166.4.1 Error Messages


F01:	<xxxxxxxxxxxx> THIS STATION NUMBER IS NOT PROPERLY ASSIGNED (AMO WABE AND AMO KNDEF)
F01:	<xxxxxxxxxxxx> THIS STATION NUMBER IS NOT ASSIGNED IN THE DIAL PLAN (DPLN) RESP. IS NOT ASSIGNED FOR A STATION (DAR=STN) ( DISP-WABE:TYPE=GEN,CD=<xxxxxxxxxxxx>,DPLN=0&&15; )
F02:	<xxxxxxxxxxxx> THE <COS/LCOSV/LCOSD> <nnnn> IS NOT ASSIGNED
F03:	<xxxxxxxxxxxx> THIS STATION IS NOT ASSIGNED
F04:	<xxxxxxxxxxxx>THIS STATION CANNOT BE ASSIGNED WITH THE DVCFIG VALUES SPECIFIED. UNABLE TO FIND AVAILABLE <DIU-N2/DIU-N4/DIU-S2/SLMC/ SLMO/SLMO (FCTID=1)/ SLMQ/SLMQ+/SLMQ3/SLMS/ STMA (FCTID=4)/STMD/ STMI-HFA (FCTID=3)/STMI2-HFA (FCTID=3)> IN ANY LTU SHELF WITH SOURCE GROUP 1 ASSIGNED
F05:	<xxxxxxxxxxxx> THE PEN SPECIFIED FOR THIS STATION IS ALREADY OCCUPIED ( REGEN-<ACSU/SBCSU/SSCSU>:<yyyyyyyyyyyy>; ) ( REGEN-TDCSU:<g-uu-sss-ccc>; )
F06:	<xxxxxxxxxxxx> THIS STATION IS ALREADY ASSIGNED
F08:	<xxxxxxxxxxxx> ONLY CMI SUBSCRIBERS CAN BE CONFIGURED WITH AMO SBCSU ON THIS ’CORDLESS ES’ PABX
F09:	<xxxxxxxxxxxx> THE NEW NUMBER IS NOT ASSIGNED IN THE DIAL PLAN (AMO WABE)
F10:	<LTG/LTU> IS NOT ASSIGNED
F11:	<xxxxxxxxxxxx> THIS STATION CANNOT BE ASSIGNED - THE CONTRACTED NUMBER OF SUBSCRIBERS FOR <PACKAGE ’FLEX LICENSE’ / PACKAGE ’CORDLESS E’ > = <nnnnn> IS REACHED. PLEASE USE DISP-CODEW FOR DISPLAY OF THE CONTRACTED FEATURE PACKAGES. PLEASE CONTACT YOUR SERVICE CENTER IF YOU WISH TO ADD MORE SUBSCRIBERS. ****** PLEASE NOTE : ********************************************* CHANGE-CODEW:TRIAL=YES; MAY ACTIVATE A TIME LIMITED TRIAL MODE. *********************************************************************
F12:	<xxxxxxxxxxxx> INADMISSIBLE DEVICE COMBINATION SPECIFIED IN DVCFIG PARAMETER
F13:	<xxxxxxxxxxxx> INSUFFICIENT MEMORY SPACE ( ADD-DIMSU:<param> > <nnnnn>; ) <param>: API/AUXDIGI/BLK100/BUS/CALLOG/CRICC/DSSNA/DTILTG/ESSTN/ LODEN/LODS0/OPTCC/OPTEXP/STMACIR/STN/SU/S2BCHL/WSPROT
F14:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED IN THE EXECUTIVE TELEPHONE SYSTEM <nnnn>. CHANGE THE EXECUTIVE CONFIGURATION BEFORE REPEATING THIS COMMAND
F15:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED IN THE CALL PICKUP GROUP <nnnn>. CHANGE THE CALL PICKUP GROUP ENTRY BEFORE REPEATING THIS COMMAND
F16:	<xxxxxxxxxxxx> THIS STATION IS ASSIGNED IN A <VOICE/FAX/DTE> HUNTING GROUP. CHANGE THE HUNTING GROUP ENTRY BEFORE REPEATING THIS COMMAND
F18:	<xxxxxxxxxxxx> THE STATION IS ASSIGNED IN NIGHT OPTION <nnnn>. CHANGE THE NIGHT OPTION ENTRY BEFORE REPEATING THIS COMMAND
F19:	<xxxxxxxxxxxx> THIS STATION IS NOT AUTHORIZED FOR THE COMMUNICATION SERVICE <FAX/DTE/MSN>
F20:	<xxxxxxxxxxxx> HMUSIC <nnnn> IS NOT YET ASSIGNED ( ADD-RCSU:RECAPL=HMUSIC, )
F21:	<xxxxxxxxxxxx> THE MAXIMUM PLANNED NUMBER OF STATIONS HAS BEEN REACHED. THE NUMBER OF STATIONS ALLOWED CAN BE INCREASED WITH AMO DIMSU
F22:	<xxxxxxxxxxxx> THE <BASICSVC/TSI> VALUE <xxxxxxxx> <HAS BEEN ENTERED MORE THAN ONCE/IS OBSOLETE/IS INVALID/HAS ALREADY BEEN USED>
F23:	<xxxxxxxxxxxx> THE NEW NUMBER IS ALREADY ASSIGNED
F24:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTG: 1-<ltg_max>
F25:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE RANGE FOR LTU: 1-<ltu_hhs_max>, 17-99
F26:	<xxxxxxxxxxxx> PEN ERROR; SLOT <DOES NOT EXISTS/INVALID>
F27:	<xxxxxxxxxxxx> PEN ERROR; PERMISSIBLE CIRCUIT NUMBERS: <circno_min>, ..., <circno_max>
F28:	<xxxxxxxxxxxx> THIS STATION CANNOT BE DELETED WHILE IT BELONGS TO A COM GROUP ( DISP-COMGR:TYPE=STN,STNO=@@@@@@@@@@@@; RESP. DEL-COMGR:STNO=@@@@@@@@@@@@; )
F29:	<xxxxxxxxxxxx> THE DEVICE CONFIGURATION DVCFIG DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F30:	<xxxxxxxxxxxx> THE <STATION/MAIN STATION NUMBER> IS STILL BUSY FOR CALL PROCESSING. REPEAT COMMAND LATER OR DEACTIVATED IMMEDIATLY ( <I.E. REPEAT COMMAND BUT USE OFFTYPE=DI / DEACT-DSSU:OFFTYPE=DI,TYPE=STNO,STNO=@@@@@@@@@@@@;> )
F32:	<xxxxxxxxxxxx> THE <STATION/MAIN STATION NUMBER> MUST BE DEACTIVATED ( <I.E. REPEAT COMMAND BUT USE OFFTYPE=DC/DI / DEACT-DSSU:OFFTYPE=DC,TYPE=STNO,STNO=@@@@@@@@@@@@;> )
F33:	<xxxxxxxxxxxx> <FPROT/DPROT>=SBNIBRI CANNOT BE SPECIFIED IF OPT=CMI
F34:	<xxxxxxxxxxxx> EITHER NO MODULE OR A MODULE WITHOUT CIRCUITS HAS BEEN ASSIGNED FOR THE SPECIFIED PEN ( DISP-BCSU:TYPE=TBL,LTG=<g>,LTU=<uu>,SLOT=<sss>; )
F35:	<xxxxxxxxxxxx> IN ADDITION TO <CONN/DVCFIG/SPROT/DPROT/FPROT> = <conn/dvcfiprot>, THE PARAMETER <param> MUST ALSO BE SPECIFIED <conn>: ATMPSW <dvcfig>: DTE\|FAX\|SET600\|EXTLINE\|API <prot> : SBNRBRI <param> : DPROT\|FPROT\|SPROT\|VPI\|VCI
F36:	<xxxxxxxxxxxx> THE MAIN STATION NUMBER DOES NOT EXIST
F39:	<xxxxxxxxxxxx> THE <STATION/MAIN STATION/NEW STATION> NUMBER IS AN EXTERNAL STATION NUMBER
F40:	<xxxxxxxxxxxx> THE TERMINAL IS NOT PROCESSED BY AMO SBCSU
F41:	<xxxxxxxxxxxx> VALUE FOR PARAMETER OPT DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F42:	<xxxxxxxxxxxx> THE DEVICE CONNECTION TYPE CONN DOES NOT MATCH THE MODULE OF THE SPECIFIED PEN
F43:	<xxxxxxxxxxxx> THE MAIN STATION NUMBER MAY NOT BE DELETED, BECAUSE A <SECONDARY STATION NUMBER/MSN STATION NUMBER> IS STILL ASSIGNED
F44:	<xxxxxxxxxxxx> THE DEVICE <dvcfig> CANNOT BE ASSIGNED AT THE SPECIFIED PEN <g-uu-sss-ccc>, SINCE A <dvcfig> IS ALREADY ASSIGNED TO THIS CONFIGURATION <dvcfig>:API\|DTE\|FAX\|SET600
F45:	<xxxxxxxxxxxx> FOR A DEVICE WITH COM-MANAGER FUNCTIONALITY (OPTICOM=Y) ONLY APICLASS=TS CAN BE ASSIGNED
F46:	<xxxxxxxxxxxx> A MAXIMUM OF <4/3/2> STATION NUMBERS MAY BE ASSIGNED TO A <BUS/OPTI/CMI> CONFIGURATION
F47:	<xxxxxxxxxxxx> A MAXIMUM OF <8/3> TERMINALS MAY BE ASSIGNED TO A <BUS/OPTI> CONFIGURATION
F48:	<xxxxxxxxxxxx> NON-EXPANDABLE SYSTEM LIMIT OF @@@@@ AVAILABLE LINES REACHED FOR THIS EXPANSION STAGE ( DISP-DIMSU:TYPE=SYSTEM; ) - RELEASE LINES BY DELETING UNUSED MODULES, STATIONS, TRUNKS, ETC.
F49:	<xxxxxxxxxxxx> IT IS NOT ALLOWED TO ASSIGN A CALLOG TO AN OPTISET/OPTIP500/ OPTIIP WITHOUT DISPLAY (DIGNODIS=Y)
F50:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED WHILE PREPARED AS A KEYSYSTEM ( DEL-KCSU:STNO=<xxxxxxxxxxxx>; )
F51:	THE STATION NUMBER RANGE <xxxxxxxxxxxx> - <yyyyyyyyyyyy> CONTAINS NO VALID STATION NUMBER
F52:	<xxxxxxxxxxxx> THE ADD-ON DEVICES MAY ONLY BE REMOVED, IF ALL AFFECTED LINE KEYS WITH KYNO >= <kyno> HAVE BEEN RESET ( DISP-KCSU:STNO=<xxxxxxxxxxxx>,TYPE=PRIM; )
F53:	<xxxxxxxxxxxx> THE SERVICE <DTE\|FAX> IS ALREADY ASSIGNED
F54:	<xxxxxxxxxxxx> STMI2-HFA MODULE IS CURRENTLY DEFINED AS A STANDBY BOARD, WHICH CANNOT BE USED FOR SUBSCRIBER CONFIGURATION ( DISP-HFAB:MTYPE=STMIHFA2,LTU=<uu>,SLOT=<sss>; )
F55:	<xxxxxxxxxxxx> THE MAIN STATION NUMBER IS ASSIGNED WITH <OPT/DVCFIG>=<opt/dvcfig>
F56:	<xxxxxxxxxxxx> PARAMETER <SECAPPL/APMOBUSR> CAN ONLY BE SET FOR AN <OPTIP500/ OPTIIP> EQUIPPED WITH A SIGNATURE MODULE (IDCR=Y)
F57:	<xxxxxxxxxxxx> PARAMETER <REP/NEWNO> CANNOT BE PROCESSED WHILE THE STATION IS STILL MARKED AS <EXECUTIVE/SECRETARY> OF A (NETWIDE) TEAM ( CHANGE-SDAT:STNO=<xxxxxxxxxxxx>,TYPE=ATTRIBUT, DATTR=<TEAMEXEC/TEAMSECR>; )
F58:	<xxxxxxxxxxxx> THIS STATION IS ALREADY ASSIGNED BY AMO <ACSU/RUFUM/ SBCSU/SCSU/SSCSU>
F59:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED. IT IS ALREADY CONFIGURED IN THE EXECUTIVE TELEPHONE SYSTEM <mmmm> AS <EXECUTIVE/SECRETARY>
F60:	<xxxxxxxxxxxx> ALARMNO <nnnn> IS NOT YET ASSIGNED (AMO VADSU).
F61:	<xxxxxxxxxxxx> AN OPTISET/OPTIP500/OPTIIP NOT EQUIPPED WITH A DISPLAY (DIGNODIS=Y) MAY NOT BE RESERVED AS A SECRETARIAL STATION (SECR=Y)
F62:	<xxxxxxxxxxxx> DIGNODIS=Y MAY NOT BE SET SINCE STATION HAS BEEN RESERVED AS A SECRETARY OR ASSIGNED IN AN EXEC/SECR CONFIGURATION.
F63:	<xxxxxxxxxxxx> A KEYSYSTEM MAY NOT BE RESERVED AS A SECRETARIAL STATION ( DISP-KCSU:STNO=@@@@@@@@@@@@; )
F65:	<xxxxxxxxxxxx> FOR THE CONFIGURATION WITH MAINO <yyyyyyyyyyyy> NO FUNCTIONAL SERVICES HAVE BEEN ASSIGNED - THEREFORE MSN STATION NUMBERS CANNOT BE ASSIGNED.
F66:	<xxxxxxxxxxxx> FOR THE CONFIGURATION WITH MAINO <yyyyyyyyyyyy> A FUNCTIONAL DEVICE HAS BEEN ASSIGNED ONLY FOR SERVICE = VOICE - THEREFORE MSN STATION NUMBERS CANNOT BE ASSIGNED.
F67:	<xxxxxxxxxxxx> ONLY ONE OF THE ANALOG NON-VOICE TERMINALS ANADTE, ANAFAX CAN BE SPECIFIED
F68:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED BECAUSE THE NECESSARY TERMINAL ADAPTER <OPTIABA/OPTISPA> FOR CONNECTING <ANALOG DEVICES/THIS OPTISET/THIS OPTIP500> MUST NOT BE PLUGGED AT MAIN STATION NUMBER <yyyyyyyyyyyy> TOGETHER WITH THE ALREADY EXISTING TERMINAL ADAPTER <OPTISPA/OPTIABA>
F69:	<xxxxxxxxxxxx> STNO IS A MSN STATION NUMBER WHICH CAN ONLY BE DELETED WITH SVC=MSN.
F70:	<xxxxxxxxxxxx> STNO IS A MSN SECONDARY STATION NUMBER WHICH CAN ONLY BE DELETED WITH SVC=ALL RESP. SVC=MSN.
F71:	<xxxxxxxxxxxx> STNO IS MAIN STATION NUMBER OF A <BUS/OPTI/CMI> CONFIGURATION AND THEREFORE CANNOT BE DELETED WITH SVC=MSN - ALL OTHER SVC-VALUES ARE POSSIBLE IF CORRESPONDING DEVICES ARE ASSIGNED.
F72:	<xxxxxxxxxxxx> STNO IS NO MSN STATION NUMBER AND THEREFORE CANNOT BE DELETED WITH SVC=MSN - ALL OTHER SVC-VALUES ARE POSSIBLE IF CORRESPONDING DEVICES ARE ASSIGNED.
F73:	<xxxxxxxxxxxx> STNO HAS ALREADY BEEN ASSIGNED AS A MSN STATION NUMBER FOR <THE SERVICE/THE SERVICES> <VOICE/FAX/DTE>.
F74:	<xxxxxxxxxxxx> THIS STATION CANNOT BE PROCESSED WHILE THE RELATED MSN STATION NUMBER <yyyyyyyyyyyy> IS STILL ASSIGNED IN A <VOICE/FAX/DTE> HUNTING GROUP.
F76:	<xxxxxxxxxxxx> MEMORY SPACE FOR COMGRP @@@@@ IS NOT YET ASSIGNED ( ADD-DIMSU:COMGR=@@@@@; )
F77:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED BECAUSE THE REQUIRED CONFIRMATION BY CALL PROCESSING HAS NOT BEEN RECEIVED YET - REPEAT COMMAND LATER
F78:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED WHILE STILL ENTERED AS AN ACD ROUTING DESTINATION ( DISP-ACDRT:ART=<nnnnn>; )
F79:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED WHILE ACD ATTRIBUTES ARE STILL SET ( CHANGE-SDAT:STNO=<xxxxxxxxxxxx>,TYPE=ATTRIBUT, DATTR=SUPER&AGENT&AUTOLOG&CAF; )
F80:	<xxxxxxxxxxxx> THE STATION CANNOT BE PROCESSED WHILE STILL LOGGED IN AS A TELEWORKER - SIGNOFF VIA TELEWORKING SERVER BEFORE REPEATING THIS COMMAND
F81:	<xxxxxxxxxxxx> STNO IS SETUP WITH DVCFIG=<S0PP/S2PP/ANADEV> AND CAN ONLY BE DELETED IF SVC=ALL.
F82:	<xxxxxxxxxxxx> FOR PARAMETER IPPASSW EITHER "NONE" OR AT LEAST 6 ALPHA-NUMERICAL CHARACTERS MUST BE ENTERED
F83:	<xxxxxxxxxxxx> THE LAST FUNCTIONAL TERMINAL CANNOT BE DELETED SINCE THE FOLLOWING ASSOCIATED MSN NUMBERS CANNOT BE DISABLED AND THEREFORE NOT BE DELETED: <yyyyyy> <zzzzzz> ...
F84:	<xxxxxxxxxxxx> WITH OPT=<OPTI/OPTIEXP> FOR DVCFIG=<OPTISET/OPTIP500/OPTIIP/ ANADEV> ONLY TSI=<1/8> IS ALLOWED.
F87:	<xxxxxxxxxxxx> FUNCTIONAL TERMINALS CAN ONLY BE SET UP UNDER ONE STATION NUMBER IN THE OPTISET CONFIGURATION. THIS IS THE REASON WHY THEY MUST BE SET UP UNDER STATION NUMBER <zzzzzzzzzzzz> . TO BE ABLE TO ALSO ACCESS THESE TERMINALS UNDER <xxxxxxxxxxxx>, THE COMMAND ADD-SBCSU:STNO=<xxxxxxxxxxxx>,OPT=MSN,MAINO=<yyyyyyyyyyyy>; MUST BE EXECUTED SUBSEQUENTLY.
F88:	<xxxxxxxxxxxx> AN <OPTISET/OPTIIP> CONFIGURATION ON THE <WAML (FCTID=2)/ SLMQ3/STMI-HFA (FCTID=3)> MODULE CANNOT BE EXTENDED TO INCLUDE ADDITIONAL DEVICES.
F89:	<xxxxxxxxxxxx> A MAXIMUM NUMBER OF <ONE/2> <ANALOG DEVICE/OPTISET DEVICES> CAN BE SET UP IN THE OPTISET CONFIGURATION.
F90:	<xxxxxxxxxxxx> FOR A SIGNED OFF STATION DVCFIG=<OPTIIP/SET600/DTE/FAX/ BASE/RADIO/CMIADM/EXTLINE> IS NOT ALLOWED.
F91:	<xxxxxxxxxxxx> THE TERMINAL ADAPTER OPTIDA CANNOT BE DELETED, BECAUSE AT MAIN STATION <yyyyyyyyyyyy> THERE IS NO SOCKET LEFT FOR THE OPTIS0A TERMINAL ADAPTER NEEDED FOR CONNECTING S0 DEVICES
F93:	<xxxxxxxxxxxx> OPTICOM=Y CANNOT BE SET UNLESS ALL KEY FUNCTIONS OF THE ADD-ON DEVICES 3 AND 4 ARE SET TO "VACANT" (AMO TAPRO)
F94:	<xxxxxxxxxxxx> THE MAIN STATION NUMBER MAY NOT BE SIGNED OFF.
F95:	<xxxxxxxxxxxx> THE STMA MODULE DATA HAS NOT YET BEEN SET UP ( ADD-BDAT:LTG=<g>,LTU=<uu>,SLOT=<sss>,TYPE=STMA,OPMODE=GLOBAL, )
F96:	<xxxxxxxxxxxx> WITH VPI=<nnnnn>, FOR THIS STMA MODULE THE VALUE VCI=<mmmmm> IS NOT WITHIN THE PERMISSIBLE RANGE OF <aaaaa> AND <zzzzz> ( DISP-BDAT:LTG=<g>,LTU=<uu>,SLOT=<sss>,TYPE=STMA, OPMODE=GLOBAL; )
F97:	<xxxxxxxxxxxx> FOR THIS STMA MODULE THE COMBINATION VPI=<nnnnn> AND VCI=<mmmmm> ALREADY EXISTS : PEN STNO VPI VCI -------------------------------------------- <g-uu-sss-ccc> <xxxxxx> <nnnnn> <mmmmmm> <g-uu-sss-ccc> <xxxxxx> <nnnnn> <mmmmmm> : : : : : : : : <g-uu-sss-ccc> <xxxxxx> <nnnnn> <mmmmmm> <g-uu-sss-ccc> <xxxxxx> <nnnnn> <mmmmmm> --------------------------------------------
F98:	<xxxxxxxxxxxx> THE <STMIHFA1/STMIHFA2> BOARD CONFIGURATION DATA HAS NOT YET BEEN SET UP ( ADD-HFAB:MTYPE=<STMIHFA1/STMIHFA2>,LTU=<uu>,SLOT=<sss>, <SMODE=NORMAL,> IPADDR=??, <NETMASK=??,> )
F99:	<xxxxxxxxxxxx> THE STATION CANNOT BE ASSIGNED BECAUSE NO VIRTUAL NODE ID HAS BEEN DEFINED YET ( ADD-KNDEF:TYPE=OWN,NNO=??, )
F100	<xxxxxxxxxxxx> NO PARAMETERS PRESENT TO CHANGE STATION DATA
F101:	<xxxxxxxxxxxx> ^vartxt01^=^vartxt02^ CANNOT BE SPECIFIED IF ^vartxt03^=^vartxt04^ (AMO ^vartxt05^)
F103:	ITR GROUP OF <xxxxxxxxxxxx> CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F104:	COSX GROUP OF <xxxxxxxxxxxx> CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F105:	DPLN GROUP OF <xxxxxxxxxxxx> CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F106:	SECR PARAMETER OF <xxxxxxxxxxxx> CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F107:	<xxxxxxxxxxxx> DPLN <xxx> IS NOT ALLOWED FOR NODE <xxxxxxxxxx>.
F108:	<xxxxxxxxxxxx> THE NODE <xxxxxxxxxx> IS NOT PROPERLY CONFIGURED.
F109:	THE VIRTUAL NODE OF <xxxxxxxxxxxx> CANNOT BE CHANGED SINCE IT IS MEMBER OF AN ONS GROUP.
F110:	<xxxxxxxxxxxx> NOT ENOUGH FREE TSI FOUND AT PORT.
F113:	LICENSE VIOLATION AT SOFTGATE <xx>-<xx>. THEREFORE NEITHER ADDING NOR CHANGING OF SUBSCRIBERS IS POSSIBLE.
F114:	CHANGE NOT PERFORMED. SUBSCRIBER @@@@@@@@@@@@ IS CONFIGURED AS KEYSET
F115:	IT IS NOT ALLOWED TO HAVE CONFIGURED ADD-ONS AND BLF AT THE SAME TIME. (CHECK PARAMETERS REP AND BLF)
F116:	WRONG FORMAT FOR IP ADDRESS
F117:	: NOT POSSIBLE TO ASSIGN STATION, STMI PEN STATUS IS SIGNED OFF
F118:	: @@@@@@@@@@@@ CLIENT NUMBER IS USED BY ANOTHER SUBSCRIBER (DISP-SBCSU:@@@@@@@@@@@@;)
F119:	: CLIENT NUMBER @@@@@@@@@@@@ IS NOT ASSIGNED BY AMO SBCSU
F120:	: @@@@@@@@@@@@ PARAMETER IS IGNORED BECAUSE CLNTDESK IS USED ONLY FOR UFIP DEVICES
F121:	: USRID AND SECZONE ARE IGNORED BECAUSE THEY ARE USED ONLY FOR UFIP DEVICES
F122:	: SUBIPADD IS IGNORED BECAUSE IT IS USED ONLY FOR UFIP DEVICES
F123:	: @@@@@@@@@@@@ THE DEVICE IS NOT A PROPER DESK PHONE DEVICE (DISP-SBCSU:@@@@@@@@@@@@;)
F124:	: @@@@@@@@@@@@THIS STATION IS A CIRCUIT DESK PHONE PLEASE DELETE THE CIRCUIT CLIENT BEFORE REPEATING THIS COMMAND (DELETE-SBCSU:STNO=@@@@@@@@@@@@,SVC=ALL;)
F125:	: STATION @@@@@@@@@@@@ IS A TWIN DEVICE, CANNOT BE CONFIGURED AS DESK PHONE (DISP-KCSU:@@@@@@@@@@@@;)
F126:	: STATION @@@@@@@@@@@@ IS AN ONS MEMBER, CANNOT BE CONFIGURED AS DESK PHONE (DISP-AUN:STN,@@@@@@@@@@@@;)
F127:	: STATION @@@@@@@@@@@@ IS SET AS AGENT, CANNOT BE CONFIGURED AS DESK PHONE (DISP-SDAT:@@@@@@@@@@@@;)
F128:	: @@@@@@@@@@@@ Parameter IPPASSW contains characters which are not allowed for @@@@@@@@ station
F129:	: @@@@@@@@@@@@ IS A CIRCUIT CLIENT AND CANNOT BE DELETED WHILE IN ZIEL CFVAR=CLIENT IS CONFIGURED FOR CIRCUIT DESK @@@@@@@@@@@@. ( DELETE ZIEL:TYPE=FWD,SRCNO=@@@@@@@@@@@@,CFVAR=CLIENT; )
F130:	: STATION @@@@@@@@@@@@ CANNOT BE CONFIGURED AS DESK PHONE BECAUSE IT IS ASSIGNED IN A PU GROUP WITH TOO MANY MEMBERS (STNO'S + REMOTE LINKS)(DISP-AUN:STN,@@@@@@@@@@@@;)
F131:	: STATION @@@@@@@@@@@@ CANNOT BE CONFIGURED AS OSMO AND @@@@@@@@ IN THE SAME TIME.
F132:	: STATION @@@@@@@@@@@@ CANNOT BE CONFIGURED AS @@@@@@@@. THIS IS POSSIBLE ONLY FOR UFIP CLIENTS. PARAMETER CLNTDESK IS MISSING.@@@@@@@@@@@@ PARAMETER IS IGNORED BECAUSE CLNTDESK IS USED ONLY FOR UFIP DEVICES
F133:	: PRIMARY ASSOCIATED DEVICE NUMBER @@@@@@@@@@@@ IS NOT ASSIGNED BY AMO SBCSU
F134:	: DEVICE @@@@@@@@@@@@ IS NOT A PROPER PRIMARY ASSOCIATED DEVICE (DISP-SDAT:@@@@@@@@@@@@,SUBOV;)
F135:	: DEVICE @@@@@@@@@@@@ IS NOT A PROPER SECONDARY ASSOCIATED DEVICE
F136:	: THE DEVICE @@@@@@@@@@@@ CANNOT BE CLIENT AND SECONDARY ASSOCIATED DEVICE AT THE SAME TIME
F137:	: PRIMARY ASSOCIATED DEVICE @@@@@@@@@@@@ HAS MAXIMUM SECONDARY ASSOCIATED DEVICES. (DISP-SDAT:@@@@@@@@@@@@;)
F138:	: PRIMARY ASSOCIATED DEVICE @@@@@@@@@@@@ IS A CLIENT OR A SECONDARY ASSOCIATED DEVICE. (DISP-SDAT:@@@@@@@@@@@@;)
F139:	: THE SECONDARY ASSOCIATED DEVICE @@@@@@@@@@@@ CANNOT BE CLIENT.
F140:	: THIS IS A PRIMARY ASSOCIATED DEVICE.PLEASE DELETE SECONDARY ASSOCIATED DEVICE FIRST.
F141:	: THE PRIMDEV PARAMETER FOR AT LEAST ONE OF THE COPIN NUMBERS OF PRIMARY ASSOCIATED DEVICE @@@@@@@@@@@@ MUST BE SET TO 'YES'.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.