155.2.3 DELETE-RCSU

Created recorders are deleted by means of the function DELETE-RCSU. Only the port location has to be entered to cancel a recorder.

A recorder which is in the ready state cannot be deleted unless deactivated by AMO DSSU. When a recorder is to be deleted, it should be deactivated immediate (DEA-DSSU:DI,...).
To determine the status of the recorder, use AMO SDSU
(DIS-SDSU:,,PEN,PER3,<LTG>,<LTU>,<SLOT>,<CIRC>;).

A recorder may not be deleted if referenced by AMO DNIT or AMO ACDRT.

Procedure Overview


Command Code	Parameter
DELETE-RCSU	PEN=<GG-UU-BBB-SS>;

Examples:

Delete the recorder at port 1-2-13-5.

Input:

DEL-RSCU:PEN=1-2-13-5;

Output:

H02: RECORDER AT PORT 01-02-013-05 HAS BEEN DELETED.

Delete the recorder at port 1-4-13-3.

Input:

DEL-RCSU:PEN=1-4-13-3;

Output:

H02: RECORDER AT PORT 01-04-013-03 HAS BEEN DELETED.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.