CGWB - Configuration of Global-and Feature-Board Data for HG3500 Board

AMO CGWB configures the board configuration data of HG3500 CGW boards.
Board data consists of :

Board specific global data
Expanded Global Data which consist of:

Global Board Data
Ethernet interface Data
Service interface Data
Sector number of an IPDA-gateway
DMC specific data
Primary and Secondary Gatekeeper
H.235 Security Data
Gateway Data
Large Enterprise Gate Keeper Data
SIP Trunking Data for SSA

Feature Data Box which consist of:

IP Routing tables (set by AMO APRT)
Audio Stream Control (ASC) configuration data
DSP configuration data
Management Station and Back-Up Server
WBM Login Data
SIP Trunking Data for ERH

The configuration data has to be downloaded first, then CGW board uses the configured data.
Board data may be downloaded by means of:

Plug into LTU-Shelf
Switch on / restart by means of AMO BSSU / AMO USSU

Dynamic loading of board data during operation will be done for features ASC, DSP, SIPERH, MGNTDATA and WBMDATA after changing successfully.

Gatekeeper IDs(GWID1/2 and PRIGKID1/2 or SECGKID1/2) are checked during registration only. GWID1(TYP=GWDATA) is verified with PRIGKID1 (TYP=GKDATA) or SECGKID1 (TYP=GKDATA) .Name-strings for these 3 IDs are handled case-sensitive, and must be entered in identical characters. Verification is also done for the 2.Part of the IDs. Specifying '*****' (five stars) resets the according parameters to empty string level.

PIT response is timer controlled. For unsuccessful loading of board data an error message will be issued and the AMO CGWB will be aborted. Loading may be unsuccessful for the following reasons:

No board data have been configured
Board not present
No response of PIT received within 2 minutes
Dynamic board id not present
Board not in state 'ready'

Cross Reference to Other AMOs:

AMO DIMSU	Dimensioning of features, switching unit
AMO BFDAT	Block function data configuration
AMO BCSU	Configuration of CGW-board
AMO SBCSU	Configuration of the IP Phones at CGW board
AMO BSSU	Initiating downloading of CGW board data
AMO BPOOL	Assignment of boards to a Reconfiguration Pool
AMO APRT	Configuration of Routing tables of CGW-board

Generation sequence:

 DIMSU --> SIPCO --> BFDAT --> BCSU --> CGWB                      for configuration of CGW board data
 DIMSU --> SIPCO --> BFDAT --> BCSU --> CGWB --> BPOOL            for Standby CGW boards
 DIMSU --> SIPCO --> BFDAT --> BCSU --> CGWB --> SBCSU            CGW boards with IP terminals
                                                       without automatic switchover
 DIMSU --> SIPCO --> BFDAT --> BCSU --> CGWB --> BPOOL --> SBCSU  for CGW boards with IP terminals
                                                       and automatic switchover

Destination Processor: BP (Switching Unit)

Functions

ADD	Add CGW (HG3500) board	password class 2
CHANGE	Change CGW (HG3500) board data	password class 2
DISPLAY	Display CGW (HG3500) board data	password class 1
REGENERATE	Regenerate CGW (HG3500) board data	password class 1

Procedure Overview

ADD-CGWB

ADD-CGWB	LTU=<number>, SLOT=<number>,
		SMODE=NORMAL,IPADR=<number>, NETMASK=<number>, [PATTERN=<number>], [VLAN=<param>], [VLANID=<number>], [DEFRT=<number>], [TCPP=<number>], [BITRATE=<string>], [TRPRSIP=<number>], [TRPRSIPQ=<number>], [TRPRH323=<number>], [TPRH323A=<number>], [TLSP=<number>], [DNSIPADR=<number>], [DNSIPAD2=<number>], [USEWANIF=<param>], [SIPTCPP=<number>], [SIPTLSP=<number>], [ABOUT=<string>];
		SMODE=STBYRDY,[IPADR=<number>], [NETMASK=<number>], [VLAN=<param>], [VLANID=<number>], [DEFRT=<number>];
		SMODE=STBYDEF,[IPADR=<number>], [NETMASK=<number>], [VLAN=<param>], [VLANID=<number>], [DEFRT=<number>];

Using the ADD branch all settings are performed which are necessary for normal operation of CGW board.

Within this branch two kind of data are configurable: Global Data and Ethernet Interface Data. This kind of data are only downloaded to the board if the board is brought into service (switching off/on or restart the board by AMO BSSU).

So called 'Feature Data Boxes', i.e. the data types

ASC
DSP
MGNTDATA
WBMDATA
SIPERH
DLSACPAS from DLSDATA

which are downloadable to the board during operation (see also EXEC command), are not configurable using the ADD command. This kind of data and additionally

GKDATA
DMCDATA
H235DATA
GWDATA
LEGKDATA
SIPSSA
DLSIPADR and DLSPORT from DLSDATA

are initialized with default values by the ADD command and can be modified only by a subsequent CHANGE command.

Default value '0' for parameters

PRIGKPN
SECGKPN
MGNTPN
BUSPN

means 'undefined port number'.

After the ADD command has been successfully executed, the board data segment is marked valid (for LW and AMO).

The configurable IP addresses must fulfil the following requirements:

IP addresses IPADR and NETMASK must be configured to values different than 0.0.0.0
The NETMASK must have, from binary point of view, only 1's on the left hand side of an arbitrary boundary and contain only 0's on the right hand side of the same boundary. That means alterate 0 and 1 sequences (e.g.1101) are not allowed. The boundary devides the IP address into the network part and the host part.
The parameter IPADDR describes the IP address of the own CGW board at the Ethernet LAN segment.
The IP address is devided into 2 parts by a boundary which is determined by NETMASK: Net Address and Host Address.
The Net Address of all IP addresses located at the same LAN segment must be identical, i.e. the Net Address describes the address of the LAN-Segment and the Host Addresses must differ within the segment.
The Default Router DEFRT is addressed if a data packet has to leave the own LAN segment in order to reach the destination (DEFRT sometimes is also named 'Next Router' or 'Next Gateway').
The Default Router must contain the same Net Address as IPADDR.

The Idle Pattern must be configured according to system Law configuration (CHA-ZAND:TYPE=CONFC,CODE=alaw/ulaw) to prevent payload problems. In case of A-Law the idle code 213 has to be configured, in case of U-Law the proper value is 255.

CHANGE-CGWB

CHANGE-CGWB

MTYPE=CGW,LTU=<number>, SLOT=<number>,

TYPE=ASC, {(min 1) UDPPRTLO=<number>, UDPPRTHI=<number>, TOSPL=<string>, TOSSIGNL=<string>, T38FAX=<param>, RFCFMOIP=<param>, RFCDTMF=<param>, REDRFCTN=<param>,

[PRIO=PRIO1],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO2],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO3],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO4],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO5],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO6],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO7],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO8],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

[PRIO=PRIO9],[CODEC=<param>], [VAD=<param>], [RTP=<string>];

TYPE=STBYDATA,[IPADR=<number>], [NETMASK=<number>], [VLAN=<param>], [VLANID=<number>], [DEFRT=<number>];

TYPE=DMCDATA,[DMCCONN=<number>], [SMP=<param>], [SMP4OSV=<param>];

TYPE=DSP,[JITBUFD=<string>];

TYPE=GKDATA, {(min 1) PRIGKIP=<number>, PRIGKPN=<number>, PRIGKID1=<string>, PRIGKID2=<string>, SECGKIP=<number>, SECGKPN=<number>, SECGKID1=<string>, SECGKID2=<string>, TIMTLIVE=<number>};

TYPE=GLOBIF, {(min 1) IPADR=<number>, NETMASK=<number>, PATTERN=<number>, VLAN=<param>, VLANID=<number>, DEFRT=<number>, TCPP=<number>, BITRATE=<string>, TRPRSIP=<number>, TRPRSIPQ=<number>, TRPRH323=<number>, TPRH323A=<number>, TLSP=<number>, DNSIPADR=<number>, DNSIPAD2=<number>, USEWANIF=<param>, WPUBIP=<number>, SIPTCPP=<number>, SIPTLSP=<number>, ABOUT=<string>};

TYPE=GWDATA, {(min 1) GWID1=<string>, GWID2=<string>};

TYPE=GWSECTOR,GWSECTNO=<number>;

TYPE=H235DATA, {(min 1) SECSUBS=<param>, SECTRNK=<param>, GLOBID1=<string>, GLOBID2=<string>, TIMEWIN=<number>, GLOBPW=<number>};

TYPE=LEGKDATA, {(min 1) GWNO=<number>, GWDIRNO=<number>}, [REGEXTGK=<param>];

TYPE=MGNTDATA, {(min 1) MGNTIP=<number>, MGNTPN=<number>, BUSIP=<number>, BUSPN=<number>, UIMODE=<param>};

TYPE=SERVIF, {(min 1) LOGINTRM=<string>, PASSW=<string>};

TYPE=SIPTRERH,[GWAUTREQ=<param>], [GWSECRET=<string>], [GWUSERID=<string>], [GWREALM=<string>];

TYPE=SIPTRSSA, {(min 1) SIPREG=<param>, REGIP1=<number>, PORTTCP1=<number>, PORTTLS1=<number>, REGTIME=<number>, REGIP2=<number>, PORTTCP2=<number>, PORTTLS2=<number>};

TYPE=WBMDATA,LOGINWBM=<string>, {(min 1) PASSWWBM=<number>, ROLE=<param>};

TYPE=DLSDATA, {(min 1) DLSIPADR=<number>, DLSPORT=<number>, DLSACPAS=<param>};

TYPE=JB, {(min 1) AVGDLYV=<number>, MAXDLYV=<number>, MINDLYV=<number>, PACKLOSS=<number>, AVGDLYD=<number>, MAXDLYD=<number>, JBMODE=<number>};

TYPE=IPCONF, {(min 1) IPMODE=<param>, DHCPV4=<param>, DHCPV6=<param>};

TYPE=IPV6IF, {(min 1) IPADRV6=<string>, PREFIXV6=<number>, DEFRTV6=<string>, DNSIPV6=<string>, DNS2IPV6=<string>};

TYPE=MANLANIF, {(min 1) MIPADR=<number>, MNETMASK=<number>, MVLAN=<param>, MVLANID=<number>, MDEFRT=<number>};

MTYPE=INITCGW,LTU=<number>, SLOT=<number>,

TYPE=ASC;

TYPE=DMCDATA;

TYPE=STBYDATA;

TYPE=DSP;

TYPE=GKDATA,[GKTYPE=<param>];

TYPE=GLOBIF;

TYPE=GWDATA;

TYPE=GWSECTOR;

TYPE=H235DATA;

TYPE=MGNTDATA;

TYPE=SIPTRERH;

TYPE=SIPTRSSA;

TYPE=WBMDATA,[LOGINWBM=<string>];

TYPE=DLSDATA;

TYPE=JB;

TYPE=IPCONF;

TYPE=IPV6IF;

TYPE=MANLANIF;

TYPE=ALL;

DISPLAY-CGWB

DISPLAY-CGWB	[LTU=<number>], [SLOT=<number>],
		[TYPE=ASC];
		[TYPE=DMCDATA];
		[TYPE=DSP];
		[TYPE=GLOBIF];
		[TYPE=GKDATA];
		[TYPE=GWDATA];
		[TYPE=GWSECTOR];
		[TYPE=H235DATA];
		[TYPE=LEGKDATA];
		[TYPE=MGNTDATA];
		[TYPE=SERVIF];
		[TYPE=SIPTRERH];
		[TYPE=SIPTRSSA];
		[TYPE=WBMDATA];
		[TYPE=DLSDATA];
		[TYPE=JB];
		[TYPE=IPCONF];
		[TYPE=IPV6IF];
		[TYPE=MANLANIF];

REGENERATE-CGWB

REGENERATE-CGWB

[LTU=<number>], [SLOT=<number>], [TYPE=<param>];

Parameter description

ABOUT	Info about board
	Type of Input:	single value, 20. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	text (case sensitive), up to 45 characters

AVGDLYD	Average Delay Data
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	numeric, 0-200
	Default Value:	CHANGE for MTYPE=INITCGW: 60

AVGDLYV	Average Delay Voice
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	numeric, 0-218
	Default Value:	CHANGE for MTYPE=INITCGW: 40

BITRATE	Ethernet Bit Rate Configuration, whether at Ethernet LAN side auto negotiation, 10 MBit/s or 100 MBit/s (Half or Full Duplex) is used
	Type of Input:	single value, 8. parameter of a min-1-group			(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
	Type of Input:	single value, optional			(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	100MBFD	100 Mbit/s Full Duplex	36
		100MBHD	100 Mbit/s Half Duplex	35
		10MBFD	10 Mbit/s Full Duplex(only STMI2)	34
		10MBHD	10 Mbit/s Half Duplex(only STMI2)	33
		AUTONEG	Auto Negotiation	0
	Default Value:	AUTONEG

BUSIP	IP Adress of the Back-Up Server
	Type of Input:	4 single values, concatenated with ., 3. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

BUSPN	Port Number of the Back-Up Server
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	numeric, 1-65535
	Default Value:	443

CODEC	Codec
	Type of Input:	single value, optional
	Possible Values:	G711A	G711 A-Law, uncompresed	DB_VC_G711
		G711U	G711 U-Law, uncompresed	DB_VC_G711U
		G722	G722, compressed	DB_VC_G722
		G723	G723, compressed	DB_VC_G723
		G729	G729, compressed	DB_VC_G729
		G729A	G729, compressed	DB_VC_G729A
		G729AB	G729, compressed	DB_VC_G729AB
		G729B	G729, compressed	DB_VC_G729B
		NONE	No Codec	DB_VC_NULL
		OPUS	OPUS, compressed	DB_VC_OPUS
	Default Value:	G711A&G723&G729&G729AB

DEFRT	IP address of the default router within the LAN segment The default router takes care of routing forward all packets with a destination address with a network part different from the own LAN segment. 0.0.0.0 means that no default router is configured.
	Type of Input:	4 single values, concatenated with ., 6. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		4 single values, concatenated with ., optional	(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=STBYDATA-Standby Data)
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0 (no Default Router)	(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)

DEFRTV6	IPV6 Address of the Default Router
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 39 characters
	Default Value:	::

DHCPV4	DHCP for IP V4
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

DHCPV6	DHCP for IP V6
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

DLSACPAS	PIN required for DLS Bootstrapping
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	value from AMO-ZANDE

DLSIPADR	DLS server IP address
	Type of Input:	4 single values, concatenated with ., 1. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	value from AMO-ZANDE

DLSPORT	Port Number of DLS server
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 0-65535
	Default Value:	value from AMO-ZANDE

DMCCONN	Number of DMC connections
	Type of Input:	single value, optional
	Possible Values:	numeric, 0-255
	Default Value:	0

DNS2IPV6	DNS IPV6 Address 2
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 39 characters
	Default Value:	::

DNSIPAD2	DNS IP Address 2
	Type of Input:	4 single values, concatenated with ., 15. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		4 single values, concatenated with ., optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 0-255
	Default Value:	value from ZANDE

DNSIPADR	DNS IP Address
	Type of Input:	4 single values, concatenated with ., 14. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		4 single values, concatenated with ., optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 0-255
	Default Value:	value from ZANDE

DNSIPV6	DNS IPV6 Address
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 39 characters
	Default Value:	::

GKTYPE	Gatekeeper Type
	Type of Input:	single value, optional
	Possible Values:	PRIGK	Primary Gatekeeper
		SECGK	Secondary Gatekeeper
		TIMTLIVE	Time To Live

GLOBID1	Global Identifier of the Gateway, 1.Part
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters

GLOBID2	Global Identifier of the Gateway, 2.Part
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters

GLOBPW	Encrypted Global Password of the Gateway
	Type of Input:	20 single values, concatenated with -, 6. parameter of a min-1-group
	Possible Values:	numeric, 0-255

GWAUTREQ	Digest authentication is required
	Type of Input:	single value, optional
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

GWDIRNO	gateway directory number
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, up to 22 characters

GWID1	ID of the Gateway, 1.Part
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters

GWID2	ID of the Gateway, 2.Part
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters

GWNO	Gateway Number
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	numeric, 1-9999
	Default Value:	0

GWREALM	Security Zone of the gateway
	Type of Input:	single value, optional
	Possible Values:	text (case sensitive), up to 20 characters

GWSECRET	Password of the gateway
	Type of Input:	single value, optional
	Possible Values:	text (case sensitive), up to 20 characters

GWSECTNO	Sector number of an IPDA
	Type of Input:	single value, mandatory
	Possible Values:	numeric, 0-2400

GWUSERID	User identification of the gateway
	Type of Input:	single value, optional
	Possible Values:	text (case sensitive), up to 20 characters

IPADR	Source IP address of CGW board
	Type of Input:	4 single values, concatenated with ., 1. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		4 single values, concatenated with ., mandatory	(ADD,SMODE=NORMAL-normal mode, no standby mode)
		4 single values, concatenated with ., optional	(ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=STBYDATA-Standby Data)
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0	(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)

IPADRV6	IPV6 Address of the LAN
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 39 characters
	Default Value:	::

IPMODE	IP Mode
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	DUALSTCK	IP Version 4 and Version 6	DB_IPM_IP_V4_V6
		IPV4	IP Version 4	DB_IPM_IP_V4
		IPV6	IP Version 6	DB_IPM_IP_V6
	Default Value:	IPV4

JBMODE	Jitter Buffer Mode
	Type of Input:	single value, 7. parameter of a min-1-group
	Possible Values:	numeric, 1-2
	Default Value:	CHANGE for MTYPE=INITCGW: 2

JITBUFD	Jitter buffer depth (msec)
	Type of Input:	single value, optional
	Possible Values:	0	0 ms / DF	0
		10	10 ms	1
		100	100 ms	10
		110	110 ms	11
		120	120 ms (JB size) / AF33 (TOS)	12
		130	130 ms	13
		140	140 ms	14
		150	150 ms	15
		160	160 ms	16
		170	170 ms	17
		180	180 ms	18
		190	190 ms	19
		20	20 ms	2
		200	200 ms	20
		210	210 ms	21
		30	30 ms	3
		40	40 ms (JB, RTP size) / AF11 (TOS)	4
		50	50 ms	5
		60	60 ms	6
		70	70 ms	7
		80	80 ms (JB, RTP size) / AF22 (TOS)	8
		90	90 ms	9
	Default Value:	CHANGE for MTYPE=INITCGW: 60

LOGINTRM	User Login for terminal mode
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	text, up to 10 characters
	Default Value:	HICOM

LOGINWBM	User Login for WBM Connection
	Type of Input:	single value, mandatory	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=WBMDATA-WBM Login Data)
		single value, optional	(CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board,TYPE=WBMDATA-WBM Login Data)
	Possible Values:	text, up to 11 characters

LTU	LTU Number: 1-15 in HHS (Host Shelf) or 17-99 in AP (Access Point) The possible LTU values depend on the systems architecture and can be found in the BCSU AMO description
	Type of Input:	0 to 2 single values, concatenated with &&, optional	(DISPLAY / REGENERATE)
		single value, mandatory	(ADD / CHANGE,MTYPE=CGW-Common Gateway Board / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
	Possible Values:	numeric, 0-15, 17-99	(CHANGE,MTYPE=CGW-Common Gateway Board)
		numeric, 1-15, 17-99	(ADD / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board / DISPLAY / REGENERATE)

MAXDLYD	Maximum Delay Data
	Type of Input:	single value, 6. parameter of a min-1-group
	Possible Values:	numeric, 40-250
	Default Value:	CHANGE for MTYPE=INITCGW: 200

MAXDLYV	Maximum Delay Voice
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 8-368
	Default Value:	CHANGE for MTYPE=INITCGW: 120

MDEFRT	IP address of the default router within the LAN segment The default router takes care of routing forward all packets with a destination address with a network part different from the own LAN segment. 0.0.0.0 means that no default router is configured.
	Type of Input:	4 single values, concatenated with ., 5. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0 (no Default Router)

MGNTIP	IP Adress of the Management Station
	Type of Input:	4 single values, concatenated with ., 1. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

MGNTPN	Port Number of the Management Station
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535
	Default Value:	8000

MINDLYV	Minimum Delay Voice
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	numeric, 0-48
	Default Value:	CHANGE for MTYPE=INITCGW: 20

MIPADR	Source IP address of CGW board
	Type of Input:	4 single values, concatenated with ., 1. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

MNETMASK	IP net mask of LAN segment The IP net mask determines the network and the host partition of an IP address. All IP addresses of a LAN segment must contain the identical network addresss part but different host address parts (also the Default Router must fulfill this requirement).
	Type of Input:	4 single values, concatenated with ., 2. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

MTYPE	Board type
	Type of Input:	single value, mandatory
	Possible Values:	CGW	Common Gateway Board
	Possible Values:	INITCGW	Initialize STMI2-IGW (HG3550-2/HG3540) Board

MVLAN	VLAN tagging on LAN-IF
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

MVLANID	Virtual LAN Identification Special settings are required by certain LAN equipment (routers...), in other cases the VLAN Id should be set to 0 (default)
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	numeric, 0-4095
	Default Value:	0

NETMASK	IP net mask of LAN segment The IP net mask determines the network and the host partition of an IP address. All IP addresses of a LAN segment must contain the identical network addresss part but different host address parts (also the Default Router must fulfill this requirement).
	Type of Input:	4 single values, concatenated with ., 2. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		4 single values, concatenated with ., mandatory	(ADD,SMODE=NORMAL-normal mode, no standby mode)
		4 single values, concatenated with ., optional	(ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=STBYDATA-Standby Data)
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0	(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)

PACKLOSS	Packet Loss Preference
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	numeric, 0-8
	Default Value:	CHANGE for MTYPE=INITCGW: 4

PASSW	Password
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 19 characters

PASSWWBM	Encrypted Password for WBM Connection
	Type of Input:	16 single values, concatenated with -, 1. parameter of a min-1-group
	Possible Values:	numeric, 0-255

PATTERN	Coding of idle pattern
	Type of Input:	single value, 3. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 213-255
	Default Value:	213 (H'D5)

PORTTCP1	Port number of the SIP registration via TCP/UDP
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535

PORTTCP2	Port number of the secondary SIP registration via TCP/UDP
	Type of Input:	single value, 7. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535

PORTTLS1	Port number of the SIP registration via TLS
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535

PORTTLS2	Port number of the secondary SIP registration via TLS
	Type of Input:	single value, 8. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535

PREFIXV6	IPV6 prefix length
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 0-128
	Default Value:	0

PRIGKID1	ID of the Primary Gatekeeper, 1.Part
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters
	Default Value:	PrimaryRASManagerID

PRIGKID2	ID of the Primary Gatekeeper, 2.Part
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters

PRIGKIP	IP Adress of the Primary Gatekeeper
	Type of Input:	4 single values, concatenated with ., 1. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

PRIGKPN	Port Number of the Primary Gatekeeper
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535
	Default Value:	1719

PRIO	Priority list for Codec settings
	Type of Input:	single value, 9. parameter of a min-1-group
	Possible Values:	PRIO1	Priority 1
		PRIO2	Priority 2
		PRIO3	Priority 3
		PRIO4	Priority 4
		PRIO5	Priority 5
		PRIO6	Priority 6
		PRIO7	Priority 7
		PRIO8	Priority 8
		PRIO9	Priority 9

REDRFCTN	Redundant transfer of RFC2833 tones according to RFC2198 IMPORTANT: The parameters REDRFCTN/RFCDTMF/RFCDFMOIP must have the same value in all IPDA gateways (STMI2/4 with regard to AMO CGWB & NCUI2+/4 with regard to AMO STMIB). This avoids problems and a common function across all systems is achieved!
	Type of Input:	single value, 8. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	CHANGE for MTYPE=INITCGW: YES

REGEXTGK	GW REGISTRATION AT EXTERNAL GATEKEEPER
	Type of Input:	single value, optional
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

REGIP1	IP address of the primary SIP registrar
	Type of Input:	4 single values, concatenated with ., 2. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

REGIP2	IP address of the secondary SIP registrar
	Type of Input:	4 single values, concatenated with ., 6. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

REGTIME	Time in seconds the SIP registration is valid
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	numeric, 30-65535

RFCDTMF	Transfer DTMF tones according to RFC2833 IMPORTANT: The parameters REDRFCTN/RFCDTMF/RFCDFMOIP must have the same value in all IPDA gateways (STMI2/4 with regard to AMO CGWB & NCUI2+/4 with regard to AMO STMIB). This avoids problems and a common function across all systems is achieved!
	Type of Input:	single value, 7. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	CHANGE for MTYPE=INITCGW: YES

RFCFMOIP	Transfer fax/modem tones according to RFC2833 IMPORTANT: The parameters REDRFCTN/RFCDTMF/RFCDFMOIP must have the same value in all IPDA gateways (STMI2/4 with regard to AMO CGWB & NCUI2+/4 with regard to AMO STMIB). This avoids problems and a common function across all systems is achieved!
	Type of Input:	single value, 6. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	CHANGE for MTYPE=INITCGW: NO

ROLE	Role of the WBM-User
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	ADMIN	Administrator (Standard WBM administration)	DB_WBM_ROLE_ADMIN
		ENGR	Developer(Access all -incl. hidden features)	DB_WBM_ROLE_ENGR
		READONLY	Administrator with read-only access	DB_WBM_ROLE_READONLY
		SU	Superuser (Access to all features)	DB_WBM_ROLE_SU
	Default Value:	ADMIN

RTP	Size of RTP package (ms)
	Type of Input:	single value, optional
	Possible Values:	10	10 ms	1
		20	20 ms	2
		30	30 ms	3
		40	40 ms (JB, RTP size) / AF11 (TOS)	4
		50	50 ms	5
		60	60 ms	6
		70	NO LONGER SUPPORT AND WILL BE CHANGED TO 60 MS	7
		80	NO LONGER SUPPORT AND WILL BE CHANGED TO 60 MS	8
		90	NO LONGER SUPPORT AND WILL BE CHANGED TO 60 MS	9
	Default Value:	20 (G711A) / 30 (G729)

SECGKID1	ID of the secondary Gatekeeper, 1.Part
	Type of Input:	single value, 7. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters
	Default Value:	SecondaryRASManagerID

SECGKID2	ID of the secondary Gatekeeper, 2.Part
	Type of Input:	single value, 8. parameter of a min-1-group
	Possible Values:	text (case sensitive), up to 64 characters

SECGKIP	IP Adress of the Secondary Gatekeeper
	Type of Input:	4 single values, concatenated with ., 5. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

SECGKPN	Port Number of the Secondary Gatekeeper
	Type of Input:	single value, 6. parameter of a min-1-group
	Possible Values:	numeric, 1024-65535
	Default Value:	1719

SECSUBS	Security Flag for HFA subscribers
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

SECTRNK	Security Flag for H323 trunks
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

SIPREG	register gateway at a SIP registrar
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

SIPTCPP	SIP TCP/UDP listening port for trunking and subscriber scenarios
	Type of Input:	single value, 18. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 1024-65535
	Default Value:	5060

SIPTLSP	SIP TLS listening port for trunking and subscriber scenarios
	Type of Input:	single value, 19. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 1024-65535
	Default Value:	5061

SLOT	Slot Number: 1-121, The possible Slot values depend on the systems architecture and on the LTU and can be found in the BCSU AMO description. A suitable module must be configured for the slot (AMO BCSU)
	Type of Input:	single value, mandatory	(ADD / CHANGE,MTYPE=CGW-Common Gateway Board / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
		single value, optional	(DISPLAY / REGENERATE)
	Possible Values:	numeric, 0-121	(CHANGE,MTYPE=CGW-Common Gateway Board)
		numeric, 1-121	(ADD / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board / DISPLAY / REGENERATE)

SMODE	Standby Mode or Normal Mode A board in Normal Mode has valid board data and normally also OPTIIPs assigned to it. A board in Standby Ready Mode has no valid board data, to this board OPTIIPs can be switched over if another board of the same board reconfiguration pool (AMO BPOOL) becomes defective. A board in Standby Defect Mode has also no valid board data, this board has lost its OPTIIPs and its board data to another board because it's gone defective.
	Type of Input:	single value, mandatory
	Possible Values:	NORMAL	normal mode, no standby mode
		STBYDEF	standby defect mode
		STBYRDY	standby ready mode

SMP	Enable E2E SDP data for native SIP
	Type of Input:	single value, optional
	Possible Values:	NO	no	FALSE
	Possible Values:	YES	yes	TRUE
	Default Value:	YES

SMP4OSV	Enable E2E SDP proxy for SIPQ e.g. for video
	Type of Input:	single value, optional
	Possible Values:	NO	no	FALSE
	Possible Values:	YES	yes	TRUE
	Default Value:	NO

T38FAX	T.38 fax
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	CHANGE for MTYPE=INITCGW: YES

TCPP	TCP port number This port is used by the IP phone during login processing. Note: Only the default value 4060 should be configured.
	Type of Input:	single value, 7. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 1024-65535
	Default Value:	4060

TIMEWIN	Time-Window in seconds
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	numeric, 0-120
	Default Value:	90

TIMTLIVE	Time to live
	Type of Input:	single value, 9. parameter of a min-1-group
	Possible Values:	numeric, 1-65535
	Default Value:	120

TLSP	HFA TLS Port
	Type of Input:	single value, 13. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 1024-65535
	Default Value:	4061

TOSPL	TOS, Payload outgoing STMI for HFA and IPDA
	Type of Input:	single value, 3. parameter of a min-1-group
	Possible Values:	0	0 ms (JB size) / DF (TOS)	0
		100	DSCP25	100
		104	AF31	104
		108	DSCP27	108
		112	AF32	112
		116	DSCP29	116
		12	DSCP3	12
		120	120 ms (JB size) / AF33 (TOS)	120
		124	DSCP31	124
		128	CS4	128
		132	DSCP33	132
		136	AF41	136
		140	DSCP35	140
		144	AF42	144
		148	DSCP37	148
		152	AF43	152
		156	DSCP39	156
		16	DSCP4	16
		160	CS5	160
		164	DSCP41	164
		168	DSCP42	168
		172	DSCP43	172
		176	DSCP44	176
		180	DSCP45	180
		184	EF	184
		188	DSCP47	188
		192	CS6	192
		196	DSCP49	196
		20	DSCP5	20
		200	DSCP50	200
		204	DSCP51	204
		208	DSCP52	208
		212	DSCP53	212
		216	DSCP54	216
		220	DSCP55	220
		224	CS7 (Cisco Router)	224
		228	DSCP57	228
		232	DSCP58	232
		236	DSCP59	236
		24	DSCP6	24
		240	DSCP60	240
		244	DSCP61	244
		248	DSCP62	248
		252	DSCP63	252
		28	DSCP7	28
		32	CS1	32
		36	DSCP9	36
		4	DSCP1	4
		40	40 ms (JB, RTP size) / AF11 (TOS)	40
		44	DSCP11	44
		48	AF12	48
		52	DSCP13	52
		56	AF13	56
		60	DSCP15	60
		64	CS2	64
		68	DSCP17	68
		72	AF21	72
		76	DSCP19	76
		8	DSCP2	8
		80	80 ms (JB, RTP size) / AF22 (TOS)	80
		84	DSCP21	84
		88	AF23	88
		92	DSCP23	92
		96	CS3	96
	Default Value:	CHANGE for MTYPE=INITCGW: 184 (H'B8) EF

TOSSIGNL	TOS, DiffServ Code Point for signalling for HFA
	Type of Input:	single value, 4. parameter of a min-1-group
	Possible Values:	0	0 ms (JB size) / DF (TOS)	0
		100	DSCP25	100
		104	AF31	104
		108	DSCP27	108
		112	AF32	112
		116	DSCP29	116
		12	DSCP3	12
		120	120 ms (JB size) / AF33 (TOS)	120
		124	DSCP31	124
		128	CS4	128
		132	DSCP33	132
		136	AF41	136
		140	DSCP35	140
		144	AF42	144
		148	DSCP37	148
		152	AF43	152
		156	DSCP39	156
		16	DSCP4	16
		160	CS5	160
		164	DSCP41	164
		168	DSCP42	168
		172	DSCP43	172
		176	DSCP44	176
		180	DSCP45	180
		184	EF	184
		188	DSCP47	188
		192	CS6	192
		196	DSCP49	196
		20	DSCP5	20
		200	DSCP50	200
		204	DSCP51	204
		208	DSCP52	208
		212	DSCP53	212
		216	DSCP54	216
		220	DSCP55	220
		224	CS7 (Cisco Router)	224
		228	DSCP57	228
		232	DSCP58	232
		236	DSCP59	236
		24	DSCP6	24
		240	DSCP60	240
		244	DSCP61	244
		248	DSCP62	248
		252	DSCP63	252
		28	DSCP7	28
		32	CS1	32
		36	DSCP9	36
		4	DSCP1	4
		40	40 ms (JB, RTP size) / AF11 (TOS)	40
		44	DSCP11	44
		48	AF12	48
		52	DSCP13	52
		56	AF13	56
		60	DSCP15	60
		64	CS2	64
		68	DSCP17	68
		72	AF21	72
		76	DSCP19	76
		8	DSCP2	8
		80	80 ms (JB, RTP size) / AF22 (TOS)	80
		84	DSCP21	84
		88	AF23	88
		92	DSCP23	92
		96	CS3	96
	Default Value:	CHANGE for MTYPE=INITCGW: 104 (H'68) AF31

TPRH323A	B-Channel count for H323-ANNEX for Trunk protokol
	Type of Input:	single value, 12. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 0-120
	Default Value:	1 (H'1)

TRPRH323	B-Channel count for H323 for Trunk protokol
	Type of Input:	single value, 11. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 0-120
	Default Value:	1 (H'1)

TRPRSIP	B-Channel count for SIP for Trunk protokol
	Type of Input:	single value, 9. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 0-120
	Default Value:	1 (H'1)

TRPRSIPQ	B-Channel count for SIPQ for Trunk protokol
	Type of Input:	single value, 10. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	numeric, 0-120
	Default Value:	1 (H'1)

TYPE	Data type
	Type of Input:	single value, mandatory		(CHANGE,MTYPE=CGW-Common Gateway Board / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
	Type of Input:	single value, optional		(DISPLAY / REGENERATE)
	Possible Values:	ALL	All data types	(CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
		ASC	ASC Config Data
		DLSDATA	DLS Data	(CHANGE,MTYPE=CGW-Common Gateway Board / DISPLAY / REGENERATE)
		DLSDATA	Init DLS Data	(CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
		DMCDATA	DMC specific data
		DSP	No longer supported
		GKDATA	Primary and Secondary Gatekeeper
		GLOBIF	Boardspecific global data	(CHANGE,MTYPE=CGW-Common Gateway Board / DISPLAY / REGENERATE)
		GLOBIF	Ethernet Interface	(CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
		GWDATA	Gateway Data
		GWSECTOR	sector number of an IPDA-gateway
		H235DATA	No longer supported
		IPCONF	IP configuration	(CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board / DISPLAY)
		IPCONF	ip configuration	(CHANGE,MTYPE=CGW-Common Gateway Board / REGENERATE)
		IPV6IF	Boardspecific IPV6 data	(DISPLAY)
		IPV6IF	Boardspecific ipv6 data	(CHANGE,MTYPE=CGW-Common Gateway Board / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board / REGENERATE)
		JB	adaptive jitter buffer
		LEGKDATA	Large Enterprise Gate Keeper data	(CHANGE,MTYPE=CGW-Common Gateway Board / DISPLAY / REGENERATE)
		MANLANIF	Management LAN	(CHANGE,MTYPE=CGW-Common Gateway Board / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
		MANLANIF	Management LAN interface data	(DISPLAY / REGENERATE)
		MGNTDATA	Management Station and Back-Up Server
		SERVIF	Service Interface	(CHANGE,MTYPE=CGW-Common Gateway Board / DISPLAY / REGENERATE)
		SIPTRERH	SIP trunking data for ERH (Endpoint Reg. Handler)
		SIPTRSSA	SIP trunking data for SSA (SIP Stack Adaptor)
		STBYDATA	Standby Data	(CHANGE,MTYPE=CGW-Common Gateway Board / CHANGE,MTYPE=INITCGW-Initialize STMI2-IGW (HG3550-2/HG3540) Board)
		WBMDATA	WBM Login Data

UDPPRTHI	Base for calculating the used UDP ports for RTP/RTCP/SRTP/SRTCP streams for HG3500/CGW; exception for IPDA master connection --> SIPCO/UDPPORT (automatically calculated by AMO, i.e. not changeable directly)
	Type of Input:	single value, 2. parameter of a min-1-group
	Possible Values:	numeric, 2023-65535
	Default Value:	CHANGE by MTYPE=INITCGW: 30099 for the board with 60 b-channels and for the board with 120 b-channels

UDPPRTLO	Base for calculating the used UDP ports for RTP/RTCP/SRTP/SRTCP streams for HG3500/CGW; exception for IPDA master connection --> SIPCO/UDPPORT
	Type of Input:	single value, 1. parameter of a min-1-group
	Possible Values:	numeric, 1024-64536
	Default Value:	CHANGE by MTYPE=INITCGW: 29100

UIMODE	Port Number of the Back-Up Server
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	CLASSIC	classical mode	DB_MUI_MODE_CLASSIC
		MAINTAIN	maintenance mode	DB_MUI_MODE_MAINTENANCE
		SECURITY	security mode	DB_MUI_MODE_SECURE
	Default Value:	maintain

USEWANIF	WAN Interface is used for IP address
	Type of Input:	single value, 16. parameter of a min-1-group			(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
	Type of Input:	single value, optional			(ADD,SMODE=NORMAL-normal mode, no standby mode)
	Possible Values:	NO	No	0
	Possible Values:	YES	Yes	1
	Default Value:	NO

VAD	Voice Activity Detection
	Type of Input:	single value, optional
	Possible Values:	N	No	0
		NO	No	0
		Y	Yes	1
		YES	Yes	1
	Default Value:	NO

VLAN	VLAN tagging on LAN-IF
	Type of Input:	single value, 4. parameter of a min-1-group			(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
	Type of Input:	single value, optional			(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=STBYDATA-Standby Data)
	Possible Values:	NO	no	FALSE
	Possible Values:	YES	yes	TRUE
	Default Value:	NO			(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)

VLANID	Virtual LAN Identification Special settings are required by certain LAN equipment (routers...), in other cases the VLAN Id should be set to 0 (default)
	Type of Input:	single value, 5. parameter of a min-1-group	(CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)
		single value, optional	(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=STBYDATA-Standby Data)
	Possible Values:	numeric, 0-4095
	Default Value:	0	(ADD,SMODE=NORMAL-normal mode, no standby mode / ADD,SMODE=STBYDEF-standby defect mode / ADD,SMODE=STBYRDY-standby ready mode / CHANGE,MTYPE=CGW-Common Gateway Board,TYPE=GLOBIF-Boardspecific global data)

WPUBIP	WAN Public IP
	Type of Input:	4 single values, concatenated with ., 17. parameter of a min-1-group
	Possible Values:	numeric, 0-255
	Default Value:	0.0.0.0

Error Messages

F02	F02: Slot <ltu>-<slot> does not exist
F03	F03: LTU <ltu> has not been assigned
F04	F04: No CGW board assigned to slot <ltu>-<slot>
F05	F05: CGW board data have not been assigned. First add CGW board data with: ADD-CGWB:...;
F06	F06: CGW board data have already been assigned.
F07	F07: Loadcommand PIT not successful: <loadresult>
F09	F09: The accounts LOGINTRM and LOGINWBM must not be identical. <ltu>-<slot>
F10	F10: No free place in the User Table found. <ltu>-<slot>
F11	F11: New User Name.Parameter passwwbm must be entered. <ltu>-<slot>
F12	F12: For the actual board the parameter DMCCONN can not exceed the total number of @@@ possible DMC connections (b-channels).
F13	F13: Gateway number <gwno> is already assigned to another board.
F14	F14: Gateway number <gwno> is assigned to board and cannot be changed. First the configuration must be deleted from GKREG (DEL-GKREG:<gwno>).
F15	F15: No Gateway number is assigned to this board.
F16	F16: The values 0.0.0.0 and 255.255.255.255 are not allowed for parameter <IPADR\|NETMASK>.
F17	F17: The entered gateway number is out of permitted range. Enlarge the range with ADD-DIMSU: GWREG=<number>.
F18	F18: The username entered does not exist.
F19	F19: Ip-address "@@@.@@@.@@@.@@@" is already configured and cannot be used once more.
F20	F20: The sector @@@@ is already assigned to a gateway at pen @@-@@-@@@
F21	F21: <IPADR\|NETMASK> : @@@.@@@.@@@.@@@ is invalid
F22	F22: For Registration on a remote Gateway the parameter GWDIRNO Has to be entered.
F23	F23: A direct change from internal to external registration or vice versa is not possible. The gateway must be deleted at first with AMO GKREG.
F24	F24: A direct change from internal to external registration or vice versa is not possible. The gateway must be deleted at first with AMO BCSU.
F25	F25: Board is not configured as a Standby board by AMO-BCSU
F26	F26: No board data can be administrated because the board is configured in a Standby Mode.
F27	F27: The parameter <Data Type> is allowed for the following functionalities: @@@@@@@@ @@@@@@@@ @@@@@@@@ @@@@@@@@ @@@@@@@@ @@@@@@@@
F28	F28: If the functionality CGW-IPDA exists, IP adress can not be changed. IPADR can be chanced via CHA-BCSU:IPGW,..;
F30	F30: Only one of the parameteres TRPRSIP,TRPRSIPQ,TRPRH323 and TPRH323A can be different than zero.
F32	F32: @@@@@@@@ must not be greater than @@@@@@@@ (@@@@@@@@ = @@@@@, @@@@@@@@ = @@@@@).
F33	F33: The range between UDPPRTLO and UDPPRTHI must be at least @@@. (UDPPRTLO = @@@@@, UDPPRTHI = @@@@@).
F34	F34: UDPPRTLO = @@@@@ is not allowed. The lower bound of the UDP port range must be even.
F35	F35: Only H323, H323A or a combination of SIP and SIPQ can be different than zero.
F36	F36: UDPPORT HAS NOT BEEN CHANGED SINCE THERE IS AN OVELAPPING BETWEEN NEEDED IPDA PORTS AND UDPPORTS OF HG3500 BOARD LOCATED AT @@-@@-@@@. FOR DETAILS, CHECK VIA DISP-SIPCO;
F38	F38: Entered parameter(s) must fit to rules of MINDLYV < AVGDLYV < MAXDLYV
F39	F39: Entered parameter(s) must fit to rules of AVGDLYD < MAXDLYD
F40	F40: CODEC CONFIGURATION NOT POSSIBLE BECAUSE OF FOLLOWING RESTRICTIONS : - G723 ONLY RTP SIZE 30, 60 ALLOWED - G729 ONLY VAD=NO AND RTP SIZE 20, 30, 40, 50, 60 ALLOWED - G729A ONLY VAD=NO AND RTP SIZE 20, 30, 40, 50, 60 ALLOWED - G729B ONLY VAD=YES AND RTP SIZE 20, 30, 40, 50, 60 ALLOWED - G729AB ONLY VAD=YES AND RTP SIZE 20, 30, 40, 50, 60 ALLOWED
F42	F42: THE GATEWAY DIRECTORY NUMBER ENTERED IN PARAMETER GWDIRNO IS ALREADY CONFIGURED FOR GATEWAY <gwno>.
F43	F43: TRUNK PROTOCOL PARAMETER (@@@@@@@@) CAN NOT BE SET TO @@@ BECAUSE IT EXCEEDS MAX AMOUNT OF B-CHANNELS RESERVED FOR HG3550 FUNCTIONALITY (DIS-BCSU)
F44	F44: THIS CODEC IS NOT ALLOWED FOR STMI BOARDS.
F45	F45: THE PARAMETERS TRPRH323 AND TPRH323A ARE NOT POSSIBLE BECAUSE H323 TRUNKS ARE NOT SUPPORTED ON VIRTUAL GATEWAYS.
F46	F46: CONFIGURATION OF GATEKEEPER DATA NOT SUPPORTED ON VIRTUAL GATEWAYS.
F47	F47: CODEC G723 IS NOT SUPPORTED ON VIRTUAL GATEWAYS AND STMIX BOARDS.
F49	F49: LTU=0 IS ONLY USED FOR TYPE=WBMDATA AND TYP=MGNTDATA.
F50	F50: SLOT CAN NOT SET TO 0, IF LTU IS NOT 0.
F51	F51: IPV6 FUNCTIONILITY IS SUPPORTED ONLY FOR SOFTGATES, STMIX AND STMIY.
F52	F52: PARAMETER IPMODE CAN BE CHANGED TO IPV6 OR DUALSTCK FOR SOFTGATE BOARDS CONFIGURED FOR SIP TRUNKING AND SIP SUBSCRIBER.
F53	F53: The value 255.255.255.255 is not allowed for parameter <MIPADR\|MNETMASK>.
F54	F54: For the codec OPUS only the RTP=10,20,40,60 ms are allowed.
F55	F55: USEWANIF IS ONLY ALLOWED FOR VHG3500 BOARDS AND STMIX.
F56	F56: The combination SMP4OSV=YES, SMP=NO IS NOT ALLOWED. PARAMETER SMP IS NOT CHANGED
F57	F57: SMP4OSV=YES IS NOT ALLOWED FOR STMI2 OR STMI4 CARDS
F58	F58: TRUNK PROTOCOL PARAMETERS CAN NOT BE SET BECAUSE IT EXCEEDS MAX AMOUNT OF B-CHANNELS RESERVED FOR HG3550 FUNCTIONALITY (DIS-BCSU)
F59	F59: THE COMBINATION OF DMC ACTIVATION WITH WPUBIP AND/OR USEWANIF SET TO YES IS NOT ALLOWED.
F60	F60: THE COMBINATION OF NPE LICENSE WITH WPUBIP AND/OR USEWANIF SET TO YES IS NOT ALLOWED. PLEASE CHECK DISPLAY-CODEW;
F61	F61: LIDHFA FEATURE IS NOT ACTIVATED (AMO-STMIB). IPADDR AND NETMASK CANNOT BE 0.0.0.0;
F62	F62: IPADDR AND NETMASK COMBINATION IS NOT ACCEPTED(<IPADR\|NETMASK>:0.0.0.0)
F63	F63: <IPADR\|NETMASK>:0.0.0.0 IS ALLOWED ONLY FOR HFA BOARDS AND LIDHA FEATURE
F64	F64: <IPADRV6\|DEFRTV6\|DNSIPV6\|DNS2IPV6> VALUE IS NOT VALID. IPV6 ADDRESS SHOULD BE REPRESENTED AS 8 GROUPS OF 4 HEXADECIMAL DIGITS. THE GROUPS SHOULD BE SEPARATED BY COLONS (:).
F65	F65: IP ADDRESS @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IS ALREADY CONFIGURED AND CANNOT BE USED ONCE MORE.

Advisory Messages

H01	H01: No <Feature data> data found
H02	H02: <Feature data> data have been deleted
H03	H03: <Feature data> data have been changed
H04	H04: Parameter SLOT will be ignored, if range is entered for parameter LTU
H05	H05: Parameter SLOT will be ignored, if no value is entered for parameter LTU
H06	H06: <Feature data> data have <not \|already >been assigned
H07	H07: <changed\|assigned> BOARD DATA - REQUIRES MANUAL BOARD RESTART RES-BSSU:PEN,,<ltu>,<slot>;
H08	H08: The <Feature data> data are uploaded during the transition of the board into the 'READY' state.
H09	H09: Dynamic board is not available. Board data have not been loaded
H10	H10: Board not "ready". Board data have not been loaded
H11	H11: <Feature data> Board data have been loaded to @@-@@-@@@.
H12	H12: The two lowest bits of at least one Tos values have been reset to zero
H13	H13: DMCCONN IS NOT RELEVANT FOR AN HFA BOARD, DMC SUPPORT FOR HFA SUBSCRIBERS IS CONTROLLED WITH THE SDAT ATTRIBUTE DMCALLWD.
H14	H14: The board requires the setting BITRATE=100MBFD to guarantee proper. operation. All other settings can lead to heavy troubles in the IP network(e.g.: Half ways, cross talks, etc.)
H15	H15: There is no gatekeeper in local system configured. A gateway number is not needed and therefore set to zero. GW-Number is not considered unless GATEKPR is set by means of CHA-ZANDE:TYPE=ALLDATA,GATEKPR=YES;
H16	H16: Sector number already configured for entered gateway.
H17	H17: For the specified STMI4 board 10 MBit/s is not allowed and will be ignored
H19	H19: There is no local Gatekeeper configured, parameter REGEXTGW will be ignored
H20	H20: THIS GATEWAY HAS TO REGISTER ON A REMOTE GATEKEEPER, PARAMETER GWNO IS IGNORED.
H21	H21: Parameter GWNO is not relevant and will be ignored
H22	H22: THERE EXISTS INCONSISTENCY BETWEEN LEGK REGISTRATION DATA and GATEKEEPER FLAG IN AMO-ZANDE. YOU HAVE CHANGED THE GATEKEEPER FLAG WITHOUT DELETING PREDECESSOR THE REGISTERED GATEWAYS. THIS FUNCTION IS NOT SUPPORTED BY THE SYSTEM! CHANGE THE AMO-ZANDE FLAG BACK AND DELETE THEN THE GATEWAYS. ADDITIONAL INFORMATION ABOUT CHANGING THE TYPE OR REGISTRATION IS CONTAINED IN THE SERVICE DOKU,FEATURE USAGE EXAMPLE -> LARGE ENTERPRISE GATEKEEPER.
H23	H23: PLEASE VERIFY ALSO IF THE PROTOCOL @@@@@@@@ IS CONFIGURED WITH AMO-GKREG IN THE GATEWAY ATTRIBUTES OF THE CORRESPONDING GATEWAY, OTHERWISE NO IP CONNECTION CAN BE ESTABLISHED. COMMAND: DIS-GKREG:<gwno>;
H24	H24: The TCP port TCPP has been set to the value <TCP Port> which differs from the default value <TCP Port default value>. This can cause a disconnection between the IP terminals and the STMI-HFA board.
H25	H25: CGW board includes STMI-IPDA functionality and IP address has already written by AMO-BCSU.Therefore IPADR parameter is ignored.
H26	H26: Board data have been configured for the standby< ready/ defect> mode. vhfa needs assigning to a bpool group and requires a res-bssu vsip will require a res-ussu after bpool is configured.
H27	H27: The default value of parameter BITRATE has been changed to 100MBFD because of HW related restrictions.
H28	H28: THE PARAMETER NETMASK (GLOBIF) HAS ALSO TO BE CONFIGURED BY SIPCO.
H29	H29: ONLY H323, H323A OR A COMBINATION OF SIP AND SIPQ CAN BE DIFFERENT THAN ZERO: @@@@@@@@ IS CHANGED TO ZERO.
H30	H30: '*****' deletes the entries of PRIGKID1 and PRIGKID2 and/or SECGKID1 and SECGKID2 (empty string)
H31	H31: Default values of UDP Port for HG3500 board is adjusted according to UDPPORT value in AMO-SIPCO. UDPPRTLO value for HG3500 board is set to @@@@@ which is just after IPDA UDP port range.
H32	H32: The two lowest bits of at least one Tos values have been reset to zero
H33	H33: The two least significant bits of <TOSPL or TOSSIGNL> have been set to zero. new value of <TOSPL or TOSSIGNL>: <Type of Service>
H36	H36: The changed parameters "MINDLYV" and/or "PACKLOSS" have no effect until JBMODE is set to: 2[ADAPTIVE].
H37	H37: JB parameters can not be changed unless DAJB is not set by means of CHA-ZANDE:TYPE=ALLDATA,DAJB=NO;
H38	H38: The specified TOSPL value cannot be configured. Because function IPDA is configured for this board, the TOSPL value must be equal to the central TOSPL value for IPDA, configurable by means of AMO-SIPCO. TOSPL value @@@ has been assigned automatically.
H39	H39: For A-Law the parameter PATTERN must have the value 213 (H'D5), for U-LAw the value must be set to 255 (H'FF).
H40	H40: De-configuring Codec G711A and/or G711U the functionality of IP trunks on this board will be strongly interfered.
H41	H41: The parameters SECSUBS and SECTRNK must be configured identical. Therefore the parameters are re-configured (SECTRNK is master if needed).
H44	H44: If GWSECRET or GWUSERID is specified, GWREALM should be specified too.
H45	H45: CODEC G723 IS NOT SUPPORTED ON VIRTUAL GATEWAYS AND STMIX BOARDS IT HAS BEEN DE-CONFIGURED INTERNALLY.
H47	H47: DHCP is activated. LEGK configurations (AMO-GKREG) are suspended for the actual gateway.
H48	H48: For IPMODE set to Dual Stack or IPV6 mode, a profile for SIPQ trunks has to be configured via WBM.
H49	H49: The parameters IPADR, NETMASK, VLAN, VLANID and DEFRT are ignored for traditional HG3500 boards.
H50	H50: The specified codec must not be used twice. The codec of Prio@@ is replaced with value 'NONE'.
H51	H51: All HG3500 Boards will be updated with this data.
H52	H52: The parameter UDPPRTHI is read only. It will be ignored. It will be set to UDPPRTLO + 999.
H54	H54: If Multiple Feature Support (MFS) is configured the VLAN settings of the following AMOs are used: - MFS with IPDA functionality (AMO:SIPCO) - MFS without IPDA functionaltiy (AMO:CGWB)
H55	H55: Attention: This setup (RFCFMOIP=YES/RFCDTMF=NO) is causing problems with DTMF on Mediatrix gateways MTX41xxx!
H56	H56: Please note that DHCP functionality is not fully supported yet.
H57	H57: Attention: CGW board is no more possible to add as STBYDEF in V6 R2, therefore it is converted to STBYRDY.
H59	H59: MANLANIF data is taken from Softgate.
H60	H60: PARAMETER BITRATE IS IGNORED, AS IT IS CONFIGURED IN THE OS FOR THE SOFTGATE FOR VIRTUAL BOARDS.
H61	H61: JITBUFD parameter is no longer used and will be ignored.
H62	H62: ASC TOS VALUE(S) HAVE BEEN CHANGED
H63	H63: YOU MUST ENSURE THE NETWORK SIDE IS CONFIGURED WITH THE SAME DUPLEX/BITRATE SETTINGS TO AVOID FUNDAMENTAL VOIP PROBLEMS (DUPLEX MISMATCH).
H64	H64: THE PARAMETERS FROM MANLANIF BRANCH ARE MANDATORY FOR STIMX STANDBY BOARD. CHANGE-CGWB:CGW,<LTU>,<SLOT>,MANLANIF...
H65	H65: THE RTP SIZE 70MS, 80MS, 90MS ARE NO LONGER SUPPORTED AND WILL BE AUTOMATICALLY CHANGED TO 60MS
H66	H66: ATTN: After a change of IPADR or MIPADR a new HG3550M Assistant backup set is required
H67	H67: When using VLAN, the usage should be consistent across both VOIP and management interfaces.
H68	H68: The combination SMP4OSV=YES, SMP=NO IS NOT ALLOWED. PARAMETER SMP IS CHANGED TO YES
H69	H69: SMP ONLY ACTIVATES E2E SDP FOR SIP TRUNKING AND SIP DEVICES
H70	H70: SMP4OSV ONLY ACTIVATES E2E SDP FOR SIPQ TRUNKING (AND REQUIRES SMP=YES)
H71	H71: PLEASE CHECK AND CORRECT THE GLOBIF & DMCDATA CONFIGURATION! THE COMBINATION OF DMC ACTIVATION WITH WPUBIP AND/OR USEWANIF SET TO YES IS NOT ALLOWED.
H72	H72: THE COMBINATION OF ACTIVATED DMC WITH WPUBIP AND/OR USEWANIF IS NOT ALLOWED. DMCDATA PARAMETERS ARE CHANGED TO 0,NO,NO.
H73	H73: Feature H.235 Security is no longer supported
H74	H74: SMP/SMP4OSV HAVE NO EFFECT WHEN DMCCONN=0
H75	H75: VAD IS NOT SUPPORTED FOR G722
H76	H76: MGNTIP, MGNTPN, BUSIP & BUSPN ARE IGNORED AND DERIVED FROM AMO SIPCO
H77	H77: CORRESPONDING GKREG ENTRY MUST BE ADDED
H78	H78: THE COMBINATION OF NPE LICENSE WITH WPUBIP AND/OR USEWANIF SET TO YES IS NOT ALLOWED. PLEASE CHECK DISPLAY-CODEW;
H79	H79: DMCCONN ADJUSTED TO @@@ WHICH IS THE MAXIMUM ALLOWED FOR THIS BOARD.
H80	H80: <IPADR\|NETMASK> IS SET TO 0.0.0.0. IF THE <IPADR\|NETMASK> IS NOT ALREADY NULL, IT SHOULD BE CHANGED TO THIS VALUE.
H81	H81: <IPADR\|NETMASK> IS CHANGED. IF THE <IPADR\|NETMASK> IS NULL, IT SHOULD BE CHANGED, TOO