133.4.2 Advisories

 
H01:
THE LEADING DIGITS OF LDP ARE NOT DEFINED
 
[FOR DPLN <DPLN1>[,<DPLN2>[...]]]
 
[WITH CPS <CPS1>[,<CPS2>[...]]].
 
Cause:
 
The first field of the current LCR digit pattern does not find a digit analysis result in the digit analysis tables administered by AMO WABE (in any DPLN and CPS values displayed).
 
 
H02:
PARAMETER LAUTH IN DPLN <DPLN> WILL BE IGNORED BECAUSE THE LDP WILL BE RESTRICTED FOR THIS DPLN (LROUTE=0)
 
Cause:
 
An LROUTE is to be restricted. An LAUTH was assigned to this LROUTE, but will be ignored.
 
 
H03:
THE LEADING ROUTING DIGITS OF LDP LEAD
TO NONE OF THE DIGIT ANALYSIS RESULTS RELEVANT FOR LCR
 
[FOR DPLN <DPLN1>[,<DPLN2>[...]]]
 
[WITH CPS <CPS1>[,<CPS2>[...]]].
 
(AMO-WABE, DAR)
 
Cause:
 
The first field of the current digit pattern finds digit analysis results in the digit analysis tables, but they are not relevant for LCR.
 
 
H04:
NO MATCHING LCR DIALING PATTERN FOUND.
H05:
THE LEADING DIGITS OF LDP ARE ALREADY USED BY AMO RICHT AS ROUTING CODE FOR SERVICE=VOICE
 
[FOR DPLN <DPLN1>[,<DPLN2>[...]]]
 
[WITH CPS <CPS1>[,<CPS2>[...]]].
 
Cause:
 
The first field of the current digit pattern shows digit analysis results in the digit analysis tables, but they have already been used by AMO RICHT.
 
 
H07:
LDP HAS BEEN ADDED
 
[FOR DPLN <DPLN1>[,<DPLN2>[...]]]
 
[WITH CPS <CPS1>[,<CPS2>[...]]].
H08:
FOR CHANGE OF THE SPC THE PARAMETER DPLN IS NOT NECESSARY AND WILL BE IGNORED
 
Cause:
 
Parameters DPLN and SPC were specified. DPLN will be ignored because parameter SPC is independent of the digit analysis group number.
 
 
H09:
LDPNO <LDPNO> HAS BEEN CHANGED
 
[FOR DPLN <DPLN1>[,<DPLN2>[...]]]
 
[WITH CPS <CPS1>[,<CPS2>[...]]].
 
 
H10:
THERE IS NO LDP.
H11:
LDPNOS <LDPNOMIN>[ THROUGH <LDPNOMAX>] DO NOT EXIST.
 
Cause:
 
The value of parameter LDPNO is outside the range created.
 
 
H12:
LDPNO <LDPNO> HAS BEEN DELETED.
 
 
H13:
THE ACTUAL MAXIMAL LINEAR SEARCH LENGTH IS <LEN>.
 
 
H14:
THE LCR DIALPLAN CACHE HAS BEEN DELETED.
 
 
H15:
DIPLNUM @@@@ IS ALREADY ASSIGNED.
 
 
H16:
DIALPLAN IS ALREADY USED
 
 
H17:
STARTING FROM LWMPOOL @ AND DIALPLAN @@@,NO EMPTY DIAL PLAN IS FOUND FOR DIPLNUM @@@@.START SEARCHING FROM LWMPOOL 1 AND DIALPLAN 1.
 
 
H18:
DIPLNUM @@@@ IS NOT ASSIGNED
 
 
H19:
THE DIALING PLAN NUMBER @@@@ WAS ALLOCATED TO DIALING PLAN @@@ IN LCR-POOL @ .
H20:
DIPLNUM @@@@ IS ALLOCATED TO @@@ NUMBERING PLAN.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.