ZANDE - System data - extended

This AMO is an extension of AMO-ZAND This AMO can be used to change, interrogate, and regenerate central system data. The data is divided into different data types to provide a better overview.

MLPP Multi-Level Precedence and Preemption Service
ALLDATA This includes all central system data from the database with the exception of the data that is changed by means of AMO FEASU (features).
OPTISET Settings for OPTISET/OPTIPOINT devices
ATND Settings for attendant console only
ACD Settings for ACD-G
KEYSYS Settings for Key System
DMC Settings for DMC Connections
ACL Settings for ACL related functions

Destination Processor: BP (Switching Unit)

Functions

REGENERATE Regenerate central system data SWU password class 2
DISPLAY Interrogate central system data SWU password class 0
CHANGE Change central system data in SWU password class 2

Procedure Overview

REGENERATE-ZANDE

REGENERATE-ZANDE
[TYPE=MLPP];
[TYPE=ALLDATA];
[TYPE=ALLDATA2];
[TYPE=OPTISET];
[TYPE=ATND];
[TYPE=ACD];
[TYPE=KEYSYS];
[TYPE=DMC];
[TYPE=DLS];
[TYPE=SECURITY];
[TYPE=DNS];
[TYPE=OPTFEA];
[TYPE=ACL];
[TYPE=ADDR];
[TYPE=OSMO];
[TYPE=LICDATA];
[TYPE=ONLIC];

Example
Regenerate system data.

Input:
REG-ZANDE;

Output:
 CHANGE-ZANDE:MLPP,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,METHODE1;
 CHANGE-ZANDE:ALLDATA,NO,NO,NO,NO,NO,NO,NO, AP EMERGENCY ,NO,NO,NO,NO,NO,NO,NO,NO,,NO,NO,NO,NO,NO;
 CHANGE-ZANDE:ALLDATA2,NO,NO,NO,NO,NO,NO,NO,NO,NO;
 CHANGE-ZANDE:OPTISET,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO;
 CHANGE-ZANDE:ATND,NO,NO;
 CHANGE-ZANDE:ACD,NO,NO,NO,NO;
 CHANGE-ZANDE:KEYSYS,NO,NO,NO,NO,NO;
 CHANGE-ZANDE:DMC,NO,NO;
 CHANGE-ZANDE:DLS,0.0.0.0,10444,NO;
 CHANGE-ZANDE:SECURITY,YES,TRADITIO,128BIT,MIKEY1;
 CHANGE-ZANDE:DNS,0.0.0.0,0.0.0.0;
 CHANGE-ZANDE:OPTFEA,D,1000;
 CHANGE-ZANDE:ACL,NO,NO,NO;

DISPLAY-ZANDE

DISPLAY-ZANDE
TYPE=MLPP;
TYPE=ALLDATA;
TYPE=ALLDATA2;
TYPE=OPTISET;
TYPE=ATND;
TYPE=ACD;
TYPE=KEYSYS;
TYPE=DMC;
TYPE=DLS;
TYPE=SECURITY;
TYPE=DNS;
TYPE=OPTFEA,[FLAGS=<param>];
TYPE=LOADBHV,[LIST=<param>];
TYPE=ACL;
TYPE=ADDR;
TYPE=OSMO;
TYPE=LICDATA;
TYPE=ONLIC;

Example
Interrogate MLPP central system data SWU

Input:
DISPLAY-ZANDE:TYPE=MLPP;

Output:
  MLPP SYSTEM DATA:
  ====================
 
    DOMALLOC = YES,         DOMCHECK = NO,
    MCIQTAC  = NO,          USMUAUL  = YES,
    USMUXFER = YES,         FWDPREC  = YES,
    CAMPPREC = NO,          PNTTGLE  = NO,
    MCAUSE   = N0,          CWTPRECT = NO,
    CONFDSCT = N0,          GSCR     = METHODE1;

CHANGE-ZANDE

CHANGE-ZANDE
TYPE=MLPP, {(min 1) DOMALLOC=<param>, DOMCHECK=<param>, MCIQTAC=<param>, USMUDIV=<param>, USMUXFER=<param>, FWDPREC=<param>, CAMPPREC=<param>, PNTTGLE=<param>, MCAUSE=<param>, CWTPRECT=<param>, CONFDSCT=<param>, GSCR=<param>, SEPHOTLN=<param>};
TYPE=ALLDATA, {(min 1) SCALLOG=<param>, H235SEC=<param>, GATEKPR=<param>, DECTPS=<param>, NONPIIW=<param>, DAJB=<param>, NOVNIDCO=<param>, APEDTXT=<string>, DRLEITNG=<param>, IMPRPKZ=<param>, SILMON=<param>, PSEPDIAL=<param>, CMIV30=<param>, DTMFPA=<param>, CFWDEPRT=<param>, DRPS=<param>, ALTCC=<key-num>, CMISLWDN=<param>, NVECOSPD=<param>, VECOSSPD=<param>, DNLPTHRL=<param>, STMIPRES=<param>, MRNGXFER=<param>, VNR=<param>, DISPMOD=<param>, CLIPTRNK=<param>, LEDSGVCE=<param>, SIPDIAL=<param>, NPLMSURV=<param>, SPS=<param>, VNRCN=<param>, BRANDID=<number>};
TYPE=ALLDATA2,[ANASPCH=<param>], [NOLANMON=<param>], [HIMED=<param>], [CFABLOOP=<param>], [CLIPNO=<param>], [DSNHOTLN=<param>], [LOGPART=<param>], [DTMF2833=<param>], [NOIPBLWL=<param>], [VNRDNO=<param>];
TYPE=OPTISET, {(min 1) EDITDIAL=<param>, SUPDRCPK=<param>, DISPPICK=<param>, NODDSLAB=<param>, CHSCALLD=<param>, DISPCFW=<param>, SNGLBTN=<param>, CHPARSIG=<param>, PINDISP=<param>, PROTDSS=<param>, SUPRDND=<param>};
TYPE=ATND, {(min 1) RECALLCO=<param>, RECCOMPN=<param>, NOINTTRS=<param>};
TYPE=ACD, {(min 1) LAUTHOFF=<param>, WHISANN=<param>, USERBUSY=<param>, RTOFFOLD=<param>, AICSACD=<param>, NOHOLDT=<param>, ORIGDNI=<param>, ACDALTRT=<param>, EXMNTONE=<param>, EXTSLTMN=<param>, ACDASST=<param>};
TYPE=KEYSYS, {(min 1) BRDGETON=<param>, LRNGCOFF=<param>, DSAALINC=<param>, NOLABEL=<param>};
TYPE=DMC,[EARLYDMC=<param>], [DMC2400=<param>];
TYPE=DLS, {(min 1) DLSIPADR=<number>, DLSPORT=<number>, DLSACPAS=<param>};
TYPE=SECURITY, {(min 1) SPESUPP=<param>, SECTDMSB=<param>, SECTDMTR=<param>, SECIPSB=<param>, SECIPTR=<param>, KEYLEN=<string>, MIKEYOPT=<param>, MHFAM=<param>, SECLVDSP=<param>, CONT=<param>};
TYPE=DNS,[DNSIPADR=<number>], [DNSIPAD2=<number>];
TYPE=OPTFEA,OPTFEA=<param>, FEANUM=<number>;
TYPE=LOADBHV,
PIT=HRBHV,LOAD=<param>;
PIT=LWSRC,[PARTNO=<string>], [FCTID=<number>], LOADDEV=<param>;
TYPE=ACL,[JOURBUSY=<param>], [DIVCRDIR=<param>], [CTSLMLON=<param>];
TYPE=ADDR,[ZIPCODE=<string>], [STRNAME=<string>], [STRNUM=<string>];
TYPE=OSMO,[SERVMAIL=<string>], [OSVTLS=<number>], [SBCSTLS=<number>], [QOSVIDEO=<number>], [DSCPTOS=<param>], [WMM=<param>], [SECOSV=<param>], [SECOSBC=<param>], [FEATLIST=<param>], [VCPRIO1=<param>], [VCPRIO2=<param>], [SBCFQDN1=<string>], [SBCADDR1=<number>], [PORT1=<number>], [SBCFQDN2=<string>], [SBCADDR2=<number>], [PORT2=<number>], [SBCFQDN3=<string>], [SBCADDR3=<number>], [PORT3=<number>], [SBCFQDN4=<string>], [SBCADDR4=<number>], [PORT4=<number>], [SBCFQDN5=<string>], [SBCADDR5=<number>], [PORT5=<number>];
TYPE=LICDATA, {(max 1) CLAADDR=<number>, CLAFQDN=<string>}, [CLAFQDNC=<string>], [CLAPORT=<number>], [LICENBL=<param>];
TYPE=ONLIC,[USEONLIC=<param>], [USESGLIC=<param>], [CLK=<string>], {(max 1) OCLAADDR=<number>, OCFQDN=<string>}, [OCFQDNC=<string>], [USEPROXY=<param>], {(max 1) PROXYIP=<number>, PFQDN=<string>}, [PFQDNC=<string>], [PROXYPRT=<number>], [PROXYUSR=<string>], [PROXYPAS=<string>];

The MLPP(multi level preselection and preemption) feature will allow users to assign priorities to a call. Calls with higher priority will preempt calls with lower priority when they are the reason that the called party is busy. Calls with higher priority will preempt calls with lower priority if they occupy resources which are needed by the call with the higher priority.

Changing the parameter USERBUSY in branch ACD :
When the parameter USERBUSY (how B-Channels are released) is changed, seizure attempts following such ACD calls with TDCSU SRCHMODE=ASC/DSC will be released with 'Requested circuit / channel not available', therefore either TDCSU SRCHMODE=CIR should be used or it should be ensured a second route (even using the same trunk group) is available in LDAT with AMO-RICHT parameter REROUT=YES.

Parameter description

ACDALTRT This Parameter activates the possible usage of an alternative route for ACD.
Type of Input: single value, 8. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
ACDASST ACD behavior for SSXfered calls from Anate special station prevent call from following CFB after ACL SST when ACDSD:SYS AFTFWD=NO.
Type of Input: single value, 11. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
AICSACD When AICS feature is activated then all calls are answered automatically. When AICSACD is on, then agents will be answered automatically only if they are logged on and available.
Type of Input: single value, 5. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
ALTCC If an alternative country code number is configured, it can be assigned to trunks via COT=CACO. To delete the configured alternative country code, '*' has to be specified. Before deletion, all trunks should be checked if the COT is still used.
Type of Input: single value, 17. parameter of a min-1-group
Possible Values: 0-9,*,#,A-D, up to 4 characters
ANASPCH Speech instead of 3.1 kHz Audio for Analog phones
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: YES
APEDTXT In case of AP Emergeny this text is displayed on all concerned Optiset/Optipoint devices DB-Initialization: AP Emergency
Type of Input: single value, 8. parameter of a min-1-group
Possible Values: text, 1 to 22 characters
BRANDID Branding Identifier (DB-Initialization: 0)
Type of Input: single value, 32. parameter of a min-1-group
Possible Values: numeric, 0-255
BRDGETON If this parameter is set the bridge signalling tone generation for bridge features on key set devices will be deactivated.
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CAMPPREC Higher precedence incoming calls from the same service domain will preemt all existing calls (even if call waiting is activated at the called party). If this switch is not set all incoming calls will camp on to a busy called party regardless of the service domains and precedence levels. DB-Initialization: no
Type of Input: single value, 7. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
CFABLOOP Activate A to ring instead of B with CFW Loop between A and B.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CFWDEPRT The function of the source dependent routing will be modified with this change. If this parameter is set to YES, then the source group of the redirecting party will be used by the calling party to reach the CF-destination over survivability Path, instead of the source group of the calling party (Source Dependent Routing). DB-Initialization: no
Type of Input: single value, 15. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
CHPARSIG Activate parallel signaling on Executive even if secretary has representative activated.
Type of Input: single value, 8. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CHSCALLD Delete Call Log entry with CHESE if same entry is deleted on Secr or Chef.
Type of Input: single value, 5. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CLAADDR CLA server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., 1. parameter of a max-1-group
Possible Values: numeric, 0-255
CLAFQDN CLA server IP name (DB-Initialization: number 0.0.0.0)
Type of Input: single value, 2. parameter of a max-1-group
Possible Values: text (case sensitive), up to 128 characters
CLAFQDNC CLA server name part 2 (character 129-255)
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 127 characters
CLAPORT CLA server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
CLIPNO CLIP/MWI behavior non standard to ETSI or Bellcore.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CLIPTRNK CLIP Protocol Standart for trunks
Type of Input: single value, 26. parameter of a min-1-group
Possible Values: ACATDTMF DTMF WITH FIRST A AND SUBSEQ. TEL. CATEGORY 1 ACAT
BCMDMF BELCORE with FSK and Multiple Data Message Format MDMF
BCMDMF2 BELCORE with FSK2 and Multiple Data Message Format MDMF_2
BCSDMF BELCORE with FSK and Single Data Message Format SDMF
BCSDMF2 BELCORE with FSK 2 and Single Data Message Format SDMF_2
ETSIDTMF ETSI with DTMF(Dual Tone Multi Frequency) DTMF
ETSIFSK ETSI with FSK(Frequency Shift Key) FSK
ETSIFSK2 ETSI with FSK(Frequency Shift Key)2 FSK_2
NONE Trunk CLIP standard neither DTMF nor FSK KEIN
CLK Online CLK (Cloud License Key) (character 1-38)
Type of Input: single value, optional
Possible Values: text, up to 38 characters
CMISLWDN Reduces message flood for SLC boards in case of a soft restart when many SLC boards are configured in a system to prevent deactivation of ports because of this message flood.
Type of Input: single value, 18. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CMIV30 If this parameter is set, CMI V3.0 configuration is possible whereas CMI V2.3 is not. DB-Initialization: no
Type of Input: single value, 13. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
CONFDSCT In case of a precedence call a special conference disconnect tone is applied. If this switch is not set the old functionality is provided. DB-Initialization: no
Type of Input: single value, 11. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
CONT Controls AMO flow. When CONT=NO an advisory message will be prompted and depending on user entry, the AMO will be cancelled or continued. When CONT=YES is entered the AMO will be started without prompting.
Type of Input: single value, 10. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CTSLMLON ACL-C ConnectTSL service allowed to use the ML classmark.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
CWTPRECT In case of a precedence call a special call waiting tone is applied. If this switch is not set the old functionality is provided. DB-Initialization: no
Type of Input: single value, 10. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
DAJB If this parameter is set, the configuration for AJB is not possible and the old JB settings in branch DSP are used DB-Initialization: no
Type of Input: single value, 6. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
DECTPS Via this parameter the DECT Positioning System (locating of DECT-mobile-phones) will be activated resp. deactivated. DB-Initialization: no
Type of Input: single value, 4. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
DISPCFW Display CFW info at calling party anyway when no DivLeg3 info is received with ALERT.
Type of Input: single value, 6. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DISPMOD Internal number display modificat. for virtual node traffic (DB-Initialization: UNKNOWN)
Type of Input: single value, 25. parameter of a min-1-group
Possible Values: ISDN The display is done in E.164 number format. DB_IN_MOD_ISDN
PRIVATE The display is done in format Private Numbering Plan . " DB_IN_MOD_PRIVATE
UNKNOWN Non VNR: For deactivated vitual numbering (feature VNR) the display of shortest possible subscriber numbers is done VNR: For activated vitual numbering (feature VNR) the display is done in format NODECD + subscriber number DB_IN_MOD_UNKNOWN
DISPPICK If the parameter is set, the old display control (platform H300E IM / H300E UK) wil be activated for call pickup. If the parameter is not set, the HP4000 display control is activated.
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DIVCRDIR ACL divert call request to call director.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DLSACPAS If the parameter is set, bootstrapping without PIN for DLS client is accepted.
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DLSIPADR DLS server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., 1. parameter of a min-1-group
Possible Values: numeric, 0-255
DLSPORT DLS server port (DB-Initialization: 10444)
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: numeric, 0-65535
DMC2400 Used Resource Manager for bandwidth calculation across nodes. Use of a dummy SECNO with 2400 is required.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DNLPTHRL Activation of an additional DNIL path release in VECO.
Type of Input: single value, 21. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DNSIPAD2 DNS server IP address 2 (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
DNSIPADR DNS server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
DOMALLOC An individual service domain is assigned to a non-MLPP call (and over-writes the function of COT:NMLT eventually). This switch is only valid with the FEASU switch MLPP. If this switch is not set a non-MLPP call will stay without a service domain. DB-Initialization: no
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
DOMCHECK Preemption is allowed only within the same service domain. This switch is only valid with the FEASU switch MLPP. If this switch is not set preemption is allowed independent of the service domain. DB-Initialization: no
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
DRLEITNG LED status display at DSS lines DB-Initialization: no
Type of Input: single value, 9. parameter of a min-1-group
Possible Values: NO LED status display at DSS lines FALSE
YES no status display at DSS lines TRUE
DRPS This is a disaster recovery switch.
Type of Input: single value, 16. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DSAALINC If this parameter is set,also incoming calls on secondary lines of keysystems will be displayed.
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DSCPTOS Enable DSCPTOS
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DSNHOTLN Activate the DSN hotline feature.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DTMF2833 Deactivate sending of DTMF via RFC2833 for HFA subscribers.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
DTMFPA If this bit is set the dialed numbers are sent as DTMF signs after CALL_PROCEEDING independent of the selected PROGRESS information. If this bit is NOT set DTMF signs are sent only if the PROGRESS 8 (inband_now_available) or 1 (not_end_to_end_ISDN) was received. DB-Initialization: no
Type of Input: single value, 14. parameter of a min-1-group
Possible Values: NO DTMF signs after CALL_PROCEEDING only if PROGRESS 1 or 8 FALSE
YES Always DTMF signs after CALL_PROCEEDING TRUE
EARLYDMC Early - DMC
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
EDITDIAL If this bit is set, it is possible to dial and edit thedialed digits but no dialing is started by the device. The collection of dialed digits is only possible while on-hooked device (also no dialing tone). DB-Initialization: no
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO Edited dialing not possible FALSE
YES Edited dialing possible TRUE
EXMNTONE Extended tone monitoring
Type of Input: single value, 9. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
EXTSLTMN Extended silent monitoring
Type of Input: single value, 10. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
FCTID function identification for multi function boards
Type of Input: single value, optional
Possible Values: numeric, 0-255
FEANUM The number of the optional feature
Type of Input: single value, mandatory
Possible Values: numeric, 0-2047
FEATLIST Supported OSMO Feature
Type of Input: 1 to 11 single values, concatenated with &, optional
Possible Values: ALL Select all features DB_OSMO_FEAT_ALL
CF Call Forward DB_OSMO_FEAT_CF
CSC Consultation Call DB_OSMO_FEAT_CSC
FC1 Call Forwarding Circuit 1 DB_OSMO_FEAT_FC1
GPC Group Call DB_OSMO_FEAT_GPC
HF Handover From DB_OSMO_FEAT_HF
NONE No feature selected DB_OSMO_FEAT_NONE
SDND Snooze DND DB_OSMO_FEAT_SDND
SEHO Seamless Handover DB_OSMO_FEAT_SEHO
SIP SIP Over Data Connection DB_OSMO_FEAT_SIPDC
SST Single Step Transfer DB_OSMO_FEAT_SST
TOH Not supported DB_OSMO_FEAT_TOH
XA Not supported DB_OSMO_FEAT_XA
FLAGS Which flags should be displayed
Type of Input: single value, optional
Possible Values: ACTFLAGS Displaying only activated flags
ALLFLAGS Displaying all flags
FWDPREC Precedence calls will be forwarded. If this switch is not set precedence calls will not be forwarded. DB-Initialization: no
Type of Input: single value, 6. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
GATEKPR gatekeeper configuration DB-Initialization: yes
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO PBX without gatekeeper FALSE
YES PBX with gatekeeper TRUE
GSCR GSCR Trunk selection method. DB-Initialization: methode1
Type of Input: single value, 12. parameter of a min-1-group
Possible Values: METHODE1 Trunk selection method 1 DB_MLPP_GSCR_SRH_MTH_2
METHODE2 Trunk selection method 2 DB_MLPP_GSCR_SRH_MTH_1
NOMETHOD No method DB_MLPP_GSCR_SRH_MTH_NULL
Default Value: NOMETHOD
H235SEC No longer supported. DB-Initialization: no
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: NO Disable H.235 Security FALSE
YES Enable H.235 Security TRUE
HIMED Allows the usage of the digits *# and ## at the beginning of a dial string in LCR digit analysis for HIMED phones.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
IMPRPKZ " If this parameter is set , both levels of one name key can be chained for PKZ usage. DB-Initialization: no
Type of Input: single value, 10. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
JOURBUSY ACL reports journal entry for busy chief.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
KEYLEN Security Key length (DB-Initialization: 128BIT)
Type of Input: single value, 6. parameter of a min-1-group
Possible Values: 128BIT 128 bit length DB_SEC_KEY_LEN_128_BIT
LAUTHOFF ACD RTOFFs succeed despite of calling STN's LAUTH. DB-Initialization: no
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
LEDSGVCE If this parameter is set the LED signalling (on anate device with LED) will be done only for voice messages but not on call FWDs
Type of Input: single value, 27. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
LICENBL Enables or disables the Multiple Ring Transfer option. DB-Initialization: NO.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
LIST List Option
Type of Input: single value, optional
Possible Values: ALL Displaying all flash board types
CONFIG Displaying only configured flash board types
LOAD Loading of LW
Type of Input: single value, mandatory
Possible Values: LWLOAD LW to be loaded from HD LI_ZED_LW_LOAD
NOLOAD Hard restart without loading/reset of periphery LI_ZED_NO_LOAD
LOADDEV Device the loadware will be loaded from
Type of Input: single value, mandatory
Possible Values: FLASH reset of the forced load DB_FH_FLASH_LOADED
HD forced load for the board DB_FH_FLASH_TO_BE_LOADED
LOGPART Activate Logical Partioning : prevent conference between CO and private trunks.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
LRNGCOFF If the parameter is set, the line appearance specific feature ringer cut off is activated.
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
MCAUSE MUF rules are applying.If this switch is not set the old functionality is provided. DB-Initialization: no
Type of Input: single value, 9. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
MCIQTAC If this switch is set every MLPP level gets an own queue at the Attendant Console. If this switch is not set the old functionality is provided. DB-Initialization: no
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
MHFAM Via this parameter the security settings for Mobile HFA subscriber are controlled. For activated feature SPE only the mode SECURE is allowed.
Type of Input: single value, 8. parameter of a min-1-group
Possible Values: SECURE secure TRUE
STANDARD standard FALSE
Default Value: STANDARD
MIKEYOPT mikey option (DB-Initialization: MIKEY1)
Type of Input: single value, 7. parameter of a min-1-group
Possible Values: MIKEY1 mikey option 1 DB_SEC_MO_MIKEY_1
MRNGXFER Enables or disables the Multiple Ring Transfer option.(More than oneRing Transfer source key are activated on the same device). DB-Initialization: NO.
Type of Input: single value, 23. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
NODDSLAB Hide the display of the key labels for DDS and DSS keys. The change of the currently displayed key labels comes into effect after plugging off/on the device or after a soft restart.
Type of Input: single value, 4. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
NOHOLDT When this switch is on the silent monitoring party (supervisor) hears silence (instead of 'Please hold the line') if the monitored party (agent) is not on the line.
Type of Input: single value, 6. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
NOINTTRS If NOINTTRS is set, then the incoming CO call to party A, which is transferred to internal party B, is not intercepted by Attendant. Party A has NODIV in SDAT. This parameter extends the function of NODIV from SDAT. DB-Initialization: no
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
NOIPBLWL No IP board Loadware Load. When this parameter is set then loadware of gateway IP boards is not loaded by system software.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
NOLABEL Hide the text label of line-key and show only the number, name or text
Type of Input: single value, 4. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
NOLANMON No LAN Monitoring
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: YES
NONPIIW If this parameter is set, transit interworking of numbers from any numbering plan to any other numbering plan is switched off. There is neither interworking from ISDN to PNP, nor from PNP to ISDN, nor from Unknown Numbering Plan to any other nor from any numbering plan to Unknown Numbering Plan. (Note, that Unknown Numbering Plan is normally not used in U.S.) The parameter is used to fulfill the following request: In U.S., ISDN Numbering Plan numbers(E.164) for calling parties received from CO must be sent unchanged to private network lines. This is also requested, when the called party is sent as Private Numbering Plan (PNP) number. Attention: When using this parameter, a PUBNUM handling must be administered for all private extension numbers, that are sent to CO. Otherwise, the private extension number is sent unchanged to CO, that will cause the call be rejected. DB-Initialization: no
Type of Input: single value, 5. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
NOVNIDCO Since HP4K V1.0 AMO KNMAT corrects the virtual node ID to avoid dependences from node to node in different regions. If NOVNIDCO=YES, this behaviour is disabled, what means the KNMAT modification works like HP4K V1.0 before. DB-Initialization: no
Type of Input: single value, 7. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
NPLMSURV If NPLMSURV is set to YES then the traditional IPDA shelves will have an enhanced behavior similar to the Softgate behavior mentioned below. i.e An IPDA shelf in Sigalling survivability will connect to HHS and all other APs which are in a different source group over the alternative route. On the other hand connection to all APs which share the same Source group with the designated Softgate will be established over LAN if possible, and if not, then no connection will be possible. If this parameter is set to NO then we have the same functionality as in versions prior to V5. The old functionality was to use the alternate route to HHS only and try LAN connection to all other APs if possible. If a Softgate is in Signalling survivability, then connection to all other APs which are in a different source group than the designated Softgate, will be over the alternative route. On the other hand connection to all APs which share the same Source group with the designated Softgate will be established over LAN if possible, and if not, then no connection will be possible. Note: Parameter NPLMSURV has no effect on a Softgate which is in Signalling Survivability. SoftGate always follow the enhanced behavior.
Type of Input: single value, 29. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
NVECOSPD VECO speed up with AMO DIAGS is not possible anymore.
Type of Input: single value, 19. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
OCFQDN Online CLA server IP name part 1 (character 129-255)
Type of Input: single value, 2. parameter of a max-1-group
Possible Values: text (case sensitive), up to 128 characters
OCFQDNC Online CLA server name part 2 (character 129-255)
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 127 characters
OCLAADDR Online CLA server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., 1. parameter of a max-1-group
Possible Values: numeric, 0-255
OPTFEA Activate or deactivate the optional features
Type of Input: single value, mandatory
Possible Values: A activate TRUE
D deactivate FALSE
Default Value: D
ORIGDNI If the parameter is YES on the calling party Display only the originaly dialed DNI number will be displayed and it will not be updated later after routing the call to an agent.
Type of Input: single value, 7. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
OSVTLS OSV level of certificate security check
Type of Input: single value, optional
Possible Values: numeric, 0-1
PARTNO part number of board to be set / reset
Type of Input: single value, optional
Possible Values: text, up to 10 characters
PFQDN Online Proxy server IP name part 1 (character 129-255)
Type of Input: single value, 2. parameter of a max-1-group
Possible Values: text (case sensitive), up to 128 characters
PFQDNC Online Proxy server name part 2 (character 129-255)
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 127 characters
PINDISP Display PIN-subscriber as called party instead of PUG member to all other PUG members.
Type of Input: single value, 9. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
PIT pit task
Type of Input: single value, mandatory
Possible Values: HRBHV Hard Restart Behaviour
LWSRC flash memory to be loaded
PNTTGLE A signalling tone is done when toggling back to a preemted held partner. If this switch is not set there will be no signalling tone. DB-Initialization: no
Type of Input: single value, 8. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
PORT1 Server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
PORT2 Server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
PORT3 Server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
PORT4 Server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
PORT5 Server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
PROTDSS Prevent DSS-keys from being modified by user.
Type of Input: single value, 10. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
PROXYIP Online Proxy server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., 1. parameter of a max-1-group
Possible Values: numeric, 0-255
PROXYPAS Online Proxy Password (character 1-40)
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 40 characters
PROXYPRT Online Proxy server port (DB-Initialization: 0)
Type of Input: single value, optional
Possible Values: numeric, 0-65535
PROXYUSR Online Proxy User Name (character 1-40)
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 40 characters
PSEPDIAL If this parameter is set, It is possible to post dial a station number with impulse dial after dialing the PSE accesscode and the beeper number i.e. DTMF post dial will not work. DB-Initialization: no
Type of Input: single value, 12. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
QOSVIDEO Value of QoS Video DSCP
Type of Input: single value, optional
Possible Values: numeric, 0-254
RECALLCO If the parameter is set, a recall to the attendant after call transfer to the (CO) is possible. DB-Initialization: no
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
RECCOMPN If the parameter is set, an access code specific company name will be displayed in case of a recall to the attendant. During default settings (parameter not set), the company name is derived from the ITR group of the called party. DB-Initialization: no
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
RTOFFOLD If this parameter is set, the system uses ACD to route offsite to old system versions equal or smaller than EV3.0
Type of Input: single value, 4. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
SBCADDR1 Server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
Default Value: 0.0.0.0
SBCADDR2 Server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
Default Value: 0.0.0.0
SBCADDR3 Server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
Default Value: 0.0.0.0
SBCADDR4 Server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
Default Value: 0.0.0.0
SBCADDR5 Server IP address (DB-Initialization: 0.0.0.0)
Type of Input: 4 single values, concatenated with ., optional
Possible Values: numeric, 0-255
Default Value: 0.0.0.0
SBCFQDN1 Fully Qualified Domain Name (DB-Initialization: )
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 64 characters
Default Value:
SBCFQDN2 Fully Qualified Domain Name (DB-Initialization: )
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 64 characters
Default Value:
SBCFQDN3 Fully Qualified Domain Name (DB-Initialization: )
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 64 characters
Default Value:
SBCFQDN4 Fully Qualified Domain Name (DB-Initialization: )
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 64 characters
Default Value:
SBCFQDN5 Fully Qualified Domain Name (DB-Initialization: )
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 64 characters
Default Value:
SBCSTLS SBCS level of certificate security check
Type of Input: single value, optional
Possible Values: numeric, 0-1
SCALLOG Source number in call log
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO Current call log functionality. After transfer the attendantnumber (B party) is entered to the call log of C party " (DB-Initialization) FALSE
YES After transfer the caller number (A party) is entered to the call log of C party TRUE
SECIPSB Default security level for IP subscribers
Type of Input: single value, 4. parameter of a min-1-group
Possible Values: CIPHER cipher(HFA) DB_SPE_SEC_LEV_CIPHER
SECURE secure DB_SPE_SEC_LEV_SECURE
STANDARD standard(SIP) DB_SPE_SEC_LEV_STANDARD
Default Value: SECURE
SECIPTR Default security level for IP Trunks
Type of Input: single value, 5. parameter of a min-1-group
Possible Values: EXTSECUR extsecure DB_SPE_SEC_LEV_EXTSEC
SECURE secure DB_SPE_SEC_LEV_SECURE
STANDARD standard DB_SPE_SEC_LEV_STANDARD
TRADITIO traditional DB_SPE_SEC_LEV_TRADITIONAL
Default Value: SECURE
SECLVDSP If this parameter is set, the call security level is displayed for each subscriber.
Type of Input: single value, 9. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
SECOSBC Media Security Mode SBC
Type of Input: single value, optional
Possible Values: BESTEFRT Best effort DB_OSMO_SEC_BESTEFFORT
NONE NONE DB_OSMO_SEC_NONE
RTP RTP DB_OSMO_SEC_RTP
SRTP SRTP DB_OSMO_SEC_SRTP
Default Value: BESTEFRT
SECOSV Media Security Mode OSV
Type of Input: single value, optional
Possible Values: BESTEFRT Best effort DB_OSMO_SEC_BESTEFFORT
NONE NONE DB_OSMO_SEC_NONE
RTP RTP DB_OSMO_SEC_RTP
SRTP SRTP DB_OSMO_SEC_SRTP
Default Value: BESTEFRT
SECTDMSB Default security level for TDM subscribers
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: SECURE secure DB_SPE_SEC_LEV_SECURE
TRADITIO traditional DB_SPE_SEC_LEV_TRADITIONAL
Default Value: TRADITIO
SECTDMTR Default security level for TDM Trunks
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: EXTSECUR extsecure DB_SPE_SEC_LEV_EXTSEC
TRADITIO traditional DB_SPE_SEC_LEV_TRADITIONAL
Default Value: TRADITIO
SEPHOTLN Separate data and voice hotline
Type of Input: single value, 13. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
SERVMAIL Customer service email.
'******' delete the email address.
Type of Input: single value, optional
Possible Values: text (case sensitive), up to 64 characters
Default Value:
SILMON If this parameter is set, the silent monitoring is restricted to members of the ACD group of the monitor only. If this parameter is not set, there exist no restrictions to any ACD groups. DB-Initialization: no
Type of Input: single value, 11. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
SIPDIAL This parameter activates the prepared dialing (block dialing) function according to the SIP phone user interface on HP8k.
Type of Input: single value, 28. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
SNGLBTN Activate mail server (Xpressions) access via OpenStage envelope key as single button operation
Type of Input: single value, 7. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
SPESUPP If the parameter is set, SPE is enabled.
Type of Input: single value, 1. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
SPS This parameter activates the feature Signalling & Payload Seperation.
Type of Input: single value, 30. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
STMIPRES If the parameter STMIPRES set,no broadcast is routed via HHS. Note: YES means NO STMI PRESENT!
Type of Input: single value, 22. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: YES
STRNAME Street Name of the Emergency Address
Type of Input: single value, optional
Possible Values: text, 1 to 21 characters
STRNUM Street Number of the Emergency Address
Type of Input: single value, optional
Possible Values: text, 1 to 5 characters
SUPDRCPK The menu item Directed Call Pickup " shall be removed from dialog menu if this parameter is set. DB-Initialization: no
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
SUPRDND Remove menu item Do Not Disturb.
Type of Input: single value, 11. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
TYPE Desired system option
Type of Input: single value, mandatory (CHANGE / DISPLAY)
single value, optional (REGENERATE)
Possible Values: ACD Settings for ACD-G
ACL Settings for ACL related functions
ADDR Settings for ACL related functions (CHANGE)
ADDR address (DISPLAY / REGENERATE)
ALLDATA all system data
ALLDATA2 all system data 2
ATND settings for attendant console
DLS Settings for DLS
DMC Settings for dmc connections
DNS Settings for dns
KEYSYS Settings for Key System
LICDATA Settings for CLA data (CHANGE / DISPLAY)
LICDATA settings for CLA (REGENERATE)
LOADBHV Load behaviour (CHANGE / DISPLAY)
MLPP Multi-Level Precedence and Preemption Service
ONLIC Online Licensing via Cloud settings
OPTFEA Settings of optional features
OPTISET settings for optiset devices
OSMO OSMO (CHANGE)
OSMO OSMO feature (DISPLAY)
OSMO osmo (REGENERATE)
SECURITY Settings for security
USEONLIC Enables or disables the 'Online Licensing' option. DB-Initialization: NO.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
USEPROXY Enables or disables the 'Use Proxy' option. DB-Initialization: NO.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
USERBUSY Release cause is USER-BUSY when ACD disconnects calls.
Type of Input: single value, 3. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
USESGLIC Enables or disables the 'Online Licensing for SG and EntGW' option. DB-Initialization: NO.
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
USMUDIV Precedence calls will be diverted on MUF rules. If this switch is not set the old functionality is provided DB-Initialization: no
Type of Input: single value, 4. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
USMUXFER Precedence levels will be updated on MUF rules. If this switch is not set the precedence levels will be updated on MLPP rules. DB-Initialization: no
Type of Input: single value, 5. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
VCPRIO1 WIFI Video Codec Priority List
Type of Input: single value, optional
Possible Values: H264 H264 codec DB_OSMO_VCDC_H264
UNDEF Undefined DB_OSMO_VCDC_NONE
VP8 VP8 codec DB_OSMO_VCDC_VP8
Default Value: Undef
VCPRIO2 WIFI Video Codec Priority List
Type of Input: single value, optional
Possible Values: H264 H264 codec DB_OSMO_VCDC_H264
UNDEF Undefined DB_OSMO_VCDC_NONE
VP8 VP8 codec DB_OSMO_VCDC_VP8
Default Value: Undef
VECOSSPD VECO super speed up - designed for usage in the lab only, do never activate a customer switch !!!
Type of Input: single value, 20. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
VNR Virtual numbering
Type of Input: single value, 24. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
VNRCN VNR Closed Numbering (DB-Initialization: NO)
Type of Input: single value, 31. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
VNRDNO VNR Display Node Number (DB-Initialization: NO)
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
WHISANN If this parameter is set, the ACD-G feature Whisper Announcement will be activated. (DB-Initialization: NO)
Type of Input: single value, 2. parameter of a min-1-group
Possible Values: NO no FALSE
YES yes TRUE
WMM Enable Wireless Multi Media
Type of Input: single value, optional
Possible Values: NO no FALSE
YES yes TRUE
Default Value: NO
ZIPCODE ZIP Code of the Emergency Address
Type of Input: single value, optional
Possible Values: text, 1 to 5 characters

Error Messages

F01
F01: THERE IS AT LEAST ONE SLC BOARD CONFIGURED FOR @@@@@@@@.
     PLEASE DELETE FIRST ALL CONFIGURED SLC BOARDS (DEL-BCSU).
F02
F02: VNR MUST NOT BE ACTIVATED, IF SEVEN DIGITS NUMBERING IS ACTIVE
     (PARAMETER SEVDIG IN AMO ZAND:TYPE=ALLDATA).
F03
F03: VNR MUST NOT BE SWITCHED, WHEN VIRTUAL NODES ARE ASSIGNED (AMO KNDEF).
F04
F04: SPESUPP CANNOT BE SWITCHED OFF IF SIGNENCR IS ACTIVATED.
     PLEASE CHECK VIA DISPLAY-SIPCO:SECURITY;
F05
F05: VNRCN CAN BE SET TO YES ONLY IF VNR = YES.
F06
F06: CREATION OF SEGMENT FAILED WITH STATUS @@@@@@@@@@H
F07
F07: LOADING SUBSYSTEM UBGDAT00 NOT POSSIBLE
F08
F08: BOARD WITH PART NUMBER @@@@@@@@@@ IS NOT A FLASH BOARD
F09
F09: FUNCTION IDENTIFICATION @@@ INVALID
F10
F10: CHANGE OF THE SWITCH  'LOAD FLASH MEMORY' FOR NCUI NOT ALLOWED
F11
F11: THE ENTERED BOARD IS NOT CONFIGURED IN THE SYSTEM.
F12
F12: BOARD PART NUMBER @@@@@@@@@@ INVALID
F13
F13: FCTID HAS TO BE ENTERED TOGETHER WITH PARTNO.
F14
F14: FLASH HANDLING NOT YET FINISHED, 
     AT THE MOMENT THERE IS NO CHANGE/DISPLAY POSSIBLE.
     PLEASE WAIT UNTIL FLASH HANDLING IS FINISHED.
     (HISTA F4266: "CHANGE/DISPLAY OF LOADBHV IN AMO ZANDE NOW POSSIBLE")
     THIS CAN TAKE SOME MINUTES
F15
F15: VNR MUST NOT BE SWITCHED, WHEN DIALING CODES ARE CONFIGURED 
     (AMO WABE).
F16
F16: IN STRNUM, ALL CHARACTERS EXCEPT THE LAST ONE HAVE TO BE NUMERIC.
F17
F17: FOR STRNUM, MAX. 4 DIGITS + 1 OPTIONAL ALPHABETIC CHARACTER CAN
     BE ENTERED. ONLY THE LAST CHARACTER CAN BE ALPHABETIC.
F18
F18: ZIPCODE VALUE MUST BE NUMERIC.
F19
F19: EITHER SBCFQDN/PORT OR IP ADDRES/PORT PAIR MAY BE SPECIFIED.
     SBCFQDN AND SBCADDR ARE NOT ALLOWED AT THE SAME TIME.
F20
F20: SPACES ARE NOT ALLOWED IN SBCFQDN OR SERVMAIL PARAMETER.
F21
F21: ALL/NONE VALUE MUST BE ALONE IN FEATURE LIST.
F22
F22: NO MEMORY FOR AP16, INCREASE BY ADD-DIMSU:AP=
F23
F23: CLA DESTINATION MISSED
F24
F24: SPESUPP CANNOT BE SWITCHED ON IF NON PAYL. ENCR. IS ACTIVATED IN LICENSE.
     PLEASE CHECK VIA DISPLAY-CODEW;

Advisory Messages

USSU"> EXEC-USSU
     EXEC-USSU:UPDATAP,@@@;
BSSU "> PLEASE RESET THE FOLLOWING CGW BOARDS BY MEANS OF RESTART-BSSU 
     PLEASE RESET THE FOLLOWING CGW BOARDS BY MEANS OF RESTART-BSSU :
USSU "> PLEASE RESET THE FOLLOWING NCUI BOARDS BY MEANS OF EXEC-USSU 
     PLEASE RESET THE FOLLOWING NCUI BOARDS BY MEANS OF EXEC-USSU :
BSSU"> RESTART-BSSU
     RESTART-BSSU:PEN,1,@@@,@@@;
H02
H02: A CHANGE OF THE GATEKEEPER SWITCH AFTER CONFIGURATION OF THE GATEKEEPER OR
     HG 3550 GATEWAY(S) CAN RESULT IN MAJOR PROBLEMS IN OPERATION. DO YOU REALLY
     WANT TO CONTINUE (YES / NO):
H03
H03: THE ALTERNATIVE COUNTRY CODE HAS BEEN DELETED, CHECK IF COT=CACO
     IS STILL USED FOR TRUNKS
H04
H04: PARAMETER ALTCC CAN TAKE ONLY NUMERIC VALUES .
     * SETS THE PARAMETER TO THE DB INITIALIZATION VALUE,
     #,A-D ARE NOT VALID AND WILL BE IGNORED.
H05
H05: CHANGING THE FLAG VNR HAS A BIG INFLUENCE OF COMPLETE SUBSCRIBER
     CONFIGURATION. THIS CAN LEAD TO BIG TROUBLES LATER.
     ARE YOU REALLY SURE ?
H06
H06: THE CHANGE OF PARAMETER SPESUPP DOES NOT TAKE EFFECT ON WHOLE SYSTEM
     UNLESS THE SYSTEM IS RESTARTED VIA COMMAND:
     EXEC-REST:UNIT,BP,HARD; 
     (ON DUPLEX SYSTEMS BOTH PROCESSORS SIMULTANEOUSLY!!)
H07
H07: THE CHANGE OF DLS OR DNS SETTINGS DOES NOT TAKE EFFECT ON CGW AND NCUI 
     BOARDS USING DEFAULT DLS SETTINGS UNLESS THE BOARDS ARE RESTARTED.
H08
H08: SECIPSB=@@@@@@@@ CAN ONLY SERVE AUTOMATIC GENERATION OF @@@
     SUBSCRIBERS: FOR ALL @@@ SUBSCRIBERS THE SECURITY CLASS MUST BE
     ADJUSTED BY MEANS OF AMO-SDAT.
H09
H09: THE CHANGE OF PARAMETER CLIPTRNK DOES NOT TAKE EFFECT ON TRUNK BOARDS
     UNLESS THOSE BOARDS ARE RESTARTED BY MEANS OF AMO BSSU OR DSSU.
H10
H10: SECURITY MODE FOR MOBILE HFA AUTOMATICALLY SET TO SECURE.
H11
H11: ATTENTION ! SECURITY MODE FOR MOBILE HFA REMAINS SECURE.
H12
H12: MHFAM=STANDARD IS NOT ALLOWED WHILE FEATURE SPE IS ACTIVATED.
H13
H13: THIS CHANGE NEEDS A RESET OF ALL SUBSCRIBERS WITH ACTIVATED
     SDAT ATTRIBUTE SECLVDSP.
     IN CASE OF PARAMETER CONT IS YES, ALL CONCERNED SUBSCRIBERS WILL BE RESET
     AUTOMATICALLY. 
     IN CASE OF PARAMETER CONT IS NO, EACH CONCERNED SUBSCRIBER HAS TO BE RESET
     MANUALLY BY MEANS OF RES-DSSU:PEN,...
H14
H14: By setting the parameter USERBUSY=YES it is strongly recommended to set
     AMO-TDCSU parameter SRCHMODE=CIR for all outgoing trunks.
     See also service handbook.
H15
H15: PLEASE BE AWARE HFA PHONES USING TLS IN AN IPDA SHELF WILL NOT BE ABLE TO
     LOG ON UNLESS SECURITY IS ALSO ACTIVATED FOR THE IPDA SHELF
     (SIPCO:IPDAENCR).
H16
H16: AMO ZANDE:SPS IS SET TO YES.  IF A HUNT GROUP IS TO BE REACHED VIA THIS 
     CONFIGURATION AMO SA:LVAFTEXT MUST BE SET TO NO.
H17
H17: THE OPTIONAL FEATURE IS ALREADY ACTIVATED.
H18
H18: THE OPTIONAL FEATURE IS ALREADY DEACTIVATED.
H19
H19: SAVE CHANGES OF ACTIVATION-FLAGS WITH 'EXEC-UPDAT:BP'.
H20
H20: CHANGES ARE MADE FOR BOARD @@@@@@@@@@ with fctid @@
H21
H21: HPA as well as the corresponding classic board are displayed 
     in the list even if only one of them is configured.
H22
H22: Changes are made for HPA Board @@@@@@@@@@ with fctid @@ and
     corresponding classic Board @@@@@@@@@@ with fctid @@
H23
H23: ATTENTION! IF PARTNO AND FCTID ARE NOT ENTERED ALL CONFIGURED 
     FLASH BOARDS WILL BE AFFECTED! ARE YOU SURE? (YES/NO) :
H24
H24: After hardrestart / reload, the values for LWSRC and HRBHV
     will be set back to default FLASH / NOLOAD.
H25
H25: NOT USED FLAGS ARE ONLY DISPLAYED IF ACTIVE.
H26
H26: FQDN PART1 MISSED, CONTINUATION IGNORED.
H27
H27: Feature H.235 Security is no longer supported
H28
H28: CONFIGURATION WILL COME INTO EFFECT AFTER 
     SG/ENTGW RESTART OR SYSTEM RELOAD
H29
H29: TOH & XA ARE NOT SUPPORTED.
H30
H30: ONLIC CONFIGURATION HAVE BEEN LOADED TO SG/ENTGW @@.