Section 8.9.2. Generation

8.9.2. Generation

The FWD COUNTER in AMO ZAND is used to configure the maximum number of call forwardings.

Activate the feature
```
CHA-FEASU:TYPE=A,CM=HTNW;
```

Configure a hunting group with call forwarding

ADD-SA:TYPE=VCE,CD=<hunting group station 
number>,STNO=<station numbers of hunting group 
station>,STYPE=<(LIN or CYC)>,LVAFTEXT=Y,EXECCFW=Y;

Configure a hunting group in which call diversion is not allowed, but in which network-wide stations in the hunting group can be reached
```
ADD-SA:TYPE=VCE,CD=<hunting group station 
number>,STNO=<station numbers of hunting group 
stations>,STYPE=<(LIN or CYC)>,EXECCFW=Y;LVAFTEXT=N,
```

Configure the maximum number of call forwardings

CHA-ZAND:TYPE=ALLDATA2,FWDMAX=<number of call forwardings>;

Configure call forwarding

ADD-ZIEL:TYPE=FWD,SRCNO=<forwarding 
party>,SI=VOICE,DESTNOF=forwarding destination;

Activate call forwarding
```
ADD-ACTDA:TYPE=STN,STNO=<forwarding 
party>,FEATCD=FWD,SIFWD=VOICE;
```
The number of a hunting group's overflow destinations has been increased. Now an internal VMS (in the local PABX), a network-wide VMS, a PhoneMail server, and a station number (optionally in the local PABX, in a network PABX, or in the CO) is allowed. Overflow to the servers is performed whether or not the FWD COUNTER in AMO ZAND is reached. The FWD COUNTER limits the overflow to the station number.
Configure a hunting group with overflow
```
ADD-SA:TYPE=VCE,CD=<hunting group station 
number>,STNO=<station numbers of hunting group 
stations>,STYPE=<(LIN or CYC)>,OVFLDEST=<(PHONMAIL,VMSNW, 
DESTEXT,NONE)>,NUMBER=<station number>; 
```
The overflow destination can be reached after a call has spent a cycle in the hunting group. The OVFLCYCL parameter is set to Y for this.
Configure a hunting group with overflow and overflow after one cycle
```
ADD-SA:TYPE=VCE,CD=<hunting group station 
number>,STNO=<station numbers of hunting group 
stations>,STYPE=<(LIN or 
CYC)>,OVFLCYCL=Y,OVFLDEST=<(PHONMAIL,VMSNW,VMSINT,DESTEXT,NON
E)>,NUMBER=<station number>;
```
Configure a pool for detecting free or busy stations
```
ADD-DIMSU:TYPE=USER,HGMEMB=<number of configured hunting group 
stations>;
```
If the LVAFTEXT parameter in the AMO SA is set to N, you must also configure a pool in all systems that feature a network-wide hunting group station.

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.