172.3.2 Parameter Description for Selection Tables

Note: The following rules apply to parameters with the possible values ’Y’ or ’N’:
’Y’ = A selection will be made (parameter specified as a selection criterion).
’N’ = A selection will not be made (not specified as a selection criterion).
Example:
Parameter CDCH=Y: Only data records with call charge units are output on the device.
Parameter CDCH=N: Data records both with and without call charge units are output (i.e. records are included in output selected according to other criteria).
 
ATNDGR
Attendant group number (see AMO VFGR)
 
Type of Input
:
Single value, chained single values, ranges, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 15
 
 
 
 
 
CARRIER
Number of Carrier
 
 
 
Single value, 5 chained single values, ranges, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 9
 
 
Default Value
:
0&&9
 
 
 
 
 
 
CDBAD
Output of faulty (bad) call detail records
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(not specified as a selection criterion)
 
 
 
 
Output of call data records with or without errors.
 
 
 
Y
Only bad data records are output.
 
 
 
 
 
CDCHU
Call detail records output with appropriate call charge units
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(not specified as selection criterion).
 
 
 
 
Call detail records with and without call charge units are output in this table.
 
 
 
Y
Only call charge data records with call charge units are output.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CDRAC
Call detail recording at ATND (user/ attendant call setup)
 
 
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
ATND
Output of call detail records marked with the CDRACA code for attendant setup via the CDRAC key at the attendant console). This code marks an entire call, even in the case of call transfer and call pickup.
 
 
 
N
All calls, including CDRACS and CDRACA calls, are output.
 
 
 
STN
Output of call detail records marked with CDRACS code for station setup.
 
 
 
 
 
CDRC
Output of details for stations with central CDR authorization
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
Only calls with CDRC are output.
 
 
 
N
(not specified as a selection criterion).
 
 
 
 
 
CDRCD
Virtual route code; indication of call type
 
Type of Input
:
Single value, chained single values, ranges, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
max. of 6 positions
 
 
 
 
 
 
 
With the AMO-RCUT the actual, selected routing code (max. 6 digits) can be converted into a virtual (6 digits) routing code. If the entry is missing in the RCUT table, the actual, selected routing code is output.
 
 
 
 
 
CDRSTA
Output of details for stations with station CDR authorization, only
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
Only calls with CDRSTA are output.
 
 
 
N
(not specified as a selection criterion).
 
 
 
 
 
CDRULT
Call charge unit limit value
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 4095
 
 
 
 
This limit value is less than the call charge limit value for a call transfer (see AMO GRZW).
 
 
 
If CDRULTE=N, enter 0000.
 
 
 
 
 
CDRULTE
Output of call details where call charge unit limit value exceeded
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
No call charge limit value in the selection table.
 
 
 
Y
Only those data records that exceed the call charge limit value are output, as specified in AMO-GRZW.
 
 
 
 
 
 
 
 
 
 
CONNT
Output of calls which exceed the connection time limit
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
= No call time limit value in the selection table (CONNTL = 000000).
 
 
 
Y
= Only those data records that exceed the time limit value are output, as specified in AMO-GRZW.
 
 
 
 
 
CONNTL
Connection time limit
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
6 positions
 
 
 
 
Specified in HRS./MINS./SECS.
 
 
 
This limit value is also less than the call time limit value for a call transfer (see AMO-GRZW).
 
 
 
If CONNT=N, enter 000000.
 
 
 
 
 
CONNTYP
Connection type
 
Type of Input
:
Single value, 5 chained single values with &
 
 
 
optional (ADD, CHANGE)
 
Possible Values
:
INT
: Output only of internal connections
 
 
 
INCO
: Output only of incoming connections
 
 
 
OUTG
: Output only of outgoing connections
 
 
 
LOAD
: Output of processor load
 
 
 
ACACT
: Output of events of attendant console (AC)
 
 
 
ALL
: Output of all connections
 
Default Value
:
ALL
 
 
 
 
 
 
COPIN
Class of PIN
 
Type of Input
:
Single value, 4 chained single values, ranges
 
 
 
required (ADD),
 
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 15
 
Default Value
:
0&&15
 
 
 
 
 
 
CTYPE
Connection type
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
ALL
Output of all call types
 
 
 
LOCAL
Local call
 
 
 
TOLL
Toll Call
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
DESTCNT
Number of digits to which the called (called party) and the connected (connected party) number is reduced for output.
 
Type of Input
:
Single value
 
Possible Values
:
A0 - A22
Number of digits of the external destination number to be included starting with the first position.
 
 
 
L0 - L22
Number of digits of the external destination number to be included starting with the last position.
 
Example
:
DESTCNT=A5
Dialed destination number: 0897221
Output destination number: 08972
 
 
 
DESTCNT=L5
Dialed destination number: 0897221
Output destination number: 08
 
 
DNOTBL1
Party bearing call charges is member of destination table 1.
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(not specified as a selection criterion).
 
 
 
Y
Call detail records may be selected for output with this criterion only if the dialed (external) call number, either in its entirety or in part, corresponds to a call number or part call number entered in the destination table.
 
 
 
 
If the output format specified in the selection table is NOFORM, then these call detail records are masked out, i.e. not output.
 
Example
:
 
 
 
Table entry
:
001234
 
 
dialed digits
:
001234
Included yes
 
 
 
00123
Included no
 
 
 
0012345
Included yes
 
 
 
0012345
Included no
 
 
 
 
 
DNOTBL2
Party bearing call charges is member of destination table 2.
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
 
 
 
 
N
 
 
 
 
 
 
 
See DNOTBL1
 
 
 
 
 
 
 
 
 
The external destination numbers are entered in the destination tables 1 and 2 by means of AMO-SELL.
 
 
 
 
 
EXPENS
Output of expensive connections
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
Output of expensive connections .
 
 
 
N
Output of all connections
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
FORMBAS
Format of base output device
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
ATTEND
Display on attendant console, preset format. (With AMO DAVF, the comma positions and currency units can be changed).
 
 
 
CDRSFORM
CDRS format, cdr per chargee
 
 
 
FORM01 to
FORM16
See format structuring, AMO-FTBL
 
 
 
HDFORM
HD format
 
 
 
NOFORM
No format
 
 
 
 
 
FORMRES
Format of reserve output device
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
see FORMBAS
 
 
 
 
 
 
LEVEL0
Node number
 
Type of Input
:
Single value,10 chained single values, ranges, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 999
 
Default value
:
0 && 999
 
 
 
 
 
 
LEVEL1
Subdomain number
 
Type of Input
:
Single value,10 chained single values, ranges, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 254
 
Default value
:
0 && 254
 
 
 
 
 
 
LEVEL2
Domain number
 
Type of Input
:
Single value,10 chained single values, ranges, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
0 - 30
 
Default value
:
0 && 30
 
 
 
 
 
 
NSTAT
Night status
 
 
 
 
Type of Input
:
Single Value,
required
 
Possible Values
:
Y, N
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
PAYPARTY
Party bearing call charges
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
ALL
Output of all calls
 
 
 
ATND
Attendant console
 
 
 
MTLC
PBX tie line limit
 
 
 
NIGHT
Output of all call types
 
 
 
 
 
 
If only calls from stations (STN) are to be output, one selection table must be created for each of the paying parties ATND, MTLC, and NIGHT in the selection group. PAYPARTY=ALL must be entered in the following selection table.
 
 
 
 
 
 
Reason: Code for STN is missing.
 
Calls with the codes MTLC, ATND, and NIGHT must be output or masked out previously
 
(NOFORM for FORMAT).
 
A virtual attendant console number can be entered for the attendant console using AMO-TLZO.
 
A virtual line number (paying party) must be entered for the PBX (MTLC) using AMO-TLZO.
 
 
 
 
PCODE
Personal code number
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(Not specified as a selection criterion)
 
 
 
 
Call detail records other than PCODE records are also output.
 
 
 
Y
Only data records with PCODE are output.
 
 
 
 
PPCF
Paying party is member of customer file
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(not specified as a selection criterion)
 
 
 
Y
The paying party must be a member of the customer master file (add member with AMO-KDEV), in order to output call detail records with this criterion.
 
 
 
 
 
RECTYP
Record is relevant for CDR / PM / CDR&PM
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
ALL
CDR and PM records are output.
 
 
 
CDR
Only CDR records are output.
 
 
 
PM
Only PM records are output.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION
Call section output (e.g. up to call change or time limit).
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(not specified as a selection criterion)
 
 
 
 
Output of call detail records with or without ’call detail section’ mark.
 
 
 
Y
Only those calls marked as ’call detail sections’ (attainment of the limits for CONNTL or CDRULT) are output. See AMO-GRZW
 
 
 
 
 
SELTABNO
Selection table number
 
Type of Input
:
Single value,
 
 
 
required (ADD, CHANGE)
 
 
 
optional (DELETE, DISPLAY, REGENERATE)
 
Possible Values
:
1 - 8
 
 
 
 
 
SERVICE
Commmunication service
 
Type of Input
:
Single value, chained single values, area
 
 
 
addresses required (ADD)
 
 
 
optional (CHANGE)
 
Possible Values
:
DTE
Data terminal equipment, analog and all other speeds
 
 
 
FAX
Telefax
 
 
 
VOICE
Voice connection, analog
 
 
 
 
 
SFSETUP
Connection via S&F setup (Store and Forward)
 
Type of Input
:
Single value, required (ADD);
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
 
 
 
 
N
 
 
 
 
 
STATAB1
Paying party is member of station table 1
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
N
(not specified as a selection criterion)
 
 
 
Y
The paying party must be included in station table 1 (must be created with AMO-SELL), if this selection criterion is specified. If the output format in the selection table is NOFORM, then these call detail records will not be output (masking out of call detail records of specific stations).
 
 
 
 
 
STATAB2
Paying party is member of station table 2
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
Y, N
 
 
 
 
 
 
 
See STATAB1
 
 
 
 
 
 
 
 
 
If STATAB1 and STATAB2 have the value ’Y’, the paying parties must be entered in subscriber tables 1 or 2 in order to either obtain a printout or mask out the data record.
TARIF
Tariff used for call charge calculation
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
NOCALC
No call charge calculation
 
 
 
 
(However, if the output device is an attendant console, the call charge units are output).
 
 
 
TARGR00
Tariff Group Table 0
 
 
 
TARGR01
Tariff Group Table 1
 
 
 
TARGR02
Tariff Group Table 2
 
 
 
TARGR03
Tariff Group Table 3
 
 
 
TARGR04
Tariff Group Table 4
 
 
 
TARGR05
Tariff Group Table 5
 
 
 
 
 
 
For call charge calculations the tariff group tables (0 to 5) must be created by means of AMO-TTBL.
 
In addition, the holiday tables and the tariff period tables must be created with the AMOs FETA and TABT respectively.
 
If CDRAC is specified, and TARIF=NOCALC, then the call charge units are still displayed at the attendant console.
 
 
 
 
THRGCON
Output of call detail records with sign through connect’
 
Type of Input
:
Single value, required (ADD),
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
Only connections with state ’THROUGH CONNECT’
 
 
 
N
All connections
 
 
 
 
TIELINE
Tieline
 
Type of Input
:
Single value,
 
 
 
optional (ADD)
 
 
 
optional (CHANGE)
 
Possible Values
:
Y
With tieline
 
 
 
N
Without tieline
 
Default Value
:
N
 
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.