80.5.1 Error Messages

F01:
PLEASE ENTER GDTRRULE=0 FOR THE CASE ROUTING=SA (SID/ANI).
F02:
PLEASE ENTER THE NUMBER OF AN EXISTING GDTR RULE (GDTRRULE>0)
FOR ROUTING=DRTSA.
F03:
THE INTERNAL ROUTING DIRECTORY NUMBER ’INTRTDN’ OF A GDTR ENTRY
WITH GDTRRULE=<rrr> POINTS TO A DNI ENTRY WITH ROUTING=<ttttt>.
SUCH A DNI ENTRY MUST HOWEVER HAVE ROUTING=SA (SID/ANI).
F04:
CANNOT CHANGE/DELETE RULE GDTRRULE=<rrr> - IT IS STILL BEING
REFERENCED BY TABLES (AMO-ffff,ppppp)
F05:
NO GDTR RULE WITH GDTRRULE=<rrr> PRESENT.
F06:
NO ENTRY WITH DGTSTR=<dddddddddddddddd> AND GDTRRULE=<rrr> AVAILABLE.
F07:
AN ENTRY WITH DGTSTR=<dddddddddddddddd> AND GDTRRULE=<rrr> ALREADY PRESENT.
F08:
CANNOT USE INTERNAL ROUTING DIRECTORY NUMBER TO INTRTDN=<nnnnnn> -
IT MUST FIRST BE ASSOCIATED WITH DIGIT ANALYSIS RESULT DAR=STN
(ADD-WABE:CD=<?>,DAR=STN;)
F09:
INTERNAL ROUTING DIRECTORY NUMBER INTRTDN=<nnnnnn> IS ALREADY IN USE.
F10:
NO ENTRY WITH INTERNAL ROUTING DIRECTORY NUMBER INTRTDN=<nnnnnn>
PRESENT IN THE DNI TABLE (DISPLAY-DNIT:TBL=DNI;).
F11:
CANNOT DELETE INTERNAL ROUTING DIRECTORY NUMBER INTRTDN=<nnnnnn> -
IT IS STILL BEING REFERENCED BY THE GDTR TABLE.
FIND REFERENCES (DISPLAY-DNIT:TBL=GDTR,INTRTDN=<?>;) AND REMOVE THEM
(DELETE-DNIT:TBL=GDTR,GDTRRULE=,DGTSTR=<?>;).
F12:
INVALID DIGIT ANALYSIS RESULT FOR INTERNAL ROUTING DIRECTORY
NUMBER INTRTDN=<nnnnnn>. THE CORRECT ASSIGNMENT IS DAR=STN.
(DISPLAY-WABE,TYPE=GEN,CD=<?>;)
F13:
INVALID DIGIT ANALYSIS RESULT FOR <dddddddddddddddd>. DAR MUST BE OF TYPE:
STN, NETW, HUNT, TIE, ATND, COMBO, MILLWAT, LOOPBACK OR SILENCE. (AMO-WABE:DAR)
F15:
THE ROUTE CONTROL GROUP 'RCG' HAS NOT YET BEEN CREATED.
FIRST RESERVE RCG INDEX
(CHANGE-ACDSD:TYPE=CAFRCG,RCG=<?>,CAFDN=<?>;)
F16:
FIRST A ROUTE SELECTION TABLE (RS) HAS TO BE
SET UP FOR ROUTE CONTROL GROUP RCG=<aaaa>:
ADD-ACDRS:TYPE=RS,RCG=<aaaa>,...;
F17:
AUDIBLE SOURCE ID AUDSRCID=^audsrcid^ HAS YET TO BE CREATED:
ADD-RCSU:OPMODE=CONT,OPTYPE=RANDOM,RECAPL=ACDR,RECNUM=<?>;
F18:
THE APPLICATION TYPE ASSIGNED FOR RECORDER
'AUDSRCID' BY AMO RCSU MUST BE RECAPL=ACDR.
F19:
RECORDER 'AUDSRCID' MUST BE CONFIGURED WITH
CONTINUOUS OPERATIONS MODE AND RANDOM START.
(CHANGE-RCSU,OPMODE=CONT,OPTYPE=RANDOM,RECNUM=<?>;)
F20:
WILDCARDS ALLOWED ONLY AT TRAILING POSITIONS OF COMMAND INPUT 'DGTSTR'.
F21:
EITHER A SINGLE JOKER (#) OR A DIGIT STRING WITH EVENTUAL
TRAILING WILDCARDS (*) MAY BE ENTERED FOR 'DGTSTR'.
F22:
DIGITS "A" ... "D" ARE NOT ALLOWED FOR 'DGTSTR'.
F23:
NO 'SVCDATA' ALLOWED FOR A SID/ANI ENTRY.
F24:
MEMORY RESERVED FOR DNI TABLE ENTRIES IS INSUFFICIENT.
PLEASE ALLOCATE ADDITIONAL MEMORY
(ADD-DIMSU:DNI=<?>;)
F25:
MEMORY RESERVED FOR GDTR TABLE ENTRIES IS INSUFFICIENT.
PLEASE ALLOCATE ADDITIONAL MEMORY
(ADD-DIMSU:GDTR=<?>;)
F26:
INSUFFICIENT MEMORY FOR DISPLAY TEXTS.
F27:
MEMORY RESERVED FOR RULO BLOCKS IS INSUFFICIENT.
PLEASE ALLOCATE ADDITIONAL MEMORY
(ADD-DIMSU:BLK100=<?>;)
F28:
A 'TARGET' MUST BE ENTERED FOR ACD=N.
F29:
AN RCG INDEX MUST BE ENTERED WHEN CHANGING FROM ACD=N TO ACD=Y.
F30:
THE TWO DIGIT STRINGS DELIMITING THE RANGE ENTERED FOR 'DGTSTR' MUST HAVE THE SAME LENGTH.
F31:
DIGITS "A" ... "D" ARE NOT ALLOWED FOR 'THRSHLD'.
F32:
THE CHARACTER "*" MUST STAND ALONE`
IF USED IN THE INPUT FOR 'THRSHLD'.
F33:
USE EITHER A SINGLE ASTERISK ("*") OR A NUMBER IN THE RANGE 0-1024 AS INPUT FOR 'THRSHLD'.
F34:
THE TWO INTERNAL ROUTING DIRECTORY NUMBERS DELIMITING THE RANGE ENTERED FOR 'INTRTDN' MUST HAVE THE SAME LENGTH.
F35:
CHANGE FROM ROUTING=<ttttt> TO ROUTING=<ttttt> NOT PERMITTED -
ONLY FROM ROUTING=DRTD TO ROUTING=DRTSA OR VICE VERSA.
F36:
CANNOT CHANGE/DELETE INTERNAL ROUTING DIRECTORY NUMBER
INTRTDN=<nnnnnn> - IT IS REFERENCED BY RULE AMO-ffff,ppppp)
F37:
THE TARGET MUST HAVE BEEN SET UP AS A SUBSCRIBER.
F38:
SUBSCRIBER NUMBERS 'TARGET' AND 'INTRTDN' MUST BE DIFFERENT.
F39:
THE TARGET MUST BE ASSOCIATED WITH AN ATTENDANT GROUP (ADD-VFGR,ATNDGR=;).
F40:
CANNOT DELETE INTERNAL ROUTING DIRECTORY NUMBER INTRTDN=<nnnnnn>
- IT IS STILL BEING REFERENCED BY THE ACD ROUTING TABLES.
ENTER COMMAND 'DISPLAY-ACDRT;' AND SEARCH FOR ENTRIES HAVING
'RTAGT, RTOFF,RTEXT' IN COLUMNS 'ACTION, PARAMETER' AND THE APPROPRIATE
DIRECTORY NUMBER IN COLUMN 'VALUE'.
(DELETE STEPS WITH 'CHANGE-ACDRT:TYPE=DELSTEP,STEP=<?>;',
REMOVE ACD ROUTING TABLES WITH 'DELETE-ACDRT:ART=<?>;')
F41:
CANNOT DELETE JOKER - THE GDTR RULE FOR JOKER IS REFERENCED BY A TRUNK GROUP CONTAINING ANI-ONLY TRUNKS.
TRUNK GROUPS FOR ALL AFFECTED TRUNKS MUST BE CHANGED TO USE A DIFFERENT GDTR RULE THAT CONTAINS A JOKER (AMO BUEND,GDTRRULE; AMO TDCSU,TGRP).
F42:
CANNOT SET ALL ENTRIES IN GDTRSR TABLE TO ZERO SINCE TRUNK GROUP <ggg> CONTAINS GDTR PRIB TRUNK. (AMO-TDCSU,TGRP)
F43:
MEMORY RESERVED FOR DATA POOL ELEMENTS IS INSUFFICIENT.
PLEASE ALLOCATE ADDITIONAL MEMORY
(ADD-DIMSU:DPDNI=<?>;)
F44:
DATA POOL RESERVED FOR AMO-DNIT HAS EXHAUSTED ITS MEMORY.
SEE AMO-DIMSU TO ALLOCATE MORE MEMORY
(ADD-DIMSU, DPMDNIT).
F45:
TDS TEST TERMINATION ACCESS CODES CANNOT BE ASSIGNED AS A TARGET FOR A DNI TABLE ENTRY SET TO 'SA'.
F46:
FOR TARGETS ASSOCIATED WITH TDS TEST TERMINATION ACCESS CODES THE PARAMETERS 'ROUTING, GDTRRULE, DISPLAY' MAY NOT BE CHANGED FROM THEIR DEFAULT VALUES.
F47:
NUMBER ENTERED FOR INTRTDN=<nnnnnn> IS ALREADY
USED AS AN EXTERNAL STATION NUMBER.
F48:
NUMBER ENTERED FOR INTRTDN=<nnnnnn> IS ALREADY USED
AS AN EXTERNAL HUNTING DESTINATION (DISPLAY-SA,STNO=<?>).
F49:
CANNOT DELETE DIRECTORY NUMBER INTRTADR=<nnnnnn> - THE ASSIGNMENT DAR=STN FOR DIGIT ANALYSIS RESULT IS MISSING.
F50:
THE SPECIFIED TRUNK GROUP HAS NOT YET BEEN CREATED
(AMO BUEND, TGRP).
F52:
INSUFFICIENT MEMORY FOR SUBSCRIBERS - ALLOCATION: 'ADD-DIMSU:STN=<?>'.
F53:
INSUFFICIENT MEMORY FOR DEVICES - ALLOCATION: 'ADD-DIMSU:LODEN=<?>'.
F54:
THE INTERNAL ROUTING DIRECTORY NUMBER 'INTRTDN' OF A GDTR ENTRY WITH GDTRRULE=<rrr> POINTS TO A DNI ENTRY WITH ROUTING=<ttttt>. SUCH A DNI ENTRY MUST HOWEVER HAVE ROUTING=DRTD OR DRTSA.
 
 
Output Text Definitions
aaaa
Route Control Group (1-1020)
ddd..
Digit String
fff..
AMO
ggg
Trunk Group (1-512)
ii
Audible Source Id (0-206)
nnn..
Internal Routing Number, Target (0...999999)
ppp..
Parameter
rrr
General Digit Translation Rule (1-255)
ttttt
Routing type with possible values: DRTD, DRTSA, SA
F55:
THIS DIRECTORY NUMBER IS USED BY AN ACD GROUP AS PILOT NUMBER GRPPN. CHANGE THE ACD GROUP ENTRY BEFORE REPEATING THIS COMMAND.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.