5.18.3.5. Acknowledged Identification Request (HUNGARY) 
When there is an identification request (Hungary) with MFC-R2, first
a signal is received that indicates whether the identification is valid
or possible (acknowledge). This signal should not be sent on to the CP.
- Load the MFC Table 15 for Hungary (central office) with the following AMO command on MFC version x. The tables already have the correct basic initialization, so that the following MFCTA command to assign the parameters is not necessary. COPY-MFCTA: 15, x;
- You can control the feature described above with the MFC parameter
CHKIDDGT:
CHANGE-MFCTA: MFCVAR=x, TYPE=MFCVAR, OPT=MISC, PAR=CHKIDDGT.
IMPORTANT:
In a concrete case, you must repeat and chain all parameters that have already been set with '&'. The above example only sets the parameter CHKIDDGT.