188.4.2 Advisories


H01:	NO ENTRY FOR SPECIFIED PARAMETERS.
H02:	AT STNO <place>: <funct> KEY DELETED FROM FORMER POSITION.
H02:	<funct> KEY DELETED FROM FORMER POSITION.
H03:	FUNCTION KEY LAYOUT CHANGED FOR STATION <stno>.
H04:	STANDARD <std> CHANGED FOR <digtyp>.
H05:	STANDARD <std> LOADED AT STATION <stno>.
H06:	STN <stn> ACTIVATED.
H07:	THE STANDARD STDNO <std> WAS ALLOCATED DIGTYP <digtyp>. THIS DIGTYP WAS OVERWRITTEN WITH DIGTYP <digtyp>.
	(AT DIGTYPES OF OPTIT3, OPTIT8, OPTIT12 AND OPTIT19 THE STNO MUST NOT BE IDENTICAL !)
H08:	SERVICE INFO CAN NOT BE SPECIFIED FOR STATIONS. PARAMETER INFO IGNORED.
H09:	THE SERVICE INFO: " " MAY BE UPDATED. (CHANGE-TAPRO:STD=<std>,DIGTYP=<digtyp>,INFO= )
H10:	No MATCHING PATTERN FOUND IN INFO FIELDS.
H11:	DISPLAY WITH FORMAT=S FOR DIGTYP=STDDEV NOT POSSIBLE.
H12:	MIN 1 KEY FUNCTION <funct> HAS TO BE EXIST FOR SECRETARY TEAMMEMBER.
H13:	STN <tln> IS <A/NO> TEAMMEMBER (AMO SDAT, TEAMEXEC/TEAMSECR). THE ADDITIONAL DSSNA MEMORY FOR KEY FUNCTION <funct> (KEY <N>) WAS DELETED.
H14:	STN <tln> IS A TEAMMEMBER (AMO SDAT, TEAMEXEC/TEAMSECR). THE ADDITIONAL DSSNA MEMORY FOR KEY FUNCTION <funct> (KEY <N>) WAS ADDED.
H15:	THE KEY FUNCTIONS BUSYLAMP AND DOOROPEN CAN ONLY BE SET ALTERNATIVELY. AT STNO <tln>: <funct> KEY DELETED.
H16:	<tln> DEFAULT VALUE SLKTYPE=SLKSTNO HAS BEEN SET FOR ANY PUS RESP. RNGXFER KEY. AND CAN BE MODIFED BY CHANGE-CHESE:GRNO=<number>,TYPE=EXECSLK,... RESP.
H17:	<tln><bis><tln2>DEFAULT VALUE SLKTYPE=SLKSTNO HAS BEEN SET FOR ANY PUS AND RNGXFER KEY.AND CAN BE MODIFIED BY CHANGE-CHESE:GRNO=^zahl^,TYPE=SECRSLK,..."
H18:	FIXED FUNCTIONS CANNOT BE OVERWRITTEN AND FUNCTIONS ON FIXED KEYS CANNOT BE ASSIGNED TO ANOTHER KEY. CHANGES WHICH CONTRADICT THESE RULES COULD NOT BE PERFORMED.
H19:	STD OF STATION ^tln^ IS CHANGED FROM NON-OPENSTAGE/DPIP, DPCP TO OPENSTAGE/DPIP/DPCP KEY LAYOUT. SO, THE INVALID NAME ENTRIES (DEFINED AT LEVEL 3,4 AND/OR ADD-ON 3,4) IN AMO-ZIEL ARE DELETED.
H20:	CHANGE OF KEY 17 AND 18 ONLY TAKES PLACE IF PLUGGED ADD-ON IS LOW-COST ADD-ON.
H21:	STD OF STATION ^tln^ IS CHANGED FROM OPENSTAGE/DPIP/DPCP TO NON-OPENSTAGE/DPIP KEY LAYOUT.
H22:	SHIFT-KEY HAS NO FUNCTION IN CASE A LOW-COST ADD-ON IS USED
H23:	THE ENTERED KEY MODULE IS NOT SUPPORTED FOR THIS LAYOUT TYPE, MODIFIED KEY WILL NOT BE FUNCTIONAL.

Variables in the Error Messages and Advisories

<place> : AT STNO <stno>
nothing

<funct> : one of the key function names will be output at this point.
Refer to the description of the KYxx parameters.

<stno> : one or more station numbers, or a station number range.
<x> : a given number

<devtyp> : TCLOG-SUBSCRIBER (AMO SSCSU)

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.