4.5.2 Advisory Messages


H01:	ACD ROUTING TABLE=@@@@ HAS BEEN CREATED.
H02:	NO FLEXAMA MEMORY IS CURRENTLY ALLOCATED FOR ACD ROUTING TABLES.
H03:	ART STEPS WITH SKIP-STATEMENTS HAVE BEEN ADDED FROM ART:STEP=@@@@:@@ TO ART:STEP=@@@@:@@.
H04:	THE UPPER LIMIT FOR THE NUMBER OF ART STEPS HAS BEEN SET TO MAXSTEP=@@.
H05:	THE ACTION OF THE STATEMENT CONTAINED IN STEP ART:STEP=@@@@:@@ HAS BEEN CHANGED TO ACT=@@@@@@@@.
H06:	ACD ROUTING TABLE ART=@@@@ HAS BEEN DELETED.
H07:	ACD ROUTING TABLE=@@@@ HAS BEEN CREATED AS A COPY OF TABLE ART=@@@@.
H09:	A STEP WITH THE DISCON-STATEMENT SHOULD BE PRECEDED BY A STEP WITH THE RTREC-STATEMENT.
H10:	THE DISCON-STATEMENT SHOULD BE THE FINAL LOGICAL STEP OF AN ACD ROUTING TABLE.
H12:	A STEP WITH THE RTMUS-STATEMENT SHOULD BE FOLLOWED BY A STEP WITH THE WTSEC-STATEMENT.
H13:	STATION NUMBER (EXTNUM) HAS NOT BEEN CONFIGURED. CREATE IT WITH THE FOLLOWING COMMAND: ADD-SCSU:STNO=<?>, OR ADD-SBCSU:STNO=<?> OR ADD-SSCSU:STNO=<?>, OR ADD-DNIT:TBL=DNI,INTRTDN=<?>,
H15:	NO CHANGES HAVE OCCURRED.
H16:	ROUTING TO STATION NUMBER EXTNUM=@@@@@@ WORKS ONLY IF THIS NUMBER IS ASSOCIATED WITH A HUNT GROUP ACCESS CODE. ASSIGN IT WITH THE FOLLOWING COMMAND: ADD-SA:TYPE=VCE,CD=@@@@@@,
H17:	AT LEAST ONE CONFIGURED ART STEP HAS BEEN DELETED.
H18:	STEP ART:STEP=@@@@:@@ HAS BEEN INSERTED.
H19:	STEP ART:STEP=@@@@:@@ HAS BEEN DELETED.
H20:	AT LEAST ONE (CONDITIONAL) JUMP STATEMENT HAS BEEN ADJUSTED.
H21:	THE RTREC-STATEMENT HAS BEEN DELETED, NOW THERE STANDS A DISCON-STATEMENT.
H22:	DUE TO THE ACD CONFIGURATION BY AMO ZAND (ACDDPLN=@@@@@@) EXTNUM @@@@@@ REPRESENTS @@@@@@@@@@@ FROM DPLN GROUP @@
H23	PLEASE CHECK THAT THE DIGIT ANALYSIS RESULT FOR THE STATION NUMBER DIRNUM=@@@@@@@@@@@@@@@@@@@@@@ ENTERED IS ALSO VALID FOR DPLN GROUP DPLNGRP=@@. (SEE AMO ZAND, TYPE=ACD, ACDDPLN=@@)
H24	NO REFERENCE WAS FOUND IN THE ACD ROUTING TABLES.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.