10.41.5.4. OpenStage Busy Lamp Field 
In AMO TAPRO the appropriate key layout for the terminal must be chosen.
The OpenStage busy lamp field is also supported for optiPoint 500.
Hint:
Adding each BLF module uses 5 counts of DIMSU parameter OPTEXP.
OpenStage BLF for OpenStage
CHANGE-SBCSU:STNO=3100,OPT=OPTI,REP=0,BLF=Y; CHANGE-TAPRO:STD=55,DIGTYP=OST40BLF;
OpenStage BLF for optiPoint 500
The key configuration is similar as for an OpenStage device with busy
lamp field. Not 90 keys are configured on one add-on device but 5 add-on
devices each with 18 keys. So each column with 18 keys on the busy lamp
field can be thought as one add-on device.
For OpenStage BLF for optiPoint 500 the DIGTYP value OPTIBLF
has been introduced for the busy lamp field in AMO TAPRO. A layout with
this type has to be used for the key layout configuration of an optiPoint
device with BLF.
A number for the key layout (STD=127) for the DIGTYP=OPTIBLF
must be configured.
Example:
CHANGE-SBCSU:STNO=3110,OPT=OPTI,REP=0,BLF=Y; CHANGE-TAPRO:STD=127,DIGTYP=OPTBLF,KY01=CH; REGEN-TAPRO:TYPE=STD,STD=127;
CHANGE-TAPRO:,127,OPTIBLF ,CH ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,
" ";
CHANGE-TAPRO:,127,OPTIB1 ,FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ;
CHANGE-TAPRO:,127,OPTIB2 ,FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ;
CHANGE-TAPRO:,127,OPTIB3 ,FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ;
CHANGE-TAPRO:,127,OPTIB4 ,FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ;
CHANGE-TAPRO:,127,OPTIB5 ,FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ,FREE ,FREE ,
FREE ,FREE ,FREE ;
AMO-TAPRO-111 PROGRAMMABLE KEY DEFINITION FOR DIGITAL
TERMINALS REGENERATE COMPLETED;