SA - Hunting arrangements

By means of AMO SA, all terminals, with the exception of attendant consoles, can be combined into a hunting group . The number of possible hunting groups in the system is defined by means of AMO DIMSU.

There are two types of hunting groups:

pilot hunting group:
This hunting group is reached via a special hunting group access code (e.g., 6). The digit evaluation result "HUNT" is created for this access code by means of AMO WABE

Master SA:
The STNO of the SA is the same as that of the first terminal in the hunting group. This terminal cannot be removed from the SA, but it can temporarily deactivate itself from the hunting group, as can any other station. If call forwarding is activated for the first terminal in the master SA, the entire hunting group is forwarded. A master can only act as a master in his own hunting group, it can however be a member in other hunting groups.

The STYPE parameter is used to select the type of search operation (cyclical or linear). In the case of cyclical search operations, all stations in a hunting group are seized one by one, and only then does the search start again at the beginning. In the case of linear search operations, an attempt is made to seize the first station in the hunting group.

Every terminal can only be member of a hunting group once, it may however be set up in several hunting groups.

Master of a hunting group cannot be master or member of an ONS group. In addition, member of a hunting group cannot be member of an ONS group, whereas member of a hunting group can be master of an ONS group.

Functional terminals on the S0 bus which are members in a hunting group must be deactivated from the hunting group before being decoupled from the bus.

For functional hunting group members the COSSU authorization MULTRA must not be set.

In the case of the non-voice services (FAX, DTE), a check is made to determine if the specified station number points to the device associated with that station. This means that no station STNOs are created in the hunting group that point to a terminal other than their own. These STNOs are created by means of AMO TGER.

In case of voice hunting groups the station number (22 digits) is not checked. Any external access code can be entered as a member to a voice hunt group.

The sequence of members in the hunting group is identical to the sequence in the ADD command. A maximum of 10 station numbers can be processed at one time for each ADD command. If the hunting group is to include more than 10 STNOs, the previously created hunting group can be expanded to include an additional 10 STNOs by means of an other ADD command (type STN). This can be repeated as often as desired. If one or more terminals are to be added to an existing hunting group, the parameter "POS" can be used to indicate where in the hunting group the new terminals are to be inserted.

The association of the individual members of the hunting group with an ITR (internal traffic relation / closed user) group is not checked when the hunting group is created.

If all the terminals of a hunting group are seized, it is possible to create a call queuer for voice (parameter CQMAX), and thus an overflow to the voice mail server (MBNO).

Voice hunting group: By means of the parameter "CQMAX", the dimensions the call queuer in this hunting group (maximum number of internal and external calls) can be defined. The overall capacity of all call queuers is defined in AMO DIMSU.
The calls are entered into the call queuer according to priority and all calls with the same priority are entered in the order in which they are received. The priority cannot be changed using this AMO. The order of priority is normally as follows:

Emergency calls,

CO calls,

Tie-line calls,

Internal calls.

By means of the parameter "DISPTYPE", the following options are possible for number displayed at partner station:

EXT - Member number (extension) is displayed at partner for incoming calls to hunt group

HT - Hunt group number is displayed at partner for incoming calls to hunt group

HTLOGD - Hunt group number is displayed at partner for incoming hunt group calls (the same as for value HT). Hunt group number is also displayed at partner for outgoing calls initiated by switched in members.

HTALL - Hunt group number is displayed at partner for incoming hunt group calls (the same as for value HT). Hunt group number is also displayed at partner for outgoing calls initiated by all members (switched in or switched out members).

Note: HTLOGD and HTALL values applies only for unique members (i.e. the member is part of a single hunt group). AMO SA resricts configuration of HTLOGD and HTALL with F73 error message.

If newly arriving calls to a full call queuer are not to be rejected, the AMO SA, parameter OVFLDEST can be used to create an ovelflow destination. Overflow destination can be:

a 22-digit extension

external VMS or

or Phonemail.

No overflow can be created for the non voice services.

Virtual node number (NNO) used for number modification:

It is possible to add a NNO or to change one NNO to another (for voice services).
If NNO is not present for ADD, then:

for PILOT HUNT GROUP: the default virtual node is set as hunt group node number;

for MASTER HUNT GROUP: the virtual node of the master station as hunt group virtual node number
(it does not change if master station node changes).

The virtual node id can contain max. 3 levels:

Form: <level2>-<level1>-<level0> (e.g. 1-2-3 or 3-15 or 222).

Levels have to be filled from low to high (e.g not allowed 1-0-12 or 1-0-0).

Possible Values: level2: 0-29, level1: 0-253, level 0: 1-999.

Notes A hunt group access code which is to be reached under several STNOs can be duplicated from an existing STNO onto a new STNO by means of a special create command (TYPE= DUPL) if the digit analysis result (DAR) "HUNT" is set for the same DPLN and CPSs (Call progress state) for both of the STNOs.

Cross Reference to Other AMOs:

AMO DIMSU	:	Feature capacities
AMO FEASU	:	Features (bit string) in the SWU
AMO SCSU, SBCSU	:	Station configuration in the SWU

Destination Processor: BP (Switching Unit)

Functions

ADD	Create a hunting group	password class 2
DELETE		password class 2
CHANGE	Change a hunting group	password class 2
DISPLAY		password class 0
REGENERATE	Regenerate a hunting group	password class 2

Procedure Overview

ADD-SA

ADD-SA

TYPE=VCE,CD=<key-num>, [DPLN=<number>], [CPS=<number>], [ITR=<number>], [STNO=<key-num>], STYPE=<param>, [CQMAX=<number>], [NAME=<string>], [FNA=<param>], [VARCQ=<param>], [CSANS=<param>], [LVAFTEXT=<param>], [EXECCFW=<param>], [OVFLCYCL=<param>], [LSTMBOFF=<param>], [BUSYCOND=<param>], [FOLFWBSY=<param>], [DISPTYPE=<param>],

[OVFLDEST=NONE],[NNO=<number>];

[OVFLDEST=DESTEXT],NUMBER=<key-num>, [NNO=<number>];

[OVFLDEST=VMSNW],NUMBER=<key-num>, [NNO=<number>];

[OVFLDEST=PHONMAIL],NUMBER=<key-num>, [NNO=<number>];

TYPE=FAX,CD=<key-num>, [DPLN=<number>], [CPS=<number>], [ITR=<number>], [STNO=<key-num>], STYPE=<param>, [NAME=<string>], [DISPTYPE=<param>];

TYPE=DTE,CD=<key-num>, [DPLN=<number>], [CPS=<number>], [ITR=<number>], [STNO=<key-num>], STYPE=<param>, [NAME=<string>], [DISPTYPE=<param>];

TYPE=STN,CD=<key-num>, [DPLN=<number>], [CPS=<number>], SVC=<param>, STNO=<key-num>, [POS=<number>];

TYPE=DUPL,CDOLD=<key-num>, [DPLN=<number>], [CPS=<number>], CDNEW=<key-num>;

The following can be carried out by means of this function:

A new hunting group of the type "voice" can be created (for an existing SA route, it is entered into all duplicated routes);

A new hunting group of the type FAX or DTE can be created (for an existing SA route, it is entered into all duplicated routes);

An existing hunting group can be expanded to include new members (is automatically expanded in all duplicated routes);

An existing hunting group route can be duplicated from one STNO to another (only for pilot hunting group).

Examples

Create: master hunting group with the STNO 2103, service voice, stations 2100-2101, STYPE=LIN with call queuer capacity of 20 stations.

Input:
```
ADD-SA:VCE, 2103 , 0, ,, 2100&2101, LIN, 20, ,; 
```

Duplicate the hunting group having STNO *21 at *3.
Input:
```
ADD-SA:TYPE=DUPL,CDOLD=*21,CDNEW=*3;
```

DELETE-SA

DELETE-SA
		TYPE=HT,CD=<key-num>, [DPLN=<number>], [CPS=<number>], [ITR=<number>], SVC=<param>;
		TYPE=STN,CD=<key-num>, [DPLN=<number>], [CPS=<number>], SVC=<param>, STNO=<key-num>;
		TYPE=NAME,CD=<key-num>, [DPLN=<number>], [CPS=<number>];
		TYPE=CD,CD=<key-num>, [DPLN=<number>], [CPS=<number>];

The following can be deleted:

a hunting group for a service (all duplicate hunting groups will be deleted automatically);

members can be deleted from a hunting group for a specific service (they will be deleted automatically from all duplicate hunting groups);

the name of a hunting group (will be automatically deleted from all duplicate hunting groups);

all hunting groups for the specified station number for all services (e.g. 3 hunting groups have been set up for STNO=*73, one each for VCE and FAX).

CHANGE-SA

CHANGE-SA

TYPE=HT,CDOLD=<key-num>, [DPLN=<number>], [CPS=<number>], CDNEW=<key-num>;

TYPE=TYPE,CD=<key-num>, [DPLN=<number>], [CPS=<number>], [ITR=<number>], SVC=<param>, {(min 1) STYPE=<param>, FNA=<param>, VARCQ=<param>, CSANS=<param>, DISPTYPE=<param>, LVAFTEXT=<param>, EXECCFW=<param>, OVFLCYCL=<param>, LSTMBOFF=<param>, BUSYCOND=<param>, FOLFWBSY=<param>};

TYPE=NAME,CD=<key-num>, [DPLN=<number>], [CPS=<number>], NAME=<string>;

TYPE=CQMAX,CD=<key-num>, [DPLN=<number>], [CPS=<number>], CQMAX=<number>;

TYPE=OVFLDEST,CD=<key-num>, [DPLN=<number>], [CPS=<number>],

OVFLDEST=NONE;

OVFLDEST=DESTEXT,NUMBER=<key-num>;

OVFLDEST=VMSNW,NUMBER=<key-num>;

OVFLDEST=PHONMAIL,NUMBER=<key-num>;

TYPE=NNO,CD=<key-num>, [DPLN=<number>], [CPS=<number>], [NNO=<number>];

CHANGE-SA has the following functions:

Changing the station number of the hunting group;
In the case of a master hunting group, only the hunting group station number can be changed.
If the user wants to change a master into a code hunting group, he must first delete the master and then add the code hunting group.
In addition to this, the following should be noted when changing the station number of a hunting group: the new code must have the same DPLN (WABE) group and the same CPS distribution as the old code. (DISPLAY-WABE).

Change the Search type for any service (automatically applies for all duplicated routes )

Change the name (is also carried out in all duplicated routes)

Change the call queuer capacity for the service "voice" (automatically applies for all duplicated routes)

Change the overflow destination for the service "voice" (automatically applies for all duplicated routes).

Change the NNO for the service "voice" (automatically applies for all duplicated routes).

DISPLAY-SA

DISPLAY-SA

[CD=<key-num>], [DPLN=<number>], [SVC=<param>], [STNO=<key-num>], [OVERFLOW=<param>], [FORMAT=<param>], [ACLHGNO=<number>];

The hunting groups and all their associated data can be interrogated according to the DPLN and the service, or a member of the hunting group can be interrogated, or the interrogation can be made according to a combination of the 6 parameters. When SA routes are duplicated, their access codes are also output when the data for the first STNOs are output. The FORMAT parameter can be used to specify the Desired output format. If FORMAT=GR, the device search data MG (master group) and SG (subgroup) will be output for traffic metering purposes.

Example

Interrogate all existing hunting groups valid for all DPLN groups.

Input:

DISPLAY-SA:;

Output:

 H500:  AMO SA    STARTED
 +------------------------------------------------------------------------------+
 | STATION HUNTING FOR ALL DPLN                              SERVICE  = VCE     |
 +------+-----------------+---+-------------------------------------------------+
 |  CD  |NAME AND         |TYP|                                                 |
 |      |CALL PROG. STATE | | |                                                 |
 |      |                 |L|C|                                                 |
 |      |          1 111 2|I|Y|                                                 |
 |      |12345 67890 123 2|N|C|                                                 |
 +------+-----------------+---+-------------------------------------------------+
 |*550  |.**** ***** **. *|*| | STNO :                                          |
 |      |                 | | |                   3156,                  3157   |
 |      |                 | | | CQMAX :       5       FNA: Y      VARCQ: N      |
 |      |                 | | | CSANS: N          LVAFTEXT: Y                   |
 |      |                 | | | EXECCFW:   N      OVFLCYCL: N                   |
 |      |                 | | | LSTMBOFF:  N                                    |
 |      |                 | | | OVERFLOW : -                                    |
 |      |                 | | | NNO : 11-222-333                                |
 +------------------------------------------------------------------------------+
 | STATION HUNTING FOR ALL DPLN                              SERVICE  = FAX     |
 +------+-----------------+---+-------------------------------------------------+
 |  CD  |NAME AND         |TYP|                                                 |
 |      |CALL PROG. STATE | | |                                                 |
 |      |                 |L|C|                                                 |
 |      |          1 111 2|I|Y|                                                 |
 |      |12345 67890 123 2|N|C|                                                 |
 +------+-----------------+---+-------------------------------------------------+
 |2107  |.**** ***** **. *| |*| STNO :                                          |
 |      |                 | | |                   2107,                  2106   |
 |      |                 | | | DISPTYPE:   EXT                                 |
 |      |                 | | |                                                 |
 |*550  |.**** ***** **. *|*| | STNO :                                          |
 |      |                 | | |                   2106,                  2107   |
 |      |                 | | | DISPTYPE:   EXT                                 |
 +------------------------------------------------------------------------------+
 | STATION HUNTING FOR ALL DPLN                              SERVICE  = DTE     |
 +------+-----------------+---+-------------------------------------------------+
 |  CD  |NAME AND         |TYP|                                                 |
 |      |CALL PROG. STATE | | |                                                 |
 |      |                 |L|C|                                                 |
 |      |          1 111 2|I|Y|                                                 |
 |      |12345 67890 123 2|N|C|                                                 |
 +------+-----------------+---+-------------------------------------------------+
 |*550  |.**** ***** **. *|*| | STNO :                                          |
 |      |                 | | |                   2104,                  2105   |
 |      |                 | | | DISPTYPE:   EXT                                 |
 +------+-----------------+-+-+-------------------------------------------------+
 AMO-SA   -111       HUNTING ARRANGEMENTS
 DISPLAY COMPLETED;

Interrogate all master- and subgroups of all existing hunting groups for traffic metering.

Input:

DISPLAY-SA:FORMAT=GR;

Output:

 H500:  AMO SA    STARTED
 +------------------------------------------------------------------------------+
 | STATION HUNTING FOR ALL DPLN                               SERVICE = VCE     |
 +------+-----------------+---+------+------------------------------------------+
 |  CD  |CALL PROG. STATE |TYP|  MG  | SG                                       |
 |      |                 |L|C|      |                                          |
 |      |          1 111 2|I|Y|      |                                          |
 |      |12345 67890 123 2|N|C|      |                                          |
 +------+-----------------+-+-+------+------------------------------------------+
 |*550  |.**** ***** **. *|*| |   29 |                                          |
 |      |                 |   |      |   43                                     |
 |      |                 | | | ACLHGNO:    138                                 |
 +------------------------------------------------------------------------------+
 | STATION HUNTING FOR ALL DPLN                               SERVICE = FAX     |
 +------+-----------------+---+------+------------------------------------------+
 |  CD  |CALL PROG. STATE |TYP|  MG  | SG                                       |
 |      |                 |L|C|      |                                          |
 |      |          1 111 2|I|Y|      |                                          |
 |      |12345 67890 123 2|N|C|      |                                          |
 +------+-----------------+-+-+------+------------------------------------------+
 |2107  |.**** ***** **. *| |*|   26 |                                          |
 |      |                 |   |      |   40                                     |
 |      |                 | | | ACLHGNO:    143                                 |
 |      |                 | | |      |                                          |
 |*550  |.**** ***** **. *|*| |   28 |                                          |
 |      |                 |   |      |   42                                     |
 |      |                 | | | ACLHGNO:    141                                 |
 +------------------------------------------------------------------------------+
 | STATION HUNTING FOR ALL DPLN                               SERVICE = DTE     |
 +------+-----------------+---+------+------------------------------------------+
 |  CD  |CALL PROG. STATE |TYP|  MG  | SG                                       |
 |      |                 |L|C|      |                                          |
 |      |          1 111 2|I|Y|      |                                          |
 |      |12345 67890 123 2|N|C|      |                                          |
 +------+-----------------+-+-+------+------------------------------------------+
 |*550  |.**** ***** **. 2|*| |   27 |                                          |
 |      |                 |   |      |   41                                     |
 |      |                 | | | ACLHGNO:    142                                 |
 +------+-----------------+-+-+------+------------------------------------------+
 AMO-SA   -111       HUNTING ARRANGEMENTS
 DISPLAY COMPLETED;

REGENERATE-SA

REGENERATE-SA

[CD=<key-num>];

Example

Input:

REGENERATE-SA:;

Output:

 ADD-SA:FAX,2107,,,,2106,CYC,,;
 ADD-SA:VCE,*550,,,,3156&3157,LIN,5,,,,,,,,,,,EXT,NONE,1-1-847;
 ADD-SA:VCE,*551,,,,3158&3159,LIN,0,,,,,,,,,,,EXT,DESTEXT,3100,1-1-847;
 ADD-SA:FAX,*550,,,,2106&2107,LIN,,;
 ADD-SA:DTE,*550,,,,2104&2105,LIN,,;

Parameter description

ACLHGNO	ACL hunt group number
	Type of Input:	single value, optional
	Possible Values:	numeric, 0-65535
BUSYCOND	Busy Condition of the parallel ringing hunt group
	Type of Input:	single value, 10. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	ALL	All Busy	FALSE
	Possible Values:	ONE	One Busy	TRUE
	Default Value:	ALL
CD	Hunting group access code
	Type of Input:	1 to 2 single values, concatenated with &&, optional			(DISPLAY)
		single value, mandatory			(ADD,TYPE=DTE-data terminating equipment / ADD,TYPE=FAX-Facsimile / ADD,TYPE=STN-Station / ADD,TYPE=VCE-Voice / CHANGE,TYPE=CQMAX-Call queue maximum / CHANGE,TYPE=NAME-Name / CHANGE,TYPE=NNO-virtual node number / CHANGE,TYPE=OVFLDEST-Overflow destination / CHANGE,TYPE=TYPE-Hunt type / DELETE,TYPE=CD-Code / DELETE,TYPE=HT-Hunt group / DELETE,TYPE=NAME-Name / DELETE,TYPE=STN-Station)
		single value, optional			(REGENERATE)
	Possible Values:	0-9,*,#,A-D, up to 12 characters
CDNEW	new access code of hunting group
	Type of Input:	single value, mandatory
	Possible Values:	0-9,*,#,A-D, up to 12 characters
CDOLD	old access code of hunting group
	Type of Input:	single value, mandatory
	Possible Values:	0-9,*,#,A-D, up to 12 characters
CPS	Call progress state
	Type of Input:	0 to 12 single values, concatenated with &, optional
	Possible Values:	numeric, 1-22
CQMAX	Call ordering/queuing capacity If the parameter VARCQ is set to Y, the number of call queues will be determined automati cally and the parameter CQMAX will be ignored. If VARCQ is set to N, the parameter CQMAX must be specified.
	Type of Input:	single value, mandatory			(CHANGE,TYPE=CQMAX-Call queue maximum)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	numeric, up to 3 characters
CSANS	Customer specific announcement, synchronized (see AMO SYNCA)
	Type of Input:	single value, 4. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	NO			(ADD,TYPE=VCE-Voice)
DISPTYPE	Number displayed at partner station.
	Type of Input:	single value, 5. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=DTE-data terminating equipment / ADD,TYPE=FAX-Facsimile / ADD,TYPE=VCE-Voice)
	Possible Values:	EXT	MEMBER NUMBER (EXTENSION) FOR INCOMING CALLS	DB_RTGATT_SA_DSPTYP_EXT
		HT	HT NUMBER FOR INCOMING CALLS	DB_RTGATT_SA_RTG_WITH_MSN
		HTALL	HT NUMBER FOR INC&OUT CALLS, FOR ALL MEMBERS	DB_RTGATT_SA_DSPTYP_HTALL
		HTLOGD	HT NUMBER FOR INC&OUT CALLS, FOR LOGGED IN MEMBERS	DB_RTGATT_SA_DSPTYP_HTLOGD
DPLN	Feature access group / dial plan
	Type of Input:	0 to 3 single values, concatenated with & or &&, optional
	Possible Values:	numeric, 0-63
EXECCFW	Execute call forwarding from huntgroups
	Type of Input:	single value, 7. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	NO			(ADD,TYPE=VCE-Voice)
FNA	Forward if no answer
	Type of Input:	single value, 2. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	YES			(ADD,TYPE=VCE-Voice)
FOLFWBSY	Follow forwarded to determine busy status
	Type of Input:	single value, 11. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	NO
FORMAT	Desired output format
	Type of Input:	single value, optional
	Possible Values:	GR	Group
ITR	internal traffic restriction group / closed user group
	Type of Input:	single value, optional
	Possible Values:	numeric, 0-63
LSTMBOFF	Last HG member is allowed to leave the group
	Type of Input:	single value, 9. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	NO			(ADD,TYPE=VCE-Voice)
LVAFTEXT	Leave Hunt Group after netw. member
	Type of Input:	single value, 6. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
NAME	Name of hunting group
	Type of Input:	single value, mandatory			(CHANGE,TYPE=NAME-Name)
	Type of Input:	single value, optional			(ADD,TYPE=DTE-data terminating equipment / ADD,TYPE=FAX-Facsimile / ADD,TYPE=VCE-Voice)
	Possible Values:	text, up to 16 characters
NNO	Virtual node number
	Type of Input:	0 to 3 single values, concatenated with -, optional
	Possible Values:	numeric, 0-999
NUMBER	Destination number
	Type of Input:	single value, mandatory
	Possible Values:	0-9,*,#,A-D, up to 22 characters			(ADD,TYPE=VCE-Voice,OVFLDEST=DESTEXT-Destination extension / CHANGE,TYPE=OVFLDEST-Overflow destination,OVFLDEST=DESTEXT-Destination extension)
	Possible Values:	0-9,*,#,A-D, up to 7 characters			(ADD,TYPE=VCE-Voice,OVFLDEST=PHONMAIL-Phone mail box / ADD,TYPE=VCE-Voice,OVFLDEST=VMSNW-VMS network wide / CHANGE,TYPE=OVFLDEST-Overflow destination,OVFLDEST=PHONMAIL-phone mail box / CHANGE,TYPE=OVFLDEST-Overflow destination,OVFLDEST=VMSNW-VMS network wide)
OVERFLOW	Display only hunt groups with overflow destination
	Type of Input:	single value, optional
	Possible Values:	Y	yes
	Default Value:	NO
OVFLCYCL	Overflow after one cycle
	Type of Input:	single value, 8. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	NO			(ADD,TYPE=VCE-Voice)
OVFLDEST	Overflow destination
	Type of Input:	single value, mandatory			(CHANGE,TYPE=OVFLDEST-Overflow destination)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	DESTEXT	Destination extension
		NONE	no overflow
		PHONMAIL	Phone mail box		(ADD,TYPE=VCE-Voice)
		PHONMAIL	phone mail box		(CHANGE,TYPE=OVFLDEST-Overflow destination)
		VMSNW	VMS network wide
	Default Value:	NONE			(ADD,TYPE=VCE-Voice)
POS	position where station is to be linked
	Type of Input:	single value, optional
	Possible Values:	numeric, up to 4 characters
STNO	Station number
	Type of Input:	0 to 10 single values, concatenated with &, optional			(ADD,TYPE=DTE-data terminating equipment / ADD,TYPE=FAX-Facsimile / ADD,TYPE=VCE-Voice)
		1 to 10 single values, concatenated with &, mandatory			(ADD,TYPE=STN-Station / DELETE,TYPE=STN-Station)
		single value, optional			(DISPLAY)
	Possible Values:	0-9,*,#,A-D, up to 22 characters
STYPE	Search type
	Type of Input:	single value, 1. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, mandatory			(ADD,TYPE=DTE-data terminating equipment / ADD,TYPE=FAX-Facsimile / ADD,TYPE=VCE-Voice)
	Possible Values:	CYC	Cyclic	DB_GS_SEARCH_CIRCULAR
		LIN	Linear	DB_GS_SEARCH_LINEAR
		PRL	Parallel	DB_GS_SEARCH_PARALLEL
SVC	Destination device service
	Type of Input:	single value, mandatory			(ADD,TYPE=STN-Station / CHANGE,TYPE=TYPE-Hunt type / DELETE,TYPE=HT-Hunt group / DELETE,TYPE=STN-Station)
	Type of Input:	single value, optional			(DISPLAY)
	Possible Values:	DTE	Data terminating equipment	DB_SI_DEE
		FAX	Facsimile	DB_SI_FAX
		VCE	Voice	DB_SI_VOICE
TYPE	Desired hunting group option
	Type of Input:	single value, mandatory
	Possible Values:	CD	Code		(DELETE)
		CQMAX	Call queue maximum		(CHANGE)
		DTE	data terminating equipment		(ADD)
		DUPL	duplicate		(ADD)
		FAX	Facsimile		(ADD)
		HT	Hunt group		(CHANGE / DELETE)
		NAME	Name		(CHANGE / DELETE)
		NNO	virtual node number		(CHANGE)
		OVFLDEST	Overflow destination		(CHANGE)
		STN	Station		(ADD / DELETE)
		TYPE	Hunt type		(CHANGE)
		VCE	Voice		(ADD)
VARCQ	Variable call queuing. The number of call queue elements is automatically matched to the number of hunting group stations during setup. The parameter CQMAX is ignored! Furthermore, when a station is disconnected and then reconnected to the hunting group using the AMADAPT-TASK, the call queuing capacity will be automatically matched to the number of stations.
	Type of Input:	single value, 3. parameter of a min-1-group			(CHANGE,TYPE=TYPE-Hunt type)
	Type of Input:	single value, optional			(ADD,TYPE=VCE-Voice)
	Possible Values:	N	No	FALSE
	Possible Values:	Y	Yes	TRUE
	Default Value:	NO			(ADD,TYPE=VCE-Voice)

Error Messages

DISPLAY-SA	DISPLAY-SA:STNO=@@@@@@@@@@@@@@@@@@@@@@;
F01	F01: DPLN <DPLN> has been input several times
	Cause:	Parameter DPLN has been entered more than once. (ADD, CHANGE, DELETE, DISPLAY)
F02	F02: CPS <CPS> has been input several times
	Cause:	Parameter CPS has been entered more than once. (ADD, CHANGE, DELETE, DISPLAY)
F03	F03: The parameters entered do not lead to DAR "STN" or "HUNT"
	Cause:	The combination of the parameters CD, DPLN and CPS do not lead to a DAR of type STN or HUNT. (ADD, CHANGE)
F04	F04: Station hunting has already been added for <CD>
	Cause:	See error message (ADD)
F05	F05: The ordered number of Hunting Groups has been exceeded
	Cause:	The number of hunt groups has exceeded DIMSU parameter HT. (ADD)
F06	F06: The ordered number of routing codes has been exceeded
	Cause:	The number of routes has exceeded DIMSU parameter RTE. (ADD)
F07	F07: The ordered number of main groups has been exceeded
	Cause:	The number of main groups has exceeded DIMSU parameter MG. (ADD)
F08	F08: The ordered number of subgroups has been exceeded
	Cause:	The number of sub groups has exceeded DIMSU parameter SG. (ADD)
F09	F09: No further memory space available. Request more with AMO DIMSU.
	Cause:	The DIMSU-heap memory has reached the limit. (ADD)
	Repair:	Try to free heap memory with reduction of unused DIMSU parameters.
F10	F10: Parameter STNO must be entered
	Cause:	Parameter STNO is required for Pilot Hunt Groups. (ADD)
F11	F11: For STNO <STNO> no <SVC> device has been assigned
	Cause:	There is no device configured for this STNO for the hunt group service. Exception: External stations for service voice. (ADD)
F12	F12: STNO <STNO> has been input several times
	Cause:	Station STNO has been entered more than once. (ADD)
F13	F13: no <SVC> device has been assigned for Master-STN
	Cause:	The Hunt group master station has no device assigned in the desired service. (ADD)
F16	F16: the STNO <STNO> is not valid for all dpln and cps values of the hunt group or leads to an invalid DAR (AMO WABE).
	Cause:	The external station must have the same validation in the dial plan like the hunt group. (ADD)
F17	F17: the overflow destination <NUMBER> is not valid for all dpln and cps values of the hunt group (AMO WABE).
	Cause:	See error message. (ADD)
F18	F18: The ordered no. of queuing pos. for Hunt Groups has been exceeded. Request more with AMO DIMSU parameter HTCQB=<CQMAX>
	Cause:	See error message. (ADD)
F20	F20: Access code <CD> has a foreign <SVC> device
	Cause:	See error message. (ADD, CHANGE)
F23	F23: No station hunting found for this parameters
	Cause:	See error message. (ADD, CHANGE, DELETE)
F24	F24: The parameter input lead to more than one hunting group. Please specify CPS or DPLN.
	Cause:	See error message. (ADD, CHANGE, DELETE)
F25	F25: STNO <STNO> has already been added to this hunting group
	Cause:	See error message. (ADD)
F26	F26: In a master hunting group the first member must always be the master-station, i.e. position 1 not acceptable
	Cause:	See error message. (ADD)
F27	F27: STNO <STNO> has not been added to the hunt group
	Cause:	See error message. (DELETE)
F28	F28: The Master-STN <STNO> cannot be deleted from the hunting group
	Cause:	See error message. (DELETE)
F29	F29: Old and new access codes are identical
	Cause:	See error message. (CHANGE)
F30	F30: CDNEW <CDNEW> is not a member of the hunt group Please check CDNEW for all services.
	Cause:	See error message. (CHANGE)
F33	F33: OVERFLW may only be specified for service voice
	Cause:	See error message. (DISPLAY)
F34	F34: Not all values entered lead to a valid DAR (Digit Analysis Result)
	Cause:	See error message. (ADD)
F35	F35: Not all STNO may be deleted
	Cause:	See error message. (DELETE)
F37	F37: STNO <STNO> is ATND number, ATND may not be member in HT
	Cause:	See error message. (ADD)
F38	F38: An executive/representative may not be a hunt group master (AMO CHESE)
	Cause:	See error message. (ADD, CHANGE)
F39	F39: A hunt group has already been added for CDNEW
	Cause:	See error message. (ADD)
F40	F40: Only a normal (Pilot) hunt group can be duplicated
	Cause:	See error message. (ADD)
F41	F41: Access code <CD> has been allocated to a CLC route.
	Cause:	See error message. (ADD, CHANGE)
F42	F42: FNA, VARCQ and CSANS may only be specified for voice service
	Cause:	See error message. (CHANGE)
F43	F43: if VARCQ = N is specified, parameter CQMAX must also be declared
	Cause:	See error message. (ADD)
F44	F44: If VARCQ = Y is specified, the number of calls which can be queued must not be changed
	Cause:	See error message. (CHANGE)
F45	F45: Changing hunt group STN to Master-STN and vice-versa only possible by using delete and add functions.
	Cause:	See error message. (CHANGE)
F46	F46: Not enough CCIDX memory to complete operation: Try to get more memory using AMO DIMSU, parameter CCIDXS/CCIDXD.
	Cause:	See error message. (DELETE)
F47	F47: STNO <STNO> is a special subscriber which cannot be member of a hunting group.
	Cause:	See error message. (ADD)
F48	F48: CD <STNO> is a special subscriber which cannot be master of a hunting group.
	Cause:	See error message. (ADD)
F49	F49: CD <STNO> is used in the ACD routing tables. The hunting group can wether be deleted nor its access code changed.
	Cause:	See error message. (CHANGE, DELETE)
F50	F50: STNO <STNO> is analog side of a modem, it must not be member or master of a hunting group.
	Cause:	See error message. (ADD)
F51	F51: During generation of an internal call forwarding destination for STNO <STNO>: Insufficient line memory space for virtual lines.
	Cause:	See error message. (ADD)
F52	F52: During generation of an internal call forwarding destination for STNO <STNO>: the maximum planned number of stations has been reached. the number of stations allowed can be increased with amo dimsu.
	Cause:	See error message. (ADD)
F53	F53: During generation of an internal call forwarding destination for STNO <STNO>: INSUFFICIENT MEMORY SPACE (AMO DIMSU: PARAMETER <PARAM>).
	Cause:	See error message. (ADD)
F54	F54: Internal error during generation of an internal call forwarding destination for STNO <STNO>: Unable to store virtual line.
	Cause:	See error message. (ADD)
F55	F55: STNO <STNO> was configured with AMO DNIT and cannot be member of a hunt group.
	Cause:	See error message. (ADD)
F56	F56: Insufficient line memory space for virtual lines.
	Cause:	See error message. (ADD)
F57	F57: The maximum planned number of stations has been reached. The number of stations allowed can be increased with AMO DIMSU.
	Cause:	See error message. (ADD)
F58	F58: INSUFFICIENT MEMORY SPACE (AMO DIMSU: PARAMETER <MEM>).
	Cause:	See error message. (ADD)
F59	F59: Unable to store virtual line.
	Cause:	See error message. (ADD)
F60	F60: The hunting group <CD> could not be deleted for service <SVC> because it is still in use by call processing.
	Cause:	See error message. (DELETE)
F61	F61: MASTER PHONE OF AN ONS GROUP CAN NOT BE MASTER OF A HUNTING GROUP.
	Cause:	See error message. (ADD)
F62	F62: SECONDARY PHONES OF AN ONS GROUP CAN NOT BE MEMBER OF A HUNTING GROUP.
	Cause:	See error message. (ADD)
F63	F63: THE ITR GROUP MUST BE ENTERED WHEN CREATING A NEW HUNTING GROUP.
	Cause:	See error message. (ADD)
F65	F65: SWITCHING BETWEEN LIN/CYC AND PRL IS NOT ALLOWED.
	Cause:	See error message. (CHANGE)
F66	F66: A HUNTGROUP WITH PARALLEL RINGING CAN ONLY HAVE 20 MEMBERS
	Cause:	See error message. (ADD)
F67	F67: PARALLEL RINGING IS SUPPORTED ONLY BY VOICE SERVICE.
	Cause:	See error message. (ADD)
F68	F68: FOR STNO <STNO> NO VOICE DEVICE HAS BEEN ASSIGNED. EXTERNAL NUMBERS CANNOT BE ADDED TO A HUNT GROUP WITH PARALLEL RINGING.
	Cause:	See error message. (ADD)
F69	F69: STATION <STNO> IS A <SIP SUBSCRIBER/FUNCTIONAL DEVICE> WHICH CANNOT BE MEMBER OF A PARALLEL RINGING HUNT GROUP WITH BUSYCOND=ONE OR FOLFWBSY=Y.
	Cause:	See error message. (ADD)
F70	F70: ENTRY COULD NOT BE DELETED COMPLETELY. PROBABLY THERE IS INCONSISTANCY IN DATABASE.
F71	F71: NNO Level<2/1/0> not allowed. Range <0/1> to <29/253/999>.
F72	F72: NNO @@@@@@@@@@@ is not defined in virtual node table (AMO KNDEF)
F73	F73: MEMBERS USING DISPTYPE HTLOGD OR HTALL CAN ONLY BE CONFIGURED IN ONE HUNT GROUP. PLEASE CHECK THE FOLLOWING GROUP(S):
F74	F74: STATION <STNO> IS A DESK FROM A DESK/CLIENT CONFIGURATION AND THEREFORE CANNOT BE <MASTER/MEMBER> OF A PARALLEL RINGING HUNT GROUP.
F75	F75: STATION <STNO> IS A CLIENT FROM A DESK/CLIENT CONFIGURATION AND THEREFORE CANNOT BE <MASTER/MEMBER> OF A HUNT GROUP.

Advisory Messages

H01	H01: NO HUNTING GROUPS HAVE BEEN ADDED FOR THE SPECIFIED PARAMETERS
H02	H02: PARAMETER DPLN IS IGNORED FOR A MASTER HUNT GROUP
H03	H03: A NAME HAS ALREADY BEEN ADDED. THE PARAMETER WAS IGNORED
H04	H04: MASTER-STN <CD> IS NEEDLESSLY RESPECIFIED FOR PARAMETER STNO
H05	H05: POSITION <POS> IS GREATER THAN THE NUMBER OF MEMBERS IN THE HUNTING GROUP. THE PARAMETER WAS IGNORED
H06	H06: NO NAME WAS ADDED FOR THIS HUNT GROUP
H08	H08: PARAMETER CPS IS IGNORED FOR A MASTER HUNT GROUP
H09	H09: THE HUNTING GROUP IS ACCESSIBLE BY OTHER DPLN GROUPS AND/OR IN OTHER CALL PROGRESS STATES THAN AT THOSE SPECIFIED
H10	H10: PARAMETER CQMAX IS IGNORED IF VARCQ = Y IS SPECIFIED
H11	H11: IF COHG = Y IS SPECIFIED, AUTCODIG = N IS SET AUTOMATICALLY
H13	H13: problems with memory management: Please try to get more memory using AMO DIMSU (parameter CCIDXS/CCIDXD).
H14	H14: the overflow destination leads to paging; the access code of the hunt group has been added.
H15	H15: The parameters csans, execcfw and ovflcycl are only valid for voice hunt groups; they are ignored for non voice hunt groups.
H16	H16: Note: There is no floating ID card user necessary for external stations. The external access code can be entered immediate as STNO.
H17	H17: THE SPECIFIED STNO <RUFNR> IS SHORTENED TO THE EXISTING STNO <STNO>. PROBABLY THE PROBLEM IS CAUSED BY A TYPING ERROR.
H18	H18: THE SETTING OF LSTMBOFF HAS ONLY AFFECT IF THE HG MEMBER(S) IS/ARE - CONFIGURED ONLY IN ONE HG OR - CONFIGURED IN MORE HGS, WITH THE SAME LSTMBOFF SETTINGS.
H19	H19: THE SETTING OF LSTMBOFF HAS ONLY AFFECT IF - ALL SUBSCRIBERS ARE ONLY CONFIGURED IN THIS HUNT GROUP OR - IN ALL AFFECTED HUNT GROUPS LSTMBOFF SETTINGS ARE CONFIGURED EQUAL.
H20	H20: AMO ZANDE:SPS IS SET TO YES. IF A HUNT GROUP IS TO BE REACHED VIA THIS CONFIGURATION AMO SA:LVAFTEXT MUST BE SET TO NO.
H21	H21: HUNT GROUP IS NOT ADDED FOR CPS:<CPS>. CHECK DIS-WABE:<STNO>;
H22	H22: PARAMETERS EXECCFW, CSANS, OVFLCYCL, LVAFTEXT AND FNA ARE IGNORED FOR PARALLEL RINGING HUNT GROUPS.
H23	H23: PARAMETERS BUSYCOND AND FOLFWBSY ARE IGNORED FOR LINEAR OR CYCLIC.
H24	H24: <BUSYCOND=ONE/FOLFWBSY=Y> IS NOT POSSIBLE FOR A HUNTING GROUPS WITH SIP PHONES OR FUNCTIONAL DEVICES AND WILL BE IGNORED.
H25	H25: <CD> THE HUNT GROUP BELONGS TO VIRTUAL NODE @@@@@@@@@@@
H26	H26: NNO Level<2/1/0> not allowed. Range <0/1> to <29/253/999>.
H27	H27: NNO @@@@@@@@@@@ is not defined in virtual node table (AMO KNDEF)
H28	H28: NOTE: This configuration contains a phantom line. Incoming calls to the parallel hunt group are signaled exclusively to the called prime device, therefore the call will not be signaled to the phantom device.