180.4 Error Messages and Advisories

180.4.1 Error Messages


F01:	NO LOCATIONS ARE FREE.
F02:	ENTERED <MSGRNO/UNANO/CCNO/MWINO> IS NO LONGER FREE.
F03:	THE ENTERED LOCATION <LTG-LTU-SLOT-CIRC> DOES NOT LEAD TO AN SLMA-TYPE MODULE.
F04:	NO DEVICE MEMORIES ARE FREE.
F05:	ENTERED LOCATION <LTG-LTU-SLOT-CIRC> IS NO LONGER FREE.
F06:	INADMISSIBLE <LTG/LTU/SLOT/CIRC> VALUE ENTERED IN LOCATION PARAMETER.
F07:	THE <MSGR/GENANS/CC> USER ENTERED CANNOT BE DELETED SINCE HE IS ASSIGNED TO <EXEC-SECRETARY SYSTEM NO./NIGHT VARIANT NO./SINGLE CC WITH ROUTING CODE:> xxxxxx.
F08:	THE ENTERED <MSGR/GENANS/CC/VMXMWI> USER CANNOT BE DELETED; FIRST ENTER MANUAL DISABLEMENT.
F10:	<LTG/LTU> NOT ADDED TO THE SYSTEM.
F11:	ADD/DELETE OF MESSENGER-SUBSCRIBER IS NOT POSSIBLE BECAUSE OF MAXIMUM OF EXECUTIVE/SECRETARY SYSTEM WAS SET TO ZERO (AMO DIMSU).
F12:	ENTERED COS NOT AVAILABLE.
F13:	VMXMWI-SUBSCRIBER CANNOT BE DELETED BECAUSE IT IS STILL ALLOCATED TO THE SERVER.
F14:	WITH CPCALL xxxxxxxx THERE IS NO EXTANN USER CONFIGURATED.
F15:	THE CPCALL xxxxxxxx BELONGS ALREADY TO AN EXTANN USER.
F16:	ANOTHER CPCALL IS NOT POSSIBLE AT THIS LOCATION.
F17:	ENTERED PEN <LTG-LTU-SLOT-CIRC> IS IN THE STATE "SIGNED OFF".
	RELEASE WITH AMO BCSU FIRST, OR ENTER ANOTHER PEN.
F18:	THE SUBSCRIBER CANNOT BE ADDED. THE CONTRACTED NUMBER OF FLEX+TDM <xxx> IS REACHED. PLEASE USE DISPLAY-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES. PLEASE CONTACT YOUR SERVICE CENTER, IF YOU WANT TO USE ONE OF THESE FEATURES.
F19:	THE CLASSMRK VALUES 'INIT' OR 'NONE' MAY NOT BE" CONCATENATED.
F20:	ENTERED LCOSSL NOT AVAILABLE.
F21	THE ENTERED LTU @@ IS NOT CONFIGURED.
F22	MAX. NUMBER OF EXTERNAL ANNOUNCEMENT DEVÝCES CONFIGURED.
F24:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTG: 1-<max>
F25:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTU: 1-<xx>, <yy>-<max>
F26:	<xxxxxxxxxxxx> PEN ERROR; SLOT FORMALLY INCORRECT
F27:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE CIRCUIT NUMBERS: <0-<cct_max>/<n>, <m>, ...>
F29:	<xxxxxxxxxxxx> THE DEVICE CONFIGURATION DVCFIG DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F30:	<xxxxxxxxxxxx> THE STATION IS CAMP-ON BLOCKED. OPTIONS: - REPEAT COMMAND LATER - REPEAT COMMAND WITH IMMEDIATE DEACTIVATION (OFFTYPE=DI) - FIRST DEACTIVATE BY DEACT-DSSU:OFFTYPE=DI,....; AND REPEAT COMMAND
F32:	<xxxxxxxxxxxx> THE STATION MUST BE DEACTIVATED. OPTIONS: - REPEAT COMMAND WITH DEACTIVATION (OFFTYPE=DC/DI) - FIRST DEACTIVATE BY DEACT-DSSU:OFFTYPE=DC/DI,...; AND REPEAT COMMAND
F34:	<xxxxxxxxxxxx> NO MODULE HAS BEEN ASSIGNED FOR THE SPECIFIED PEN.
F35:	<xxxxxxxxxxxx> IN ADDITION TO THE DVCFIG VALUE <dvcfig>, THE PARAMETER <param> MUST ALSO BE SPECIFIED
F39:	<xxxxxxxxxxxx> THE <STATION/NEW STATION\|PRIMARY STATION> NUMBER IS AN EXTERNAL STATION NUMBER
F40:	<xxxxxxxxxxxx> THE TERMINAL IS NOT PROCESSED BY AMO SSCSU
F41:	<xxxxxxxxxxxx> VALUE FOR PARAMETER OPT DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F51:	THE STATION NUMBER RANGE <xxxxxxxxxxxx> - <yyyyyyyyyyyy> CONTAINS NO VALID STATION NUMBER
F55:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED WITH <OPT>=<HTB/TC>
F57:	<xxxxxxxxxxxx> THE ADD-ON DEVICES MAY ONLY BE REMOVED, IF ALL AFFECTED KEY FUNCTIONS ARE SET TO VACANT" (AMO TAPRO)"
F58:	<xxxxxxxxxxxx> THIS STATION IS ALREADY ASSIGNED BY AMO <ACSU/RUFUM/SCSU/SBCSU/DNIT>
F60:	<xxxxxxxxxxxx> ALARMNO <nnnn> IS NOT YET ASSIGNED (AMO-VADSU).
F71:	<xxxxxxxxxxxx> FOR ADDING A DVCFIG=<HTBMNGR> ONLY A SINGLE STATION NUMBER IS ALLOWED.
F72:	<xxxxxxxxxxxx> DVCFIG=<HTBMNGR/HTBPHONE>: ONLY A COMBINATION OF VOICE AND DTE DEVICE IS ALLOWED.
F73:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT IS STILL REFERENCED IN THE ACD ROUTING TABLES. DELETE THE STATION BY AMO ACDRT FROM ACD ROUTING TABLE <nnnnn> BEFORE REPEATING THIS COMMAND.
F74:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT HAS STILL ASSIGNED AT LEAST ONE ACD ATTRIBUTE. DELETE THE ATTRIBUTES BY AMO SDAT BEFORE REPEATING THIS COMMAND. (CHA-SDAT:STNO=<xxxxxxxxxxxx>,TYPE=ATTRIBUT, DATTR=AGENT&SUPER&AUTOLOG&CAF;)
F75:	<xxxxxxxxxxxx> THE STATION COULD NOT BE ADDED BECAUSE NO VIRTUAL NODE ID HAS BEEN CONFIGURED. PLEASE ADD VIRTUAL NODE ID USING AMO KNDEF (TYPE=OWN).
F77:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED BECAUSE THE REQUIRED CONFIRMATION BY CALL PROCESSING HAS NOT BEEN RECEIVED YET. PLEASE REPEAT COMMAND LATER.
F78:	<xxxxxxxxxxxx> FOR SUBSCRIBERS WITH DVCFIG=TCEXT THE ATTRIBUTE SPECAR MUST BE SET IN COS 1 AND 2.
F80:	<xxxxxxxxxxxx> THE PEN IS SIGNED OFF. SSCSU SUBSCRIBERS ARE NOT CONFIGURABLE AT SIGNED OFF PORTS.
F92:	<xxxxxxxxxxxx>: THE STATION CANNOT BE DELETED BECAUSE OF LAW AND SECURITY REASONS. PLEASE CONTACT YOUR SYSTEM ADMINISTRATOR.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.