= Advice of charge (10 digits)
(see AMO-TEXT)

= Output of the transmission speed as a text string (10 digits),
(see AMO-TEXT)
If the speed is not in defined in the text-table (AMO-TEXT), the speed will be output as number with 3 digits.
See table Meaning of numeric value for BAUD on page 1102.

= Applied type of billing (10 digits),
(see AMO-TEXT)

= Called party; number which was dialed by the calling party. (22 digits)
If the paying party is an attendant console, then AMO TLZO can be used to create a virtual subscriber; one must be created for a PBX tie trunk set.
If the length of the output field is shorter than the length of the station number, then the station number, will be cut. For this reason the parameter FLDALIGN will be used.
Is the length of the value to output longer than the field in the data record, then the output will be cut (left or right).

= Station ID of calling party (text parameter SUBSID will be assigned in AMO-TEXT) (1 digit)

= Output of the communication network as a text string (10 digits),
(see AMO-TEXT)

= Output of the type of connection as a text string (10 digits),
(see AMO-TEXT)

= Output of the costs (within value-added tax)
With calculation in 1/100-ths: max. 8 digits,
With calculation in 1/100000-ths: max. 12 digits

= Output of the nettocosts (without value added tax)
With calculation in 1/100-ths: max. 8 digits,
With calculation in 1/100000-ths: max. 12 digits

= Output of the connection type as a text string (10 digits),
(see AMO-TEXT)

= Output of the class of pin as a text string (10 digits),
(see AMO-TEXT)

= Station ID of new/connected party (text parameter SUBSID will be assigned in AMO-TEXT) (1 digit)

= New/connected party; New selected destination for a connection. (22 digits)
Infos about the right/left justified output field see description of item CALLEPTY on page 1091.

= Output of the expensive connections as a text string (10 digits),
(see AMO-TEXT)

= Node number of global id (3 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Subdomain number of global id (3 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Domain number of global id (2 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Leg id; If a targetuser may be changed with an existing connection, a new global id will be generated, the global id itself wouldn’t be changed. (8 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Node number of global call id (3 digits)
Use till HiPath 4000 V1.0
Table 18

= Subdomain number of global call id (3 digits)
Use till HiPath 4000 V1.0
Table 18

= Domain number of global call id (2 digits)
Use till HiPath 4000 V1.0
Table 18

= Global id; A new global id may be produced only, in case of a new connection. (8 digits)
Use till HiPath 4000 V1.0
Table 18

= Output of the station CDR chargees as a text string, only GET functionallity (10 digits),
(see AMO-TEXT)

= Type of information (10 digits)
If charging of the OFFICE, then units or amounts
(see AMO-TEXT)

= imaginary trunk number created of INTREAL (10 digits),
(see AMO FBTN)

= Length of the destination number (2 digits)
Use starting till HiPath 4000 V1.0
Table 18

= Node number of leg id (3 digits)
Use till HiPath 4000 V1.0
Table 18

= Subdomain number of leg id (3 digits)
Use till HiPath 4000 V1.0
Table 18

= Domain number of leg id (2 digits)
Use till HiPath 4000 V1.0
Table 18

= Output of the type of station CDR list type as a text string, only GET functionality (16 digits),
(see AMO-TEXT)

= Output of the network description as a text string (10 digits),
(see AMO-TEXT)

= Current date of the output name of the day (10 digits),
(see AMO-TEXT)

= Record type (no text will be assigned in AMO-TEXT) (1 digit)

= Output of the service as a text string, (10 digits),
(see AMO-TEXT)

= Indicates whether the output data record is correct / incorrect or double (10 digits),
(see AMO-TEXT)

= Output of the station ID as a text string (10 digits),
(see AMO-TEXT)

= Output of the supplement service as a text string (10 digits),
(see AMO-TEXT)

= Call phases (10 digits),
(see AMO-TEXT)

= Node number of thread call id (3 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Subdomain number of thread call id (3 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Domain number of thread call id (2 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Global call id; A new thread call id may be produced only, in case of a new connection. (8 digits)
Use starting from HiPath 4000 V1.0
Table 18

= Imaginary trunk number created of TKNOREAL (10 digits),
(see AMO-FBTN)

= Through connect / no through connect (10 digits),
(see AMO-TEXT)

= Output of deletion of the station CDR resettable counter after output , only GET functionallity (22 digits),
(see AMO-TEXT)

= Output of the distance zone as a text string (10 digits),
(see AMO-TEXT)