10.42.14.2. Duration of PIN Activation 
The PIN can be
activated for 1 call only, permanently or for a pre-defined time. The
timer required for the latter option is administered with the CTIME AMO.
- Duration of PIN activation
Set PIN duration for 1 call only
CHA-PERSI:TYPE=COPIN,COPIN=number,PINDUR=ONE;
Set PIN duration to 'permanent'CHA-PERSI:TYPE=COPIN,COPIN=number,PINDUR=PERM;
Set PIN duration to 'timed'CHA-PERSI:TYPE=COPIN,COPIN=number,PINDUR=TIME;
- Set timer for timed PIN for PIN types PIN1 - 5 and 10 to 15 for Voice
and Non Voice
CHA-CTIME:TYPESWU=CP1,PINV01=number,PINNV1=number; CHA-CTIME:TYPESWU=CP1,PINV02=number,PINNV2=number; CHA-CTIME:TYPESWU=CP1,PINV03=number,PINNV3=number; CHA-CTIME:TYPESWU=CP1,PINV04=number,PINNV4=number; CHA-CTIME:TYPESWU=CP1,PINV05=number,PINNV5=number; CHA-CTIME:TYPESWU=CP1,PINV010=number,PINNV10=number; CHA-CTIME:TYPESWU=CP2,PINV011=number,PINNV11=number; CHA-CTIME:TYPESWU=CP2,PINV012=number,PINNV12=number; CHA-CTIME:TYPESWU=CP2,PINV013=number,PINNV13=number; CHA-CTIME:TYPESWU=CP2,PINV014=number,PINNV14=number; CHA-CTIME:TYPESWU=CP2,PINV015=number,PINNV15=number;
Important note on the PIN timer:
For this timer, values between 1 second and 18 hours can be entered.
Setting the timer value in minutes (default: 5 min.) is recommended,
as the timer is restarted after end of call and the active time of the
PIN is extended. Setting the timer value in hours and a high number of
PIN activations could lead to lack of resources, i.e. timer elements
which, in turn, leads to system restarts.