181.4.1 Error Messages


F01:	<xxxxxxxxxxxx> THIS STATION NUMBER IS NOT ASSIGNED IN THE DIAL PLAN (DPLN)
F02:	<xxxxxxxxxxxx> THE COS <nnnn> IS NOT ASSIGNED
F03:	<xxxxxxxxxxxx> THIS STATION IS NOT ASSIGNED
F04:	<xxxxxxxxxxxx> THIS STATION CANNOT BE ASSIGNED WITH THE DVCFIG VALUES SPECIFIED.UNABLE TO FIND AVAILABLE <WAML2,SLMY>
F05:	<xxxxxxxxxxxx> THE PEN SPECIFIED FOR THIS STATION IS ALREADY OCCUPIED
F06:	<xxxxxxxxxxxx> THIS STATION IS ALREADY ASSIGNED
F07:	@@@@@@@@@@@@ NO STATION DATA CHANGED
F09:	<xxxxxxxxxxxx> THE NEW NUMBER IS NOT ASSIGNED IN THE DIAL PLAN (AMO WABE)
F10:	<LTG/LTU> IS NOT ASSIGNED
F11:	@@@@@@@@@@@@ THE SUBSCRIBER CANNOT BE ADDED; THE CONTRACTED NUMBER OF @@@@@@@@@@@@@@@@@@@@@@@@@@@@ @@@@@ IS REACHED.
F12:	@@@@@@@@@@@@ INADMISSIBLE DEVICE COMBINATION SPECIFIED IN DVCFIG PARAMETER
F13:	<xxxxxxxxxxxx> INSUFFICIENT MEMORY SPACE (AMO DIMSU: PARAMETER <param>) <param>: CRICC/DSSNA/DTILTG/TEAMCONN/LODEN/OPTCC/OPTEXP/BLK100/STN/BUS/ AUXDIGI
F14:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED IN THE EXECUTIVE TELEPHONE SYSTEM <nnnn>. CHANGE THE EXECUTIVE CONFIGURATION BEFORE REPEATING THIS COMMAND
F15:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED IN THE CALL PICKUP GROUP <nnnnn>. CHANGE THE CALL PICKUP GROUP ENTRY BEFORE REPEATING THIS COMMAND
F16:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED IN A VCR HUNTING GROUP. CHANGE THE HUNTING GROUP ENTRY BEFORE REPEATING THIS COMMAND
F18:	<xxxxxxxxxxxx> THE STATION IS ASSIGNED IN NIGHT OPTION <nnnnn>. CHANGE THE NIGHT OPTION ENTRY BEFORE REPEATING THIS COMMAND
F19:	@@@@@@@@@@@@ THIS STATION IS NOT AUTHORIZED FOR THE COMMUNICATION SERVICE @@@
F20:	<xxxxxxxxxxxx> HMUSIC <nnnn> IS NOT YET ASSIGNED ( ADD-RCSU:RECAPL=HMUSIC, ).
F23:	<xxxxxxxxxxxx> THE NEW NUMBER IS ALREADY ASSIGNED
F24:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTG: 1-<max>
F25:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTU: 1-<xx>, <yy>-<max>
F26:	<xxxxxxxxxxxx> PEN ERROR; SLOT FORMALLY INCORRECT
F27:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE CIRCUIT NUMBERS: <0-<cct_max>/<n>, <m>, ...>
F29:	<xxxxxxxxxxxx> THE DEVICE CONFIGURATION DVCFIG DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F30:	<xxxxxxxxxxxx> THE STATION IS CAMP-ON BLOCKED. OPTIONS: - REPEAT COMMAND LATER - REPEAT COMMAND WITH IMMEDIATE DEACTIVATION (OFFTYPE=DI) - FIRST DEACTIVATE BY DEACT-DSSU:OFFTYPE=DI,....; AND REPEAT COMMAND
F32:	<xxxxxxxxxxxx> THE STATION MUST BE DEACTIVATED. OPTIONS: - REPEAT COMMAND WITH DEACTIVATION (OFFTYPE=DC/DI) - FIRST DEACTIVATE BY DEACT-DSSU:OFFTYPE=DC/DI,...; AND REPEAT COMMAND
F34:	<xxxxxxxxxxxx> NO MODULE HAS BEEN ASSIGNED FOR THE SPECIFIED PEN.
F35:	<xxxxxxxxxxxx> IN ADDITION TO THE DVCFIG VALUE <dvcfig>, THE PARAMETER <param> MUST ALSO BE SPECIFIED
F36:	@@@@@@@@@@@@ THE PRIMARY STATION NUMBER DOES NOT EXIST
F39:	<xxxxxxxxxxxx> THE <STATION/NEW STATION\|PRIMARY STATION> NUMBER IS AN EXTERNAL STATION NUMBER
F40:	<xxxxxxxxxxxx> THE TERMINAL IS NOT PROCESSED BY AMO SSCSU
F41:	<xxxxxxxxxxxx> VALUE FOR PARAMETER OPT DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F43:	@@@@@@@@@@@@ THE PRIMARY STATION NUMBER MAY NOT BE DELETED, BECAUSE A @@@@@@@@@@@@@@@@@@@@@@@@ IS STILL ASSIGNED
F44:	@@@@@@@@@@@@ THE DEVICE @@@@@@@@ CANNOT BE ASSIGNED AT THE SPECIFIED PEN @@-@@-@@@-@@@, SINCE A @@@@@@@@ IS ALREADY ASSIGNED TO THIS CONFIGURATION
F46:	@@@@@@@@@@@@ A MAXIMUM OF @@@ STATION NUMBERS MAY BE ASSIGNED TO A @@@@@@@@ CONFIGURATION
F47:	@@@@@@@@@@@@ A MAXIMUM OF @@@ TERMINALS MAY BE ASSIGNED TO A @@@@@@@@ CONFIGURATION
F48:	@@@@@@@@@@@@ INSUFFICIENT LINE MEMORY SPACE FOR VIRTUAL LINES
F51:	THE STATION NUMBER RANGE <xxxxxxxxxxxx> - <yyyyyyyyyyyy> CONTAINS NO VALID STATION NUMBER
F53:	@@@@@@@@@@@@ THE SERVICE @@@ IS ALREADY ASSIGNED
F55:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED WITH <OPT>=<HTB/TC>
F56:	@@@@@@@@@@@@ THE STATION TO BE ASSOCIATED HAS AN INADMISSIBLE DEVICE TYPE
F57:	<xxxxxxxxxxxx> THE ADD-ON DEVICES MAY ONLY BE REMOVED, IF ALL AFFECTED KEY FUNCTIONS ARE SET TO "VACANT" (AMO TAPRO)
F58:	<xxxxxxxxxxxx> THIS STATION IS ALREADY ASSIGNED BY AMO <ACSU/RUFUM/SCSU/SBCSU/DNIT>
F60:	<xxxxxxxxxxxx> ALARMNO <nnnn> IS NOT YET ASSIGNED (AMO-VADSU).
F69:	@@@@@@@@@@@@ STNO IS A MSN STATION NUMBER WHICH CAN ONLY BE DELETED WITH SVC=MSN.
F71:	<xxxxxxxxxxxx> FOR ADDING A DVCFIG=<HTBMNGR> ONLY A SINGLE STATION NUMBER IS ALLOWED.
F72:	<xxxxxxxxxxxx> DVCFIG=<HTBMNGR/HTBPHONE>: ONLY A COMBINATION OF VOICE AND DTE DEVICE IS ALLOWED.
F73:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT IS STILL REFERENCED IN THE ACD ROUTING TABLES. DELETE THE STATION BY AMO ACDRT FROM ACD ROUTING TABLE <nnnnn> BEFORE REPEATING THIS COMMAND.
F74:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT HAS STILL ASSIGNED AT LEAST ONE ACD ATTRIBUTE. DELETE THE ATTRIBUTES BY AMO SDAT BEFORE REPEATING THIS COMMAND. (CHA-SDAT:STNO=<xxxxxxxxxxxx>,TYPE=ATTRIBUT, DATTR=AGENT&SUPER&AUTOLOG&CAF;)
F75:	<xxxxxxxxxxxx> THE STATION COULD NOT BE ADDED BECAUSE NO VIRTUAL NODE ID HAS BEEN CONFIGURED. PLEASE ADD VIRTUAL NODE ID USING AMO KNDEF (TYPE=OWN).
F77:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED BECAUSE THE REQUIRED CONFIRMATION BY CALL PROCESSING HAS NOT BEEN RECEIVED YET. PLEASE REPEAT COMMAND LATER.
F78:	<xxxxxxxxxxxx> FOR SUBSCRIBERS WITH DVCFIG=TCEXT THE ATTRIBUTE SPECAR MUST BE SET IN COS 1 AND 2.
F80:	<xxxxxxxxxxxx> THE PEN IS SIGNED OFF. SSCSU SUBSCRIBERS ARE NOT CONFIGURABLE AT SIGNED OFF PORTS.
F85:	@@@@@@@@@@@@ FOR DVCFIG=@@@@@@@@ @@@@@@@@@@@@@@@@@@@@ ONLY ADDON=@@@ IS POSSIBLE.
F86:	@@@@@@@@@@@@ FOR DVCFIG=@@@@@@@@ ONLY @@@ TERMINAL ADAPTERS ARE POSSIBLE.
F87:	@@@@@@@@@@@@ FUNCTIONAL TERMINALS CAN ONLY BE SET UP UNDER ONE STATION NUMBER IN THE OPTISET CONFIGURATION. THIS IS THE REASON WHY SET UP UNDER STATION NUMBER @@@@@@@@@@@@ . TO BE ABLE TO ALSO ACCESS THESE TERMINALS UNDER @@@@@@@@@@@@, THE COMMAND ADD-SBC
F88:	@@@@@@@@@@@@ AN OPTISET CONFIGURATION ON THE SLMQ MODULE CANNOT BE EXTENDED TO INCLUDE ADDITIONAL DEVICES.
F89:	@@@@@@@@@@@@ A MAXIMUM NUMBER OF @@@ @@@@@@@@ DEVICES CAN BE SET UP IN THE @@@@@@@@ CONFIGURATION.
F90:	@@@@@@@@@@@@ FOR A SIGNED OFF STATION DVCFIG=@@@@@@@@ IS NOT ALLOWED.
F92:	<xxxxxxxxxxxx>: THE STATION CANNOT BE DELETED BECAUSE OF LAW AND SECURITY REASONS. PLEASE CONTACT YOUR SYSTEM ADMINISTRATOR.
F94:	@@@@@@@@@@@@ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ MAY NOT BE SIGNED OFF.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.