180.4 Error Messages and Advisories

180.4.1 Error Messages

 
F01:
NO LOCATIONS ARE FREE.
F02:
ENTERED <MSGRNO/UNANO/CCNO/MWINO> IS NO LONGER FREE.
F03:
THE ENTERED LOCATION <LTG-LTU-SLOT-CIRC> DOES NOT LEAD TO AN SLMA-TYPE MODULE.
F04:
NO DEVICE MEMORIES ARE FREE.
F05:
ENTERED LOCATION <LTG-LTU-SLOT-CIRC> IS NO LONGER FREE.
F06:
INADMISSIBLE <LTG/LTU/SLOT/CIRC> VALUE ENTERED IN LOCATION PARAMETER.
F07:
THE <MSGR/GENANS/CC> USER ENTERED CANNOT BE DELETED SINCE HE IS ASSIGNED TO <EXEC-SECRETARY SYSTEM NO./NIGHT VARIANT NO./SINGLE CC WITH ROUTING CODE:> xxxxxx.
F08:
THE ENTERED <MSGR/GENANS/CC/VMXMWI> USER CANNOT BE DELETED; FIRST ENTER MANUAL DISABLEMENT.
F10:
<LTG/LTU> NOT ADDED TO THE SYSTEM.
F11:
ADD/DELETE OF MESSENGER-SUBSCRIBER IS NOT POSSIBLE BECAUSE OF MAXIMUM OF EXECUTIVE/SECRETARY SYSTEM WAS SET TO ZERO (AMO DIMSU).
F12:
ENTERED COS NOT AVAILABLE.
F13:
VMXMWI-SUBSCRIBER CANNOT BE DELETED BECAUSE IT IS STILL ALLOCATED TO THE SERVER.
F14:
WITH CPCALL xxxxxxxx THERE IS NO EXTANN USER CONFIGURATED.
F15:
THE CPCALL xxxxxxxx BELONGS ALREADY TO AN EXTANN USER.
F16:
ANOTHER CPCALL IS NOT POSSIBLE AT THIS LOCATION.
F17:
ENTERED PEN <LTG-LTU-SLOT-CIRC> IS IN THE STATE "SIGNED OFF".
 
RELEASE WITH AMO BCSU FIRST, OR ENTER ANOTHER PEN.
F18:
THE SUBSCRIBER CANNOT BE ADDED. THE CONTRACTED NUMBER OF FLEX+TDM <xxx> IS
REACHED.
PLEASE USE DISPLAY-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES.
PLEASE CONTACT YOUR SERVICE CENTER, IF YOU WANT TO USE ONE OF THESE FEATURES.
F19:
THE CLASSMRK VALUES 'INIT' OR 'NONE' MAY NOT BE"
CONCATENATED.
F20:
ENTERED LCOSSL NOT AVAILABLE.
F21
THE ENTERED LTU @@ IS NOT CONFIGURED.
F22
MAX. NUMBER OF EXTERNAL ANNOUNCEMENT DEVÝCES CONFIGURED.
F24:
<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTG: 1-<max>
F25:
<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTU: 1-<xx>, <yy>-<max>
F26:
<xxxxxxxxxxxx> PEN ERROR; SLOT FORMALLY INCORRECT
F27:
<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE CIRCUIT NUMBERS: <0-<cct_max>/<n>, <m>, ...>
F29:
<xxxxxxxxxxxx> THE DEVICE CONFIGURATION DVCFIG DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F30:
<xxxxxxxxxxxx> THE STATION IS CAMP-ON BLOCKED. OPTIONS: - REPEAT COMMAND LATER - REPEAT COMMAND WITH IMMEDIATE DEACTIVATION (OFFTYPE=DI) - FIRST DEACTIVATE BY DEACT-DSSU:OFFTYPE=DI,....; AND REPEAT COMMAND
F32:
<xxxxxxxxxxxx> THE STATION MUST BE DEACTIVATED. OPTIONS: - REPEAT COMMAND WITH DEACTIVATION (OFFTYPE=DC/DI) - FIRST DEACTIVATE BY DEACT-DSSU:OFFTYPE=DC/DI,...; AND REPEAT COMMAND
F34:
<xxxxxxxxxxxx> NO MODULE HAS BEEN ASSIGNED FOR THE SPECIFIED PEN.
F35:
<xxxxxxxxxxxx> IN ADDITION TO THE DVCFIG VALUE <dvcfig>, THE PARAMETER <param> MUST ALSO BE SPECIFIED
F39:
<xxxxxxxxxxxx> THE <STATION/NEW STATION|PRIMARY STATION> NUMBER IS AN EXTERNAL STATION NUMBER
F40:
<xxxxxxxxxxxx> THE TERMINAL IS NOT PROCESSED BY AMO SSCSU
F41:
<xxxxxxxxxxxx> VALUE FOR PARAMETER OPT DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F51:
THE STATION NUMBER RANGE <xxxxxxxxxxxx> - <yyyyyyyyyyyy> CONTAINS NO VALID STATION NUMBER
F55:
<xxxxxxxxxxxx> THIS STATION IS ASSIGNED WITH <OPT>=<HTB/TC>
F57:
<xxxxxxxxxxxx> THE ADD-ON DEVICES MAY ONLY BE REMOVED, IF ALL AFFECTED KEY FUNCTIONS ARE SET TO VACANT" (AMO TAPRO)"
F58:
<xxxxxxxxxxxx> THIS STATION IS ALREADY ASSIGNED BY AMO <ACSU/RUFUM/SCSU/SBCSU/DNIT>
F60:
<xxxxxxxxxxxx> ALARMNO <nnnn> IS NOT YET ASSIGNED (AMO-VADSU).
F71:
<xxxxxxxxxxxx> FOR ADDING A DVCFIG=<HTBMNGR> ONLY A SINGLE STATION NUMBER IS ALLOWED.
F72:
<xxxxxxxxxxxx> DVCFIG=<HTBMNGR/HTBPHONE>: ONLY A COMBINATION OF VOICE AND DTE DEVICE IS ALLOWED.
F73:
<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT IS STILL REFERENCED IN THE ACD ROUTING TABLES. DELETE THE STATION BY AMO ACDRT FROM ACD ROUTING TABLE <nnnnn> BEFORE REPEATING THIS COMMAND.
F74:
<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT HAS STILL ASSIGNED AT LEAST ONE ACD ATTRIBUTE. DELETE THE ATTRIBUTES BY AMO SDAT BEFORE REPEATING THIS COMMAND. (CHA-SDAT:STNO=<xxxxxxxxxxxx>,TYPE=ATTRIBUT, DATTR=AGENT&SUPER&AUTOLOG&CAF;)
F75:
<xxxxxxxxxxxx> THE STATION COULD NOT BE ADDED BECAUSE NO VIRTUAL NODE ID HAS BEEN CONFIGURED. PLEASE ADD VIRTUAL NODE ID USING AMO KNDEF (TYPE=OWN).
F77:
<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED BECAUSE THE REQUIRED CONFIRMATION BY CALL PROCESSING HAS NOT BEEN RECEIVED YET. PLEASE REPEAT COMMAND LATER.
F78:
<xxxxxxxxxxxx> FOR SUBSCRIBERS WITH DVCFIG=TCEXT THE ATTRIBUTE SPECAR MUST BE SET IN COS 1 AND 2.
F80:
<xxxxxxxxxxxx> THE PEN IS SIGNED OFF. SSCSU SUBSCRIBERS ARE NOT CONFIGURABLE AT SIGNED OFF PORTS.
F92:
<xxxxxxxxxxxx>: THE STATION CANNOT BE DELETED BECAUSE OF LAW AND SECURITY REASONS. PLEASE CONTACT YOUR SYSTEM ADMINISTRATOR.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.