198.1 Interrelationships

•
The AMO BCSU configures modules for trunks
•
The AMO BUEND prepares empty trunk groups and administers their memory sizes.
•
The AMO COP is used to enter line parameters which can be assigned to trunks using the parameter COPNO.
•
The AMO COT is used to enter line parameters which can be assigned to trunks using the parameter COTNO.
•
Timers assigned by the AMO CTIME are assigned with the parameters WAITT, DELANS and WAIT
•
Timers set by the AMO DTIM1 are assigned using the parameters SUPV, STADIAL, EOD and TBT.
•
Timers set by the AMO DTIM2 are assigned using the parameter STADIAL.
•
The AMO RICHT is used to assign an route access code to trunk groups for outgoing/incoming traffic
•
The AMO SYNCA is used to assign the announcement type which must be allocated to a RAS device by parameter ANNTYPE
•
The AMO VADSU is used to assign alarms, which can be assigned to trunks (see parameter ALARMNO)