV=1,LCOSD=1,CCT="            ",DESTNO=0,
PROTVAR=CORNV33,SEGMENT=1,TCHARG=N,SUPPRESS=0,TRACOUNT=31,
SATCOUNT=MANY,NNO=604,ALARMNO=0,FIDX=1,CARRIER=1,
ZONE=EMPTY,FWDX=1,DEV=VCCONN,TGRP=101,SRCHMODE=ASC,
BCHAN=1&&7,BCNEG=Y,BCGR=1,INS=N,LWPAR=8;