Languages/national character sets for displaying text for individual Access Points

This feature allows five languages to be configured individually for each Access Point. This can be carried out with AMO UCSU, Parameter TEXTSEL. The languages can either be the same as in the host system or may differ. Furthermore, the same languages can be configured for all Access Points/OpenScape 4000 SoftGates or different languages can be configured individually for each Access Point.

Since individual languages can be configured for Access Points/OpenScape 4000 SoftGates, the relevant national character sets (AMO UCSU, Parameter LANGID) can also be configured specifically per Access Point. Five character sets (the same for all host shelves) can also be configured for the host system (AMO ZAND, Parameter LANGID).

As with the host system (AMO ZAND, Parameter TEXTSEL), it is also the case for Access Points/OpenScape 4000 SoftGates that the first language configured with AMO UCSU, Parameter TEXTSEL, is taken as the default language for the relevant Access Point.

All terminals connected to the host system use the default language of the host system as the preferred language. Terminals connected to an Access Point use the default language of the corresponding Access Point/OpenScape 4000 SoftGate as the preferred language.

The preferred language of a terminal can also be changed individually with AMO SBCSU or SCSU. However, only the languages that are valid for the shelf (on which the terminal is configured) are possible.