155.4 Error Messages and Advisories

155.4.1 Error Messages


F01:	INVALID PORT POSITION:'LTG' (LINE TRUNK GROUP) FOR 'PEN' OUT OF RANGE.
F02:	INVALID PORT POSITION:'LTU' (LINE TRUNK UNIT) FOR 'PEN' OUT OF RANGE.
F03:	INVALID PORT POSITION:'SLOT' (BOARD SLOT NUMBER) FOR 'PEN' INCORRECT.
F04:	INVALID PORT POSITION: 'CIRCUIT' (BOARD CIRCUIT NUMBER) FOR 'PEN' INCORRECT.
F05:	MEMORY RESERVED FOR SUBSCIBERS (NEEDED FOR THE CONFIGURATION OF ANNOUNCEMENT RECORDERS) IS INSUFFICIENT. ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND: ADD-DIMSU:STN=<?>;
F06:	NO DEVICE CONFIGURED. INCORRECT TYPE OF BOARD AT 'SLOT' OF 'PEN'.
F07:	BEFORE ACTIONS CHANGE/DELETE PLEASE DEACTIVATE THE RECORDER WITH THE FOLLOWING COMMAND: DEACT-DSSU:OFFTYPE=DI,TYPE=PEN,PEN1=<?>;
F09:	THE 'PEN' SPECIFIED IS ALREADY USED.
	(AMO @@@@@,PEN=@@-@@-@@@-@@@)
	(AMO @@@@@,STNO=@@@@@@)
F10:	NO PERIPHERAL MODULE CONFIGURED YET FOR THE 'SLOT' OF 'PEN'.
	(SEE AMO BCSU,MTYPE=PER)
F11:	NO FREE PORT FOR RECORDERS FOUND ON THE APPROPRIATE MODULES.
F12:	NO RECORDER CAN BE ATTACHED TO THE GIVEN 'SLOT' OF 'PEN'. BOARD MISSING OR OF INCORRECT TYPE: ONLY MODULES OF TYPE 'SLMA, SLMAB, SLMA3, SLMA24' ARE ALLOWED (SEE AMO BCSU, MTYPE=PER).
F13:	CANNOT CHANGE DATA - NO RECORDER CONFIGURED YET FOR PORT PEN=@@-@@-@@@-@@.
F15:	MEMORY RESERVED FOR LODEN VALUES (LOGICAL DEVICE TABLE NUMBERS FOR CALL PROCESSING) IS INSUFFICIENT. ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND: ADD-DIMSU:LODEN=<?>;
F16:	MEMORY RESERVED FOR DEVICE TABLE ENTRIES (DEVICE HANDLER) IS INSUFFICIENT. ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND: ADD-DIMSU:LTGNO=<?>,DTILTG=<?>;
F17:	MEMORY RESERVED FOR SUB-UNIT POOL (CALL PROCESSING) IS INSUFFICIENT. ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND: ADD-DIMSU:SU=<?>;
F18:	MEMORY RESERVED FOR DEVICE INDICATOR POOL (DEVICE HANDLER) IS INSUFFICIENT. ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND: ADD-DIMSU:LTGNO=<?>,DILTG=<?>;
F19:	THIS COMMAND INPUT DOES NOT INDUCE CHANGES IN CURRENT CONFIGURATION DATA.
F20:	THE 'PEN' SPECIFIED IS USED BY A DIFFERENT TYPE OF DEVICE (NOT AN ACD RECORDER).
F21:	CANNOT CHANGE DATA - NO RECORDER CONFIGURED YET FOR PORT PEN=@@-@@-@@@-@@. BOARD MISSING OR OF INCORRECT TYPE: ONLY MODULES OF TYPE 'SLMA, SLMAB, SLMA3, SLMA24' ARE ALLOWED (SEE AMO BCSU, MTYPE=PER).
F25:	MUSIC-ON-HOLD HMUSIC=@@@ HAS ALREADY BEEN ASSIGNED.
F26:	THE UPPER LIMIT FOR THE NUMBER OF RECORDERS IN THE SYSTEM HAS BEEN ATTAINED.
F27:	OPTYPE=RANDOM IS NOT ALLOWED TO BE SET WITH OPMODE=DEMAND.
F28:	OPTYPE=FIXED IS NOT ALLOWED TO BE SET WITH OPMODE=CONT.
F29:	FEATURE "FLEX+TDM" HAS BEEN ATTAINED. USE 'DISP-CODEW'
F34:	THERE IS NO RECORDER CONFIGURED FOR THE 'PEN' ENTERED.
F35:	THE UPPER LIMIT FOR THE NUMBER OF RECORDERS WITH THIS APPLICATION HAS BEEN ATTAINED.
F36:	ACD ANNOUNCEMENT RECNUM=@@@ HAS ALREADY BEEN CONFIGURED.
F37:	ACD MUSIC MUSNUM=@@ HAS ALREADY BEEN CONFIGURED.
F38:	THE RECORDED ANNOUNCEMENT LENGTH (LENGTH) ENTERED IS INCORRECT FOR OPTYPE=FIXED. POSSIBLE VALUES: 1,2,...,13,14,15,20,...,85,90.
F39:	THE RECORDED ANNOUNCEMENT LENGTH (LENGTH) ENTERED IS INCORRECT FOR OPTYPE=RANDOM. POSSIBLE VALUES: 1,2,...,15,16.
F40:	AN ACD RECORDED ANNOUNCEMENT WITH OPTYPE=FIXED MUST HAVE AN ANNOUNCEMENT LENGTH (LENGTH). POSSIBLE VALUES: 1,2,...,13,14,15,20,...,85,90.
F43:	CANNOT DELETE RECORDER - IT IS STILL REFERENCED BY DNI TABLES. (SEE AMO DNIT, TBL=DNI, AUDSRCID)
F44:	CANNOT DELETE RECORDER - IT IS STILL REFERENCED BY ACD ROUTING TABLES. (SEE AMO ACDRT, ACT=RTREC, ACT=RTMUS)
F45:	THE FIELDS 'OPMODE, OPTYPE, RECAPL, RECNUM, MUSNUM' CANNOT BE CHANGED - THE RECORDER IS STILL REFERENCED BY ACD ROUTING TABLES. (SEE AMO ACDRT, ACT=RTREC, ACT=RTMUS)
F46:	THE FIELDS 'OPMODE, OPTYPE, RECAPL, RECNUM' CANNOT BE CHANGED - THE RECORDER IS STILL REFERENCED BY DNI TABLES. (SEE AMO DNIT, TBL=DNI, AUDSRCID)
F47:	A MUSIC-ON-HOLD RECORDER (RECAPL=HMUSIC) MUST HAVE OPMODE=CONT AND OPTYPE=RANDOM.
F49:	A MUSIC RECORDER (RECAPL=ACDMUS) MUST HAVE OPMODE=CONT AND OPTYPE=RANDOM.
F50:	THE MODULE OF PORT PEN=@@-@@-@@@-@@ HAS BEEN DEACTIVATED.(SEE AMO BSSU)
F51:	RECORDER CANNOT BE CHANGED OR DELETED - IT IS STILL BEING ASSIGNED TO SUBSCRIBERS. (DISP-RCSU:RECAPL=HMUSIC,HMUSIC=@@@,REFRN=YES;)
F52:	THE CLASSMRK VALUES 'INIT' OR 'NONE' MAY NOT BE" CONCATENATED.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.