168.4.1 Error Messages


F01:	<xxxxxx> THIS CALL NUMBER IS NOT CONFIGURED IN THE DIAL PLAN (DPLN).
F02:	<xxxxxx> THE COS <nnnn> IS NOT YET ASSIGNED.
F03:	<xxxxxx> THIS STATION HAS NOT YET BEEN CONFIGURED.
F04:	<xxxxxx> THIS STATION CANNOT BE CONFIGURED WITH THE DVCFIG VALUES SPECIFIED. UNABLE TO FIND FREE <SLMA/SLMB/SLMA1/2/3/24/B/SLMAR>.
F05:	<xxxxxx> THE PEN SPECIFIED FOR THIS STATION IS ALREADY OCCUPIED.
F06:	<xxxxxx> THIS STATION IS ALREADY CONFIGURED.
F07:	<xxxxxx> FOR DEVICE TYPE <DIGITE>, <KEYSTN/SUFDIAL/SOD> IS NOT ALLOWED.
F08:	<xxxxxx> FOR STATIONS WITH SPECIAL EQUIPMENT AS WELL AS FOR VOICE PAGERS, DVCFIG MUST BE ANATE.
F09:	<xxxxxx> THE NEW CALL NUMBER HAS NOT BEEN CONFIGURED IN THE DIAL PLAN (AMO WABE).
F10:	<LTG/LTU> IS NOT CONFIGURED.
F11:	<xxxxxx> THE <LCOSV/LCOSD> <nnnn> IS NOT ASSIGNED.
F12:	<xxxxxx> INADMISSIBLE DEVICE COMBINATION SPECIFIED IN DVCFIG PARAMETER.
F13:	<xxxxxx> THE STATION CANNOT BE PROCESSED. NO FREE SPACE IN <SU/LODEN/DTILTG/STN/DSSNA/AUXDIGI/BLK100> FEATURE MEMORY.
F15:	<xxxxxx> THIS STATION IS CONFIGURED IN THE CALL PICKUP GROUP <nnnn>. PLEASE MODIFY THE CALL PICKUP GROUP ENTRY BEFORE PROCESSING.
F16:	<xxxxxx> THIS STATION IS CONFIGURED IN A <VOICE/FAX/DTE> HUNTING GROUP. PLEASE MODIFY THE HUNTING GROUP ENTRY BEFORE PROCESSING.
F17:	<xxxxxx> FOR STATIONS WITH SPECIAL EQUIPMENT AS WELL AS FOR VOICE PAGERS, DVCFIG MUST BE ANATE.
F18:	<xxxxxx> THE STATION IS CONFIGURED IN NIGHT OPTION <nnn>. PLEASE MODIFY THE NIGHT OPTION ENTRY BEFORE PROCESSING.
F20:	<xxxxxx> HMUSIC <nnn> IS NOT YET ASSIGNED ( ADD-RCSU: RECAPL=HMUSIC, ).
F22:	<xxxxxx> THE MAXIMUM PLANNED NUMBER OF STATIONS HAS BEEN REACHED. THE NUMBER OF STATIONS ALLOWED CAN BE INCREASED WITH AMO DIMSU.
F24:	<xxxxxx> THE NEW CALL NUMBER IS ALREADY CONFIGURED.
F27:	<xxxxxx> INADMISSIBLE <LTG/LTU/SLOT/CCT> VALUE ENTERED IN PEN PARAMETER.
F29:	<xxxxxx> THE DEVICE CONFIGURATION ENTERED CANNOT BE CONFIGURED AT THE EXISTING PEN (WRONG BOARD TYPE OR NO BOARD PLUGGED).
F30:	<xxxxxx> THE STATION IS ONLY PREBLOCKED. OPTIONS: - REPEAT COMMAND LATER - REPEAT COMMAND WITH IMMEDIATE DEACTIVATION (OFFTYPE=DI) - FIRST DEACTIVATE STATION BY: DEACT-DSSU:OFFTYPE=DI,...; AND REPEAT COMMAND
F31:	<xxxxxx> THE STATION HAS BEEN BLOCKED BUT IT REMAINS STILL BUSY FOR CALL PROCESSING. PLEASE REPEAT COMMAND LATER.
F32:	<xxxxxx> THE STATION MUST BE BLOCKED. OPTIONS: - REPEAT COMMAND WITH DEACTIVATION (OFFTYPE=DC/DI) - FIRST DEACTIVATE STATION BY: DEACT-DSSU:OFFTYPE=DC/DI,...; AND REPEAT COMMAND
F37:	<xxxxxx> WAS ASSIGNED USING AMO <ACSU/SBCSU/SSCSU/DNIT>; PLEASE USE THIS AMO FOR FURTHER PROCESSING.
F38:	<xxxxxx> THE SPEC VALUES KEYSTN AND IDCR MAY NEITHER BE SPECIFIED TOGETHER NOR BE COMBINED WITH OTHER SPEC VALUES.
F39:	<xxxxxx> THE SPEC VALUES WITNS, SUFDIAL AND SOD MAY ONLY BE COMBINED WITH SPEC VALUE SSTN OR VCEPAGE.
F41:	<xxxxxx> THIS STATION IS ALREADY ASSIGNED BY AMO <ACSU/SBCSU/SSCSU/DNIT>.
F42:	<xxxxxx> THIS STATION IS ASSIGNED AS AN EXTERNAL STATION.
F43:	<xxxxxx> SPEC = WITNS MUST NOT BE CHANGED BECAUSE STATION IS ALLOCATED TYPE = LSTNR IN AMO VBZGR.
F44:	<xxxxxx> THE FOLLOWING DHPAR VALUES ONLY ARE POSSIBLE FOR SPEC = (SUFDIAL OR SOD): PREDIA, ASEND, BSEND, DTMFSTN, RING1.
F45:	<xxxxxx> THE FOLLOWING DHPAR VALUES ONLY ARE POSSIBLE FOR SPEC /= (SUFDIAL OR SOD): LEDSIGN, VMSDP, FLASH, MWLED.
F47	<xxxxxx> STATION IS MAPPED TO STATION NO. <yyyyyy> VIA AMO-RUFUM; PLEASE USE THIS AMO FOR FURTHER PROCESSING.
F48:	<xxxxxx> STATION CANNOT BE ASSIGNED. VIRTUAL LINE MEMORY SPACE EXCEEDED.
F53:	<xxxxxx> ALARMNO <nnnn> IS NOT YET ASSIGNED (AMO-VADSU).
F58:	INS = SIGNOFF IS ONLY ALLOWED FOR DVCFIG = ANATE
F59:	<xxxxxx> THE SLMA BOARD CONFIGURED AT THIS PEN CANNOT PERFORM VARIABLE DIALING TYPE RECOGNITION. ONLY DIALING TYPE DP OR DTMF IS ALLOWED.
F60:	<xxxxxx> ALL PARAMETERS HAVE BEEN IGNORED. STATION DATA ARE NOT CHANGED.
F61:	<xxxxxx> IN PARAMETER DHPAR THE VALUES LEDSIGN AND MWLED ARE NOT ALLOWED TO BE COMBINED.
F62:	<xxxxxx> THE SLMA BOARD CONFIGURED AT THIS PEN IS NOT COMPATIBLE WITH DHPAR VALUES (SLMA1, SLMA2, SLMA3, SLMA24 OR SLMAB IS NECESSARY).
F63	<xxxxxx> THE SUBSCRIBER CANNOT BE ADDED; FLEX+TDM LICENCES <nnnnn> IS REACHED. PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES. PLEASE CONTACT YOUR SERVICE CENTER IF YOU WISH TO ADD MORE SUBSCRIBERS CHANGE-CODEW:TRIAL=YES MAY ACTIVATE A TIME LIMITED TRIAL MODE.
F64:	<xxxxxx> IN ADDITION TO DVCFIG = <ANATECM> THE PARAMETER <PULSTYPE/PULSLEV> MUST ALSO BE SPECIFIED.
F65:	<xxxxxx> DVCFIG = <ANATECM> IS NOT ALLOWED AS FLOATING STATION OR ACL SUPPORT STATION.
F66:	<xxxxxx> THE STATION CANNOT BE PROCESSED. IT IS STILL REFERENCED BY THE ACD ROUTING TABLES. DELETE THE STATION BY AMO ACDRT FROM ACD ROUTING TABLE <nnnnn> BEFORE REPEATING THIS COMMAND.
F67:	<xxxxxx> THE STATION CANNOT BE PROCESSED. IT HAS STILL ASSIGNED AT LEAST ONE ACD-ATTRIBUTE. DELETE THE ATTRIBUTES BY AMO SDAT BEFORE REPEATING THIS COMMAND. (CHANGE-SDAT:STNO=<xxxxxx>,TYPE=ATTRIBUTE,DATTR=AGENT&SUPER&AUTOLOG&CAF)
F68:	<xxxxxx> THE STATION CANNOT BE DELETED BECAUSE OF LAW AND SECURITY REASONS. PLEASE CONTACT YOUR SYSTEM ADMINISTRATOR.
F69:	<xxxxxx> THE SPECIFIED CONNECTION TYPE (PARAMETER ANSCHL)CANNOT BE CONFIGURED AT THE EXISTING PEN (WRONG BOARD TYPE ).
F70:	<xxxxxx> THE STATION COULD NOT BE ADDED BECAUSE NO VIRTUAL NODE ID HAS BEEN CONFIGURED. PLEASE ADD VIRTUAL NODE ID USING AMO KNDEF (TYPE=OWN).
F71:	<xxxxxx> THE STATION CANNOT BE PROCESSED BECAUSE THE REQUIRED CONFIRMATION BY CALL PROCESSING HAS NOT BEEN RECEIVED YET. PLEASE REPEAT COMMAND LATER.
F72:	<xxxxxx> THE FICTITIOUS AUXDIGI STATION CANNOT BE DELETED BECAUSE IT IS ALREADY IN USE. OPTIONS: - REPEAT COMMAND LATER - REPEAT COMMAND WITH IMMEDIATE DEACTIVATION (OFFTYPE=DI)
F73:	ITR GROUP OF @@@@@@@@@@@@ CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F74:	DPLN GROUP OF @@@@@@@@@@@@ CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F75:	COSX GROUP OF @@@@@@@@@@@@ CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP
F76:	<xxxxxxxxxxxx> THE FICTITIOUS AUXDIGI STATION CANNOT BE DELETED BECAUSE IT IS STILL USED IN AMO-DCIC. BEFORE DELETING THE STATION, DELETE THE CONFIGURATION IN AMO-DCIC
F77:	<xxxxxxxxxxxx> DPLN @@@ IS NOT ALLOWED FOR NODE <xxxxxxxxxxxx>.
F78:	IT IS NOT ALLOWED TO CONFIGURE SUBSCRIBERS FOR TMDNH (BOS) BOARDS SINCE TRUNKS ARE ALREADY CONFIGURED ON IT

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.