Collapse AllExpand All

9.2.2. Example of Station Number Conversion Previous topic Parent topic Child topic Next topic

  • Configure the code(s) with: 
    ADD-WABE:CD=7144,DAR=STN; 

ADD-WABE:CD=7145,DAR=STN; /* STN still to be added */
    IMPORTANT:
    The code can only be assigned for the CPS 6 and 7 (exchange indial). This means it can be assigned to other DARs in different CPSs. If TYPE= DID is set, the AMO RUFUM only checks for the STN DAR and will accept any CPS.
  • Configure number conversion as follows: 
    ADD-RUFUM:TYPE=DID,DID1=7144, DID2=7145;
    DID1 = direct inward dialing number DID2 = station number to be converted to (station must be assigned under this number)
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.