2.4.1 Error Messages


F01:	MEMORY RESERVED FOR ACD GROUPS IS INSUFFICIENT. ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND:.
	ADD-DIMSU:ACDGRP=<?>;
F02:	ACD GROUP ACDGRP=@@@ HAS ALREADY BEEN CREATED.
F03:	THE FOLLOWING RESTRICTIONS MUST HOLD AMONG THE LED ACTIVIZATION THRESHOLD VALUES: ON:@@@ < FLASH:@@@ < WINK:@@@.
F05:	SUPERVISOR SUPEXT=@@@@@@ IS NOT CONFIGURED.
	(SEE AMOS SBCSU,STNO)
F07:	STATION NUMBER SUPEXT=@@@@@@ HAS BEEN CONFIGURED AS A FLOATING STATION.
	(SEE AMO SCSU,INS=FLOAT)
F09:	SUBSCRIBER SUPEXT=@@@@@@ HAS NO SUPERVISOR CLASSMARK. ADD REQUIRED CLASSMARK WITH THE FOLLOWING COMMAND:
	CHANGE-SDAT:STNO=@@@@@@,TYPE=ATTRIBUT,AATTR=SUPER;
F10:	THE ACD GROUP WAS ADDED AS A PRIMARY GROUP. IT CAN BE ASSIGNED TO A DIFFERENT SUPERVISOR ONLY AFTER ASSIGNING AN OTHER GROUP TO BE THE PRIMARY GROUP OF SUPERVISOR SUPEXT=@@@.
F11:	ACD GROUP ACDGRP=@@@ IS STILL REFERENCED BY ACD ROUTING TABLES. ENTER COMMAND 'DISP-ACDRT;' AND SEARCH FOR ENTRIES HAVING THE WORDS 'ACDGRP', 'CACDGRP' IN THE OUTPUT COLUMN MARKED BY HEADER 'PARAMETER'. (ACTION=RTGRP/COND)".
F12:	THE ACD GROUP ACDGRP=@@@ IS NOT CONFIGURED.
F13:	THE SPECIFIED ACD GROUP IS CONFIGURED AS A PRIMARY GROUP. IT CAN BE DELETED ONLY AFTER ASSIGNING AN OTHER GROUP TO BE THE PRIMARY GROUP OF SUPERVISOR SUPEXT=@@@@@@
F14:	THE SPECIFIED ACD GROUP CAN BE DELETED ONLY AFTER DELETING THE AGENTS STILL ASSIGNED TO IT. DISPLAY THE GROUP'S AGENTS WITH THE FOLLOWING COMMAND: DISP-AGENT:ACDGRP=@@@.
F15:	THE SPECIFIED ACD GROUP IS CONFIGURED AS A PRIMARY GROUP. IT CAN BE CHANGED INTO A NORMAL GROUP BY ASSIGNING AN OTHER GROUP TO BE THE PRIMARY GROUP OF SUPERVISOR SUPEXT=@@@@@@.
F16:	ACD FEATURE IS BLOCKED. ACTIVATE IT WITH THE FOLLOWING COMMAND:.
	CHANGE-ZAND:TYPE=ACD,ACDALLOW=YES;
F17:	COULD NOT BLOCK ACD GROUP ACDGRP=@@@.
	(NEGATIVE ACKNOWLEDGEMENT FROM CALL PROCESSING)
F19:	THE GIVEN PMSAN IS NOT SET. SET IT WITH: ADD-RICHT:PM,<IDX>,,,<SAN>,<NAME>; A NUMBER BETWEEN 1-10 MUST BE ENTERED FOR IDX SAN VALUE MUST BE EQUAL TO THE PMSAN OF AMO-ACDGP
F20:	DELETION NOT ALLOWED. ACD PM GROUP @@@ IS ASSOCIATED WITH TRUNK GROUP @@.
F21:	IT IS NOT ALLOWED TO CHANGE THE TYPE OF AN ACD GROUP
F22:	GROUP PILOT NUMBER GRPPN @@@@@@ IS NOT A VALID DIRECTORY NUMBER CONFIGURED WITH AMO DNIT ROUTING=DRTD ODER DRTSDA.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.