168.4.2 Advisories

 
H01:
WHEN ENTERING STATION NUMBER RANGES, THE NUMBER OF DIGITS FOR EACH LIMIT
MUST BE EQUAL. THE STNO RANGE <xxxxxx>-<yyyyyy> CANNOT BE PROCESSED.
H02:
<xxxxxx> NO FREE SPDI MEMORY. THE STATION IS CONFIGURED WITHOUT SPDI,
RESPECTIVELY SPDI IS NOT CHANGED..
H05:
<xxxxxx> THE PARAMETER DIAL IS NOT PERMITTED FOR DIGITAL DEVICES.
ENTRIES WILL BE IGNORED.
H06:
<xxxxxx> THIS STATION IS CONFIGURED AT PEN <nn-nn-nnn-nnn>.
H07:
A RANGE INPUT FOR THE PARAMETER STNO MUST NOT COMPRISE MORE THAN 600
STATIONS. THE RANGE HAS BEEN TRUNCATED TO <xxxxxx>-<yyyyyy> FOR PROCESSING.
H08:
<xxxxxx> STATION DATA DELETED.
H09:
<xxxxxx> STATION DATA CHANGED.
H11:
<xxxxxx> CONTROL HAS BEEN PASSED TO CALL PROCESSING FOR STATION ACTIVATION.
H12:
<xxxxxx> THE STATION IS NOT ACTIVE.
H13:
<xxxxxx> THE STATION IS NOT ACTIVE (ID CARD USER).
H14:
<xxxxxx> DOWNLOADING OF PARAMETER <COFIDX/CCTIDX/PULSTYPE/CMIND/
 PULSLEV/DHPAR/DIAL> TO THE BOARD IS ONLY INITIATED
AFTER DEACTIVATION AND REACTIVATION OF THE CIRCUIT
( RESTART-DSSU:TYPE=PEN,PEN1=...; ).
H16:
<xxxxxx> <COFIDX/CONN> IS A PEN-DEPENDANT PARAMETER WHICH IS IGNORED FOR
VIRTUAL STATIONS (SIGNED OFF, FLOATING, ACLSTN).
H18:
<xxxxxx> NO STATION HAS BEEN CONFIGURED.
H19:
THE STNO <xxxxxx> HAS THE NEW NUMBER <yyyyyy>.
PLAUSIBLE PARAMETER ENTRIES HAVE ALSO BEEN CHANGED.
H20:
NONE OF THE SPECIFIED STATIONS IS CONFIGURED BY SCSU.
H22:
<xxxxxx> THE ACKST PARAMETER IS ONLY VALID FOR SLMA STATIONS.
SPECIFIED VALUES ARE IGNORED.
H23:
<xxxxxx> THIS STATION IS ASSIGNED.
H24:
<xxxxxx> PARAMETER ACKST=TE NOT ACCEPTED BECAUSE STATION
IS ASSIGNED IN A NIGHT OPTION.
H25:
<xxxxxx> THE STATION IS NOT ACTIVE ( STATION SIGNED OFF ).
H26:
<xxxxxx> PARAMETER DIAL: FOR VIRTUAL ANALOG STATIONS
(INS = SIGNOFF, FLOAT, ACLSTN) ONLY DIALING TYPE 'VAR' IS ALLOWED.
THE SPECIFIED DIALING TYPE < DTMF / DP > IS IGNORED.
THE ACTION IS PERFORMED WITH DIALING TYPE 'VAR'.
H28:
<xxxxxx> LIST OF ’FOREIGN’ STATION NUMBERS REDIRECTED BY AMO TGER TO THIS
STATION. THEY ARE NO LONGER AVAILABLE FOR THE LISTED NON VOICE
SERVICE(S).
--------+--------------------------------------------------------------
SERVICE | STATION NUMBER(S)
--------|--------------------------------------------------------------------
<ddd> |<zzzzzz>, <zzzzzz>, <zzzzzz>, <zzzzzz>, <zzzzzz>, <zzzzzz>, <zzzzzz>
--------+--------------------------------------------------------------------
H30:
<xxxxxx> FOR THIS DEVICE COMBINATION THE PARAMETER <param> IS NOT VALID.
THE PARAMETER HAS BEEN IGNORED.
H32:
<xxxxxx> WHEN THE LINE OPERATES WITH 12 KHZ OR 16 KHZ METERING PULSES
THE LINE LENGTH IS RESTRICTED TO 200 METERS.
H33:
<xxxxxx> FOR DVCFIG = ANATECM CHARGE PULSE DURATION AND PAUSE CAN BE CHANGED
BY AMO PTIME.
H34:
SLMAR-PEN'S ARE SKIPPED FOR AUTOMATIC PEN SEARCH
(ADD MORE THAN 1 STNO OR NO PEN IN COMMAND) FOR DVCFIG = ANATE, ANATE&...
H35:
<xxxxxx> TEXTSEL=<value> IS NOT EFFECTIVE BECAUSE THIS LANGUAGE
IS NOT INSTALLED IN CENTRAL PBX DATA (AMO ZAND, PARAMETER TEXTSEL).
H36:
<xxxxxx> TEXTSEL=<value> IS ONLY EFFECTIVE FOR DIGITE’S.
 THE PARAMETER IS IGNORED.
H37:
<xxxxxx> FOR SLMA BOARDS, ID CARD USERS, ACL SUPPORT STATIONS
AND SIGNED OFF STATIONS THE PARAMETER CCTIDX IS IGNORED
H38:
<xxxxxx> THE STATION IS NOT ACTIVE ( ACL SUPPORT STATION ).
H39:
<xxxxxx> DHPAR = MWLED IS A PEN-DEPENDANT PARAMETER WHICH IS IGNORED FOR
VIRTUAL STATIONS (SIGNED OFF, FLOATING, ACLSTN).
THE ACTION IS PERFORMED WITH DHPAR = LEDSIGN
H40:
<xxxxxx> STATION LOCKING OR DOWNLOADING NOT NECESSARY, PARAMETER OFFTYPE IS
IGNORED
H41:
<xxxxxx> DOWNLOADING OF PARAMETER <COFIDX/CCTIDX/PULSTYPE/PULSLEV/DHPAR/DIAL
/CMIND> TO THE BOARD IS INITIATED
H43:
<xxxxxx> AN OFF PREMISES STATION (CONN=OPST1) HAS BEEN CONFIGURED AT A
TMDNH BOARD (PEN=nn-nn-nnn-nnn).
H44:
<xxxxxx> FOR THE ENTERED DEVICE TYPE ONLY CONNECTION TYPE DIR IS ALLOWED.
THE ACTION IS PERFORMED WITH CONN=DIR.
H45:
<xxxxxx> THE AUTOMATIC PEN SEARCH FOR FREE PENS TAKES PLACE IN LTU SHELVES WITH
SOURCE-GROUP=1 (SEE AMO UCSU).
H46:
<xxxxxx> THE AMO IS STILL WAITING FOR A CONFIRMATION BY CALL PROCESSING
(MAX. 120 SEC)
H47:
<xxxxxx> THE CONTRACTED NUMBER OF FLEX+TDM LICENES IS EXCEEDED.
THE SUBSCRIBER HAS BEEN MARKED AS TRIAL ENTITY.
IT WILL BE BLOCKED, IF TRIAL MODE EXPIRES WITHOUT
SUFFICIENT LICENSES.
H48:
THE EXISTING DPLN OF THE STATION IS NOT IN ADPLN OF THE NEW NODE,
SO IT IS INTERNALLY SET TO THE DPLN OF THE NEW NODE
H49:
<xxxxxxxxxxxx> TEXTSEL=xxxxxxxx IS NOT EFFECTIVE BECAUSE THIS LANGUAGE
HAS NOT BEEN SET UP IN AP SPECIFIC DATA
(AMO UCSU, PARAMETER TEXTSEL)
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.