5.18.3.6. Handling the Signals in Generated Connections 
Use the table (TYPE=TBLF,OPT=DIALOUT) in MFCTA to assign the dialed
digits to any MFC signals that you choose. This table converts the dialed
0 to the MFC signal 10. This installation of this table is correct for
most applications. It assigns all characters of a 16-key keyboard to
an MFC signal.
- Changing the MFC tables to assign the MFC signal I-15 to the digit #
(11).
CHANGE-MFCTA: MFCVAR=x, TYPE=TBLF, OPT=DIALOUT, PHYSIG=11, SIGNAL=15, INFO=END;